blob: 0b63812149176a7a9c6655f04112d9347ca007da [file] [log] [blame]
/*
* Renesas Emma Mobile 8250 driver
*
* Copyright (C) 2012 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/device.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/slab.h>
#include "8250.h"
#define UART_DLL_EM 9
#define UART_DLM_EM 10
struct serial8250_em_priv {
struct clk *sclk;
int line;
};
static void serial8250_em_serial_out(struct uart_port *p, int offset, int value)
{
switch (offset) {
case UART_TX: /* TX @ 0x00 */
writeb(value, p->membase);
break;
case UART_FCR: /* FCR @ 0x0c (+1) */
case UART_LCR: /* LCR @ 0x10 (+1) */
case UART_MCR: /* MCR @ 0x14 (+1) */
case UART_SCR: /* SCR @ 0x20 (+1) */
writel(value, p->membase + ((offset + 1) << 2));
break;
case UART_IER: /* IER @ 0x04 */
value &= 0x0f; /* only 4 valid bits - not Xscale */
/* fall-through */
case UART_DLL_EM: /* DLL @ 0x24 (+9) */
case UART_DLM_EM: /* DLM @ 0x28 (+9) */
writel(value, p->membase + (offset << 2));
}
}
static unsigned int serial8250_em_serial_in(struct uart_port *p, int offset)
{
switch (offset) {
case UART_RX: /* RX @ 0x00 */
return readb(p->membase);
case UART_MCR: /* MCR @ 0x14 (+1) */
case UART_LSR: /* LSR @ 0x18 (+1) */
case UART_MSR: /* MSR @ 0x1c (+1) */
case UART_SCR: /* SCR @ 0x20 (+1) */
return readl(p->membase + ((offset + 1) << 2));
case UART_IER: /* IER @ 0x04 */
case UART_IIR: /* IIR @ 0x08 */
case UART_DLL_EM: /* DLL @ 0x24 (+9) */
case UART_DLM_EM: /* DLM @ 0x28 (+9) */
return readl(p->membase + (offset << 2));
}
return 0;
}
static int serial8250_em_serial_dl_read(struct uart_8250_port *up)
{
return serial_in(up, UART_DLL_EM) | serial_in(up, UART_DLM_EM) << 8;
}
static void serial8250_em_serial_dl_write(struct uart_8250_port *up, int value)
{
serial_out(up, UART_DLL_EM, value & 0xff);
serial_out(up, UART_DLM_EM, value >> 8 & 0xff);
}
static int serial8250_em_probe(struct platform_device *pdev)
{
struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
struct serial8250_em_priv *priv;
struct uart_8250_port up;
int ret;
if (!regs || !irq) {
dev_err(&pdev->dev, "missing registers or irq\n");
return -EINVAL;
}
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->sclk = devm_clk_get(&pdev->dev, "sclk");
if (IS_ERR(priv->sclk)) {
dev_err(&pdev->dev, "unable to get clock\n");
return PTR_ERR(priv->sclk);
}
memset(&up, 0, sizeof(up));
up.port.mapbase = regs->start;
up.port.irq = irq->start;
up.port.type = PORT_UNKNOWN;
up.port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_IOREMAP;
up.port.dev = &pdev->dev;
up.port.private_data = priv;
clk_prepare_enable(priv->sclk);
up.port.uartclk = clk_get_rate(priv->sclk);
up.port.iotype = UPIO_MEM32;
up.port.serial_in = serial8250_em_serial_in;
up.port.serial_out = serial8250_em_serial_out;
up.dl_read = serial8250_em_serial_dl_read;
up.dl_write = serial8250_em_serial_dl_write;
ret = serial8250_register_8250_port(&up);
if (ret < 0) {
dev_err(&pdev->dev, "unable to register 8250 port\n");
clk_disable_unprepare(priv->sclk);
return ret;
}
priv->line = ret;
platform_set_drvdata(pdev, priv);
return 0;
}
static int serial8250_em_remove(struct platform_device *pdev)
{
struct serial8250_em_priv *priv = platform_get_drvdata(pdev);
serial8250_unregister_port(priv->line);
clk_disable_unprepare(priv->sclk);
return 0;
}
static const struct of_device_id serial8250_em_dt_ids[] = {
{ .compatible = "renesas,em-uart", },
{},
};
MODULE_DEVICE_TABLE(of, serial8250_em_dt_ids);
static struct platform_driver serial8250_em_platform_driver = {
.driver = {
.name = "serial8250-em",
.of_match_table = serial8250_em_dt_ids,
},
.probe = serial8250_em_probe,
.remove = serial8250_em_remove,
};
module_platform_driver(serial8250_em_platform_driver);
MODULE_AUTHOR("Magnus Damm");
MODULE_DESCRIPTION("Renesas Emma Mobile 8250 Driver");
MODULE_LICENSE("GPL v2");