blob: 5e7c21952ce549d67986229d21f1d0d2fd7e4832 [file] [log] [blame]
/* Copyright 2013-2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of the above-listed copyright holders nor the
* names of any contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __FSL_DPMCP_H
#define __FSL_DPMCP_H
/* Data Path Management Command Portal API
* Contains initialization APIs and runtime control APIs for DPMCP
*/
struct fsl_mc_io;
/**
* dpmcp_open() - Open a control session for the specified object.
* @mc_io: Pointer to MC portal's I/O object
* @dpmcp_id: DPMCP unique ID
* @token: Returned token; use in subsequent API calls
*
* This function can be used to open a control session for an
* already created object; an object may have been declared in
* the DPL or by calling the dpmcp_create function.
* This function returns a unique authentication token,
* associated with the specific object ID and the specific MC
* portal; this token must be used in all subsequent commands for
* this specific object
*
* Return: '0' on Success; Error code otherwise.
*/
int dpmcp_open(struct fsl_mc_io *mc_io, int dpmcp_id, uint16_t *token);
/* Get portal ID from pool */
#define DPMCP_GET_PORTAL_ID_FROM_POOL (-1)
/**
* dpmcp_close() - Close the control session of the object
* @mc_io: Pointer to MC portal's I/O object
* @token: Token of DPMCP object
*
* After this function is called, no further operations are
* allowed on the object without opening a new control session.
*
* Return: '0' on Success; Error code otherwise.
*/
int dpmcp_close(struct fsl_mc_io *mc_io, uint16_t token);
/**
* struct dpmcp_cfg() - Structure representing DPMCP configuration
* @portal_id: Portal ID; 'DPMCP_GET_PORTAL_ID_FROM_POOL' to get the portal ID
* from pool
*/
struct dpmcp_cfg {
int portal_id;
};
/**
* dpmcp_create() - Create the DPMCP object.
* @mc_io: Pointer to MC portal's I/O object
* @cfg: Configuration structure
* @token: Returned token; use in subsequent API calls
*
* Create the DPMCP object, allocate required resources and
* perform required initialization.
*
* The object can be created either by declaring it in the
* DPL file, or by calling this function.
* This function returns a unique authentication token,
* associated with the specific object ID and the specific MC
* portal; this token must be used in all subsequent calls to
* this specific object. For objects that are created using the
* DPL file, call dpmcp_open function to get an authentication
* token first.
*
* Return: '0' on Success; Error code otherwise.
*/
int dpmcp_create(struct fsl_mc_io *mc_io,
const struct dpmcp_cfg *cfg,
uint16_t *token);
/**
* dpmcp_destroy() - Destroy the DPMCP object and release all its resources.
* @mc_io: Pointer to MC portal's I/O object
* @token: Token of DPMCP object
*
* Return: '0' on Success; error code otherwise.
*/
int dpmcp_destroy(struct fsl_mc_io *mc_io, uint16_t token);
/**
* dpmcp_reset() - Reset the DPMCP, returns the object to initial state.
* @mc_io: Pointer to MC portal's I/O object
* @token: Token of DPMCP object
*
* Return: '0' on Success; Error code otherwise.
*/
int dpmcp_reset(struct fsl_mc_io *mc_io, uint16_t token);
/* IRQ */
/*!
* @name dpmcp IRQ Index and Events
*/
#define DPMCP_IRQ_INDEX 0
/*!< Irq index */
#define DPMCP_IRQ_EVENT_CMD_DONE 0x00000001
/*!< irq event - Indicates that the link state changed */
/* @} */
/**
* dpmcp_set_irq() - Set IRQ information for the DPMCP to trigger an interrupt.
* @mc_io: Pointer to MC portal's I/O object
* @token: Token of DPMCP object
* @irq_index: Identifies the interrupt index to configure
* @irq_addr: Address that must be written to
* signal a message-based interrupt
* @irq_val: Value to write into irq_addr address
* @user_irq_id: A user defined number associated with this IRQ
*
* Return: '0' on Success; Error code otherwise.
*/
int dpmcp_set_irq(struct fsl_mc_io *mc_io,
uint16_t token,
uint8_t irq_index,
uint64_t irq_addr,
uint32_t irq_val,
int user_irq_id);
/**
* dpmcp_get_irq() - Get IRQ information from the DPMCP.
* @mc_io: Pointer to MC portal's I/O object
* @token: Token of DPMCP object
* @irq_index: The interrupt index to configure
* @type: Interrupt type: 0 represents message interrupt
* type (both irq_addr and irq_val are valid)
* @irq_addr: Returned address that must be written to
* signal the message-based interrupt
* @irq_val: Value to write into irq_addr address
* @user_irq_id: A user defined number associated with this IRQ
*
* Return: '0' on Success; Error code otherwise.
