arch/arm/boot/dts/imx6sx-sdb-reva.dts

/*
 * Copyright (C) 2015 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include "imx6sx-sdb.dtsi"

/ {
	model = "Freescale i.MX6 SoloX SDB RevA Board";

	regulators {
		/* Transceiver EN/STBY is active high on RevA board */
		reg_can_en: regulator@9 {
			gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
			enable-active-high;
		};

		reg_can_stby: regulator@10 {
			gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
			enable-active-high;
			vin-supply = <&reg_can_en>;
		};
	};
};

&cpu0 {
	operating-points = <
		/* kHz    uV */
		996000  1250000
		792000  1175000
		396000  1075000
		198000	975000
		>;
	fsl,soc-operating-points = <
		/* ARM kHz      SOC uV */
		996000	1175000
		792000	1175000
		396000	1175000
		198000	1175000
	>;
	arm-supply = <&sw1a_reg>;
	soc-supply = <&sw1c_reg>;
	fsl,arm-soc-shared = <0>;
};

&i2c1 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c1>;
	status = "okay";

	pmic: pfuze100@08 {
		compatible = "fsl,pfuze100";
		reg = <0x08>;

		regulators {
			sw1a_reg: sw1ab {
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <1875000>;
				regulator-boot-on;
				regulator-always-on;
				regulator-ramp-delay = <6250>;
			};

			sw1c_reg: sw1c {
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <1875000>;
				regulator-boot-on;
				regulator-always-on;
				regulator-ramp-delay = <6250>;
			};

			sw2_reg: sw2 {
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <3300000>;
				regulator-boot-on;
				regulator-always-on;
			};

			sw3a_reg: sw3a {
				regulator-min-microvolt = <400000>;
				regulator-max-microvolt = <1975000>;
				regulator-boot-on;
				regulator-always-on;
			};

			sw3b_reg: sw3b {
				regulator-min-microvolt = <400000>;
				regulator-max-microvolt = <1975000>;
				regulator-boot-on;
				regulator-always-on;
			};

			sw4_reg: sw4 {
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <3300000>;
			};

			swbst_reg: swbst {
				regulator-min-microvolt = <5000000>;
				regulator-max-microvolt = <5150000>;
			};

			snvs_reg: vsnvs {
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <3000000>;
				regulator-boot-on;
				regulator-always-on;
			};

			vref_reg: vrefddr {
				regulator-boot-on;
				regulator-always-on;
			};

			vgen1_reg: vgen1 {
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1550000>;
				regulator-always-on;
			};

			vgen2_reg: vgen2 {
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1550000>;
			};

			vgen3_reg: vgen3 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			vgen4_reg: vgen4 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			vgen5_reg: vgen5 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			vgen6_reg: vgen6 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};
		};
	};
};

&qspi2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_qspi2>;
	status = "okay";
	ddrsmp=<0>;

	flash0: s25fl128s@0 {
		reg = <0>;
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "spansion,s25fl128s";
		spi-max-frequency = <29000000>;
	};

	flash1: s25fl128s@1 {
		reg = <1>;
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "spansion,s25fl128s";
		spi-max-frequency = <29000000>;
	};
};