| menu "PCI host controller drivers" |
| depends on PCI |
| |
| config PCI_DRA7XX |
| bool "TI DRA7xx PCIe controller" |
| select PCIE_DW |
| depends on OF && HAS_IOMEM && TI_PIPE3 |
| help |
| Enables support for the PCIe controller in the DRA7xx SoC. There |
| are two instances of PCIe controller in DRA7xx. This controller can |
| act both as EP and RC. This reuses the Designware core. |
| |
| config PCI_MVEBU |
| bool "Marvell EBU PCIe controller" |
| depends on ARCH_MVEBU || ARCH_DOVE |
| depends on OF |
| |
| config PCIE_DW |
| bool |
| |
| config PCI_EXYNOS |
| bool "Samsung Exynos PCIe controller" |
| depends on SOC_EXYNOS5440 |
| select PCIEPORTBUS |
| select PCIE_DW |
| |
| config PCI_IMX6 |
| bool "Freescale i.MX6 PCIe controller" |
| depends on SOC_IMX6Q || SOC_IMX6SX || SOC_IMX7D |
| select PCIEPORTBUS |
| select PCIE_DW |
| |
| config PCI_IMX6_COMPLIANCE_TEST |
| bool "Enable pcie compliance tests on imx6" |
| depends on PCI_IMX6 |
| default n |
| help |
| Say Y here if you want do the compliance tests on imx6 pcie rc found |
| on FSL iMX SoCs. The pcie clks wouldn't be turned off, and the link |
| speed wouldn't be limited to gen1 when the Y is set here. |
| |
| config EP_MODE_IN_EP_RC_SYS |
| bool "PCI Express EP mode in the IMX6 RC/EP interconnection system" |
| depends on PCI_IMX6 |
| |
| config RC_MODE_IN_EP_RC_SYS |
| bool "PCI Express RC mode in the IMX6 RC/EP interconnection system" |
| depends on PCI_IMX6 && EP_MODE_IN_EP_RC_SYS!=y |
| |
| config PCI_IMX_EP_DRV |
| bool "i.MX6 PCI Express EP skeleton driver" |
| depends on RC_MODE_IN_EP_RC_SYS |
| default y |
| |
| config PCI_TEGRA |
| bool "NVIDIA Tegra PCIe controller" |
| depends on ARCH_TEGRA && !ARM64 |
| help |
| Say Y here if you want support for the PCIe host controller found |
| on NVIDIA Tegra SoCs. |
| |
| config PCI_RCAR_GEN2 |
| bool "Renesas R-Car Gen2 Internal PCI controller" |
| depends on ARCH_SHMOBILE || (ARM && COMPILE_TEST) |
| help |
| Say Y here if you want internal PCI support on R-Car Gen2 SoC. |
| There are 3 internal PCI controllers available with a single |
| built-in EHCI/OHCI host controller present on each one. |
| |
| config PCI_RCAR_GEN2_PCIE |
| bool "Renesas R-Car PCIe controller" |
| depends on ARCH_SHMOBILE || (ARM && COMPILE_TEST) |
| help |
| Say Y here if you want PCIe controller support on R-Car Gen2 SoCs. |
| |
| config PCI_HOST_GENERIC |
| bool "Generic PCI host controller" |
| depends on ARM && OF |
| help |
| Say Y here if you want to support a simple generic PCI host |
| controller, such as the one emulated by kvmtool. |
| |
| config PCIE_SPEAR13XX |
| bool "STMicroelectronics SPEAr PCIe controller" |
| depends on ARCH_SPEAR13XX |
| select PCIEPORTBUS |
| select PCIE_DW |
| help |
| Say Y here if you want PCIe support on SPEAr13XX SoCs. |
| |
| config PCI_KEYSTONE |
| bool "TI Keystone PCIe controller" |
| depends on ARCH_KEYSTONE |
| select PCIE_DW |
| select PCIEPORTBUS |
| help |
| Say Y here if you want to enable PCI controller support on Keystone |
| SoCs. The PCI controller on Keystone is based on Designware hardware |
| and therefore the driver re-uses the Designware core functions to |
| implement the driver. |
| |
| config PCIE_XILINX |
| bool "Xilinx AXI PCIe host bridge support" |
| depends on ARCH_ZYNQ |
| help |
| Say 'Y' here if you want kernel to support the Xilinx AXI PCIe |
| Host Bridge driver. |
| |
| config PCI_XGENE |
| bool "X-Gene PCIe controller" |
| depends on ARCH_XGENE |
| depends on OF |
| select PCIEPORTBUS |
| help |
| Say Y here if you want internal PCI support on APM X-Gene SoC. |
| There are 5 internal PCIe ports available. Each port is GEN3 capable |
| and have varied lanes from x1 to x8. |
| |
| config PCI_LAYERSCAPE |
| bool "Freescale Layerscape PCIe controller" |
| depends on OF && ARM |
| select PCIE_DW |
| select MFD_SYSCON |
| help |
| Say Y here if you want PCIe controller support on Layerscape SoCs. |
| |
| config PCI_VERSATILE |
| bool "ARM Versatile PB PCI controller" |
| depends on ARCH_VERSATILE |
| |
| config PCIE_IPROC |
| tristate "Broadcom iProc PCIe controller" |
| depends on OF && ARM |
| default n |
| help |
| This enables the iProc PCIe core controller support for Broadcom's |
| iProc family of SoCs. An appropriate bus interface driver also needs |
| to be enabled |
| |
| config PCIE_IPROC_PLATFORM |
| tristate "Broadcom iProc PCIe platform bus driver" |
| depends on ARCH_BCM_IPROC || (ARM && COMPILE_TEST) |
| depends on OF |
| select PCIE_IPROC |
| default ARCH_BCM_IPROC |
| help |
| Say Y here if you want to use the Broadcom iProc PCIe controller |
| through the generic platform bus interface |
| |
| endmenu |