*/
int dpmcp_get_irq(struct fsl_mc_io *mc_io,
uint16_t token,
uint8_t irq_index,
int *type,
uint64_t *irq_addr,
uint32_t *irq_val,
int *user_irq_id);
/**
* dpmcp_set_irq_enable() - Set overall interrupt state.
* @mc_io: Pointer to MC portal's I/O object
* @token: Token of DPMCP object
* @irq_index: The interrupt index to configure
* @en: Interrupt state - enable = 1, disable = 0
*
* Allows GPP software to control when interrupts are generated.
* Each interrupt can have up to 32 causes. The enable/disable control's the
* overall interrupt state. if the interrupt is disabled no causes will cause
* an interrupt.
*
* Return: '0' on Success; Error code otherwise.
*/
int dpmcp_set_irq_enable(struct fsl_mc_io *mc_io,
uint16_t token,
uint8_t irq_index,
uint8_t en);
/**
* dpmcp_get_irq_enable() - Get overall interrupt state
* @mc_io: Pointer to MC portal's I/O object
* @token: Token of DPMCP object
* @irq_index: The interrupt index to configure
* @en: Returned interrupt state - enable = 1, disable = 0
*
* Return: '0' on Success; Error code otherwise.
*/
int dpmcp_get_irq_enable(struct fsl_mc_io *mc_io,
uint16_t token,
uint8_t irq_index,
uint8_t *en);
/**
* dpmcp_set_irq_mask() - Set interrupt mask.
* @mc_io: Pointer to MC portal's I/O object
* @token: Token of DPMCP object
* @irq_index: The interrupt index to configure
* @mask: Event mask to trigger interrupt;
* each bit:
* 0 = ignore event
* 1 = consider event for asserting IRQ
*
* Every interrupt can have up to 32 causes and the interrupt model supports
* masking/unmasking each cause independently
*
* Return: '0' on Success; Error code otherwise.
*/
int dpmcp_set_irq_mask(struct fsl_mc_io *mc_io,
uint16_t token,
uint8_t irq_index,
uint32_t mask);
/**
* dpmcp_get_irq_mask() - Get interrupt mask.
* @mc_io: Pointer to MC portal's I/O object
* @token: Token of DPMCP object
* @irq_index: The interrupt index to configure
* @mask: Returned event mask to trigger interrupt
*
* Every interrupt can have up to 32 causes and the interrupt model supports
* masking/unmasking each cause independently
*
* Return: '0' on Success; Error code otherwise.
*/
int dpmcp_get_irq_mask(struct fsl_mc_io *mc_io,
uint16_t token,
uint8_t irq_index,
uint32_t *mask);
/**
* dpmcp_get_irq_status() - Get the current status of any pending interrupts.
*
* @mc_io: Pointer to MC portal's I/O object
* @token: Token of DPMCP object
* @irq_index: The interrupt index to configure
* @status: Returned interrupts status - one bit per cause:
* 0 = no interrupt pending
* 1 = interrupt pending
*
* Return: '0' on Success; Error code otherwise.
*/
int dpmcp_get_irq_status(struct fsl_mc_io *mc_io,
uint16_t token,
uint8_t irq_index,
uint32_t *status);
/**
* dpmcp_clear_irq_status() - Clear a pending interrupt's status
*
* @mc_io: Pointer to MC portal's I/O object
* @token: Token of DPMCP object
* @irq_index: The interrupt index to configure
* @status: Bits to clear (W1C) - one bit per cause:
* 0 = don't change
* 1 = clear status bit
*
* Return: '0' on Success; Error code otherwise.
*/
int dpmcp_clear_irq_status(struct fsl_mc_io *mc_io,
uint16_t token,
uint8_t irq_index,
uint32_t status);
/**
* struct dpmcp_attr - Structure representing DPMCP attributes
* @id: DPMCP object ID
* @version: DPMCP version
*/
struct dpmcp_attr {
int id;
/**
* struct version - Structure representing DPMCP version
* @major: DPMCP major version
* @minor: DPMCP minor version
*/
struct {
uint16_t major;
uint16_t minor;
} version;
};
/**
* dpmcp_get_attributes - Retrieve DPMCP attributes.
*
* @mc_io: Pointer to MC portal's I/O object
* @token: Token of DPMCP object
* @attr: Returned object's attributes
*
* Return: '0' on Success; Error code otherwise.
*/
int dpmcp_get_attributes(struct fsl_mc_io *mc_io,
uint16_t token,
struct dpmcp_attr *attr);
#endif /* __FSL_DPMCP_H */