blob: 185663e0b5f439af16065989a27ae74cc31a59b6 [file] [log] [blame]
/*
* platform.c - DesignWare HS OTG Controller platform driver
*
* Copyright (C) Matthijs Kooijman <matthijs@stdin.nl>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The names of the above-listed copyright holders may not be used
* to endorse or promote products derived from this software without
* specific prior written permission.
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation; either version 2 of the License, or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
* IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/of_device.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/usb/of.h>
#include "core.h"
#include "hcd.h"
static const char dwc2_driver_name[] = "dwc2";
static const struct dwc2_core_params params_bcm2835 = {
.otg_cap = 0, /* HNP/SRP capable */
.otg_ver = 0, /* 1.3 */
.dma_enable = 1,
.dma_desc_enable = 0,
.speed = 0, /* High Speed */
.enable_dynamic_fifo = 1,
.en_multiple_tx_fifo = 1,
.host_rx_fifo_size = 774, /* 774 DWORDs */
.host_nperio_tx_fifo_size = 256, /* 256 DWORDs */
.host_perio_tx_fifo_size = 512, /* 512 DWORDs */
.max_transfer_size = 65535,
.max_packet_count = 511,
.host_channels = 8,
.phy_type = 1, /* UTMI */
.phy_utmi_width = 8, /* 8 bits */
.phy_ulpi_ddr = 0, /* Single */
.phy_ulpi_ext_vbus = 0,
.i2c_enable = 0,
.ulpi_fs_ls = 0,
.host_support_fs_ls_low_power = 0,
.host_ls_low_power_phy_clk = 0, /* 48 MHz */
.ts_dline = 0,
.reload_ctl = 0,
.ahbcfg = 0x10,
.uframe_sched = 0,
};
static const struct dwc2_core_params params_rk3066 = {
.otg_cap = 2, /* non-HNP/non-SRP */
.otg_ver = -1,
.dma_enable = -1,
.dma_desc_enable = 0,
.speed = -1,
.enable_dynamic_fifo = 1,
.en_multiple_tx_fifo = -1,
.host_rx_fifo_size = 520, /* 520 DWORDs */
.host_nperio_tx_fifo_size = 128, /* 128 DWORDs */
.host_perio_tx_fifo_size = 256, /* 256 DWORDs */
.max_transfer_size = 65535,
.max_packet_count = -1,
.host_channels = -1,
.phy_type = -1,
.phy_utmi_width = -1,
.phy_ulpi_ddr = -1,
.phy_ulpi_ext_vbus = -1,
.i2c_enable = -1,
.ulpi_fs_ls = -1,
.host_support_fs_ls_low_power = -1,
.host_ls_low_power_phy_clk = -1,
.ts_dline = -1,
.reload_ctl = -1,
.ahbcfg = 0x7, /* INCR16 */
.uframe_sched = -1,
};
/**
* dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
* DWC_otg driver
*
* @dev: Platform device
*
* This routine is called, for example, when the rmmod command is executed. The
* device may or may not be electrically present. If it is present, the driver
* stops device processing. Any resources used on behalf of this device are
* freed.
*/
static int dwc2_driver_remove(struct platform_device *dev)
{
struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
if (hsotg->hcd_enabled)
dwc2_hcd_remove(hsotg);
if (hsotg->gadget_enabled)
s3c_hsotg_remove(hsotg);
return 0;
}
static const struct of_device_id dwc2_of_match_table[] = {
{ .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
{ .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
{ .compatible = "snps,dwc2", .data = NULL },
{ .compatible = "samsung,s3c6400-hsotg", .data = NULL},
{},
};
MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
/**
* dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg
* driver
*
* @dev: Platform device
*
* This routine creates the driver components required to control the device
* (core, HCD, and PCD) and initializes the device. The driver components are
* stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved
* in the device private data. This allows the driver to access the dwc2_hsotg
* structure on subsequent calls to driver methods for this device.
*/
static int dwc2_driver_probe(struct platform_device *dev)
{
const struct of_device_id *match;
const struct dwc2_core_params *params;
struct dwc2_core_params defparams;
struct dwc2_hsotg *hsotg;
struct resource *res;
struct phy *phy;
struct usb_phy *uphy;
int retval;
int irq;
match = of_match_device(dwc2_of_match_table, &dev->dev);
if (match && match->data) {
params = match->data;
} else {
/* Default all params to autodetect */
dwc2_set_all_params(&defparams, -1);
params = &defparams;
/*
* Disable descriptor dma mode by default as the HW can support
* it, but does not support it for SPLIT transactions.
*/
defparams.dma_desc_enable = 0;
}
hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
if (!hsotg)
return -ENOMEM;
hsotg->dev = &dev->dev;
/*
* Use reasonable defaults so platforms don't have to provide these.
*/
if (!dev->dev.dma_mask)
dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
retval = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
if (retval)
return retval;
irq = platform_get_irq(dev, 0);
if (irq < 0) {
dev_err(&dev->dev, "missing IRQ resource\n");
return irq;
}
dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
irq);
retval = devm_request_irq(hsotg->dev, irq,
dwc2_handle_common_intr, IRQF_SHARED,
dev_name(hsotg->dev), hsotg);
if (retval)
return retval;
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
hsotg->regs = devm_ioremap_resource(&dev->dev, res);
if (IS_ERR(hsotg->regs))
return PTR_ERR(hsotg->regs);
dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
(unsigned long)res->start, hsotg->regs);
hsotg->dr_mode = of_usb_get_dr_mode(dev->dev.of_node);
/*
* Attempt to find a generic PHY, then look for an old style
* USB PHY
*/
phy = devm_phy_get(&dev->dev, "usb2-phy");
if (IS_ERR(phy)) {
hsotg->phy = NULL;
uphy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2);
if (IS_ERR(uphy))
hsotg->uphy = NULL;
else
hsotg->uphy = uphy;
} else {
hsotg->phy = phy;
phy_power_on(hsotg->phy);
phy_init(hsotg->phy);
}
spin_lock_init(&hsotg->lock);
mutex_init(&hsotg->init_mutex);
if (hsotg->dr_mode != USB_DR_MODE_HOST) {
retval = dwc2_gadget_init(hsotg, irq);
if (retval)
return retval;
hsotg->gadget_enabled = 1;
}
if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
retval = dwc2_hcd_init(hsotg, irq, params);
if (retval) {
if (hsotg->gadget_enabled)
s3c_hsotg_remove(hsotg);
return retval;
}
hsotg->hcd_enabled = 1;
}
platform_set_drvdata(dev, hsotg);
return retval;
}
static int __maybe_unused dwc2_suspend(struct device *dev)
{
struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
int ret = 0;
if (dwc2_is_device_mode(dwc2)) {
ret = s3c_hsotg_suspend(dwc2);
} else {
if (dwc2->lx_state == DWC2_L0)
return 0;
phy_exit(dwc2->phy);
phy_power_off(dwc2->phy);
}
return ret;
}
static int __maybe_unused dwc2_resume(struct device *dev)
{
struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
int ret = 0;
if (dwc2_is_device_mode(dwc2)) {
ret = s3c_hsotg_resume(dwc2);
} else {
phy_power_on(dwc2->phy);
phy_init(dwc2->phy);
}
return ret;
}
static const struct dev_pm_ops dwc2_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume)
};
static struct platform_driver dwc2_platform_driver = {
.driver = {
.name = dwc2_driver_name,
.of_match_table = dwc2_of_match_table,
.pm = &dwc2_dev_pm_ops,
},
.probe = dwc2_driver_probe,
.remove = dwc2_driver_remove,
};
module_platform_driver(dwc2_platform_driver);
MODULE_DESCRIPTION("DESIGNWARE HS OTG Platform Glue");
MODULE_AUTHOR("Matthijs Kooijman <matthijs@stdin.nl>");
MODULE_LICENSE("Dual BSD/GPL");