| /* |
| * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> |
| * |
| * Copyright 2015 Freescale Semiconductor, Inc. All Rights Reserved. |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| /dts-v1/; |
| #include "imx6q.dtsi" |
| #include "imx6qdl-tx6.dtsi" |
| |
| / { |
| model = "Ka-Ro electronics TX6Q-1020 Module"; |
| compatible = "karo,imx6q-tx6q", "fsl,imx6q"; |
| |
| backlight: backlight { |
| compatible = "pwm-backlight"; |
| pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; |
| power-supply = <®_3v3>; |
| /* |
| * a poor man's way to create a 1:1 relationship between |
| * the PWM value and the actual duty cycle |
| */ |
| brightness-levels = < 0 1 2 3 4 5 6 7 8 9 |
| 10 11 12 13 14 15 16 17 18 19 |
| 20 21 22 23 24 25 26 27 28 29 |
| 30 31 32 33 34 35 36 37 38 39 |
| 40 41 42 43 44 45 46 47 48 49 |
| 50 51 52 53 54 55 56 57 58 59 |
| 60 61 62 63 64 65 66 67 68 69 |
| 70 71 72 73 74 75 76 77 78 79 |
| 80 81 82 83 84 85 86 87 88 89 |
| 90 91 92 93 94 95 96 97 98 99 |
| 100>; |
| default-brightness-level = <50>; |
| }; |
| |
| lcd@0 { |
| compatible = "fsl,lcd"; |
| ipu_id = <0>; |
| disp_id = <0>; |
| default_ifmt = "RGB565"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_disp0_1>; |
| status = "okay"; |
| }; |
| }; |
| |
| &ds1339 { |
| status = "disabled"; |
| }; |
| |
| &gpmi { |
| status = "disabled"; |
| }; |
| |
| &iomuxc { |
| imx6qdl-tx6 { |
| pinctrl_usdhc4: usdhc4grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1 |
| MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1 |
| MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1 |
| MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1 |
| MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1 |
| MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1 |
| MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1 |
| >; |
| }; |
| }; |
| }; |
| |
| &usdhc4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc4>; |
| bus-width = <4>; |
| no-1-8-v; |
| fsl,wp-controller; |
| status = "okay"; |
| }; |
