| # | |
| # Drm device configuration | |
| # | |
| # This driver provides support for the | |
| # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher. | |
| # | |
| menuconfig DRM | |
| tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)" | |
| depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU | |
| select I2C | |
| select I2C_ALGOBIT | |
| select SLOW_WORK | |
| help | |
| Kernel-level support for the Direct Rendering Infrastructure (DRI) | |
| introduced in XFree86 4.0. If you say Y here, you need to select | |
| the module that's right for your graphics card from the list below. | |
| These modules provide support for synchronization, security, and | |
| DMA transfers. Please see <http://dri.sourceforge.net/> for more | |
| details. You should also select and configure AGP | |
| (/dev/agpgart) support if it is available for your platform. | |
| config DRM_KMS_HELPER | |
| tristate | |
| depends on DRM | |
| select FB | |
| select FRAMEBUFFER_CONSOLE if !EMBEDDED | |
| help | |
| FB and CRTC helpers for KMS drivers. | |
| config DRM_TTM | |
| tristate | |
| depends on DRM | |
| help | |
| GPU memory management subsystem for devices with multiple | |
| GPU memory types. Will be enabled automatically if a device driver | |
| uses it. | |
| config DRM_TDFX | |
| tristate "3dfx Banshee/Voodoo3+" | |
| depends on DRM && PCI | |
| help | |
| Choose this option if you have a 3dfx Banshee or Voodoo3 (or later), | |
| graphics card. If M is selected, the module will be called tdfx. | |
| config DRM_R128 | |
| tristate "ATI Rage 128" | |
| depends on DRM && PCI | |
| select FW_LOADER | |
| help | |
| Choose this option if you have an ATI Rage 128 graphics card. If M | |
| is selected, the module will be called r128. AGP support for | |
| this card is strongly suggested (unless you have a PCI version). | |
| config DRM_RADEON | |
| tristate "ATI Radeon" | |
| depends on DRM && PCI | |
| select FB_CFB_FILLRECT | |
| select FB_CFB_COPYAREA | |
| select FB_CFB_IMAGEBLIT | |
| select FW_LOADER | |
| select DRM_KMS_HELPER | |
| select DRM_TTM | |
| select POWER_SUPPLY | |
| select HWMON | |
| help | |
| Choose this option if you have an ATI Radeon graphics card. There | |
| are both PCI and AGP versions. You don't need to choose this to | |
| run the Radeon in plain VGA mode. | |
| If M is selected, the module will be called radeon. | |
| source "drivers/gpu/drm/radeon/Kconfig" | |
| config DRM_I810 | |
| tristate "Intel I810" | |
| # BKL usage in order to avoid AB-BA deadlocks, may become BROKEN_ON_SMP | |
| depends on DRM && AGP && AGP_INTEL && BKL | |
| help | |
| Choose this option if you have an Intel I810 graphics card. If M is | |
| selected, the module will be called i810. AGP support is required | |
| for this driver to work. | |
| choice | |
| prompt "Intel 830M, 845G, 852GM, 855GM, 865G" | |
| depends on DRM && AGP && AGP_INTEL | |
| optional | |
| config DRM_I830 | |
| tristate "i830 driver" | |
| # BKL usage in order to avoid AB-BA deadlocks, i830 may get removed | |
| depends on BKL | |
| help | |
| Choose this option if you have a system that has Intel 830M, 845G, | |
| 852GM, 855GM or 865G integrated graphics. If M is selected, the | |
| module will be called i830. AGP support is required for this driver | |
| to work. This driver is used by the older X releases X.org 6.7 and | |
| XFree86 4.3. If unsure, build this and i915 as modules and the X server | |
| will load the correct one. | |
| config DRM_I915 | |
| tristate "i915 driver" | |
| depends on AGP_INTEL | |
| select SHMEM | |
| select DRM_KMS_HELPER | |
| select FB_CFB_FILLRECT | |
| select FB_CFB_COPYAREA | |
| select FB_CFB_IMAGEBLIT | |
| # i915 depends on ACPI_VIDEO when ACPI is enabled | |
| # but for select to work, need to select ACPI_VIDEO's dependencies, ick | |
| select VIDEO_OUTPUT_CONTROL if ACPI | |
| select BACKLIGHT_CLASS_DEVICE if ACPI | |
| select INPUT if ACPI | |
| select ACPI_VIDEO if ACPI | |
| select ACPI_BUTTON if ACPI | |
| help | |
| Choose this option if you have a system that has Intel 830M, 845G, | |
| 852GM, 855GM 865G or 915G integrated graphics. If M is selected, the | |
| module will be called i915. AGP support is required for this driver | |
| to work. This driver is used by the Intel driver in X.org 6.8 and | |
| XFree86 4.4 and above. If unsure, build this and i830 as modules and | |
| the X server will load the correct one. | |
| config DRM_I915_KMS | |
| bool "Enable modesetting on intel by default" | |
| depends on DRM_I915 | |
| help | |
| Choose this option if you want kernel modesetting enabled by default, | |
| and you have a new enough userspace to support this. Running old | |
| userspaces with this enabled will cause pain. Note that this causes | |
| the driver to bind to PCI devices, which precludes loading things | |
| like intelfb. | |
| endchoice | |
| config DRM_MGA | |
| tristate "Matrox g200/g400" | |
| depends on DRM && PCI | |
| select FW_LOADER | |
| help | |
| Choose this option if you have a Matrox G200, G400 or G450 graphics | |
| card. If M is selected, the module will be called mga. AGP | |
| support is required for this driver to work. | |
| config DRM_SIS | |
| tristate "SiS video cards" | |
| depends on DRM && AGP | |
| depends on FB_SIS || FB_SIS=n | |
| help | |
| Choose this option if you have a SiS 630 or compatible video | |
| chipset. If M is selected the module will be called sis. AGP | |
| support is required for this driver to work. | |
| config DRM_VIA | |
| tristate "Via unichrome video cards" | |
| depends on DRM && PCI | |
| help | |
| Choose this option if you have a Via unichrome or compatible video | |
| chipset. If M is selected the module will be called via. | |
| config DRM_SAVAGE | |
| tristate "Savage video cards" | |
| depends on DRM && PCI | |
| help | |
| Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister | |
| chipset. If M is selected the module will be called savage. |