blob: a94701cbf1757d04ad0b894c039072d5cf8fd399 [file] [log] [blame]
/*
* (C) Copyright 2009 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/gpio.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/mx5x_pins.h>
#include <asm/arch/iomux.h>
#include <asm/errno.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
#include <i2c.h>
#include <mmc.h>
#include <fsl_esdhc.h>
#include <pmic.h>
#include <fsl_pmic.h>
#include <mc13892.h>
#include <usb/ehci-fsl.h>
#include <linux/fb.h>
#include <ipu_pixfmt.h>
#define MX51EVK_LCD_3V3 IMX_GPIO_NR(4, 9)
#define MX51EVK_LCD_5V IMX_GPIO_NR(4, 10)
#define MX51EVK_LCD_BACKLIGHT IMX_GPIO_NR(3, 4)
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_FSL_ESDHC
struct fsl_esdhc_cfg esdhc_cfg[2] = {
{MMC_SDHC1_BASE_ADDR},
{MMC_SDHC2_BASE_ADDR},
};
#endif
int dram_init(void)
{
/* dram_init must store complete ramsize in gd->ram_size */
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
PHYS_SDRAM_1_SIZE);
return 0;
}
u32 get_board_rev(void)
{
u32 rev = get_cpu_rev();
if (!gpio_get_value(IMX_GPIO_NR(1, 22)))
rev |= BOARD_REV_2_0 << BOARD_VER_OFFSET;
return rev;
}
static void setup_iomux_uart(void)
{
unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH;
mxc_request_iomux(MX51_PIN_UART1_RXD, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_UART1_RXD, pad | PAD_CTL_SRE_FAST);
mxc_request_iomux(MX51_PIN_UART1_TXD, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_UART1_TXD, pad | PAD_CTL_SRE_FAST);
mxc_request_iomux(MX51_PIN_UART1_RTS, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_UART1_RTS, pad);
mxc_request_iomux(MX51_PIN_UART1_CTS, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad);
}
static void setup_iomux_fec(void)
{
/*FEC_MDIO*/
mxc_request_iomux(MX51_PIN_EIM_EB2 , IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_EB2 , 0x1FD);
/*FEC_MDC*/
mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, 0x2004);
/* FEC RDATA[3] */
mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180);
/* FEC RDATA[2] */
mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180);
/* FEC RDATA[1] */
mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180);
/* FEC RDATA[0] */
mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180);
/* FEC TDATA[3] */
mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, 0x2004);
/* FEC TDATA[2] */
mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, 0x2004);
/* FEC TDATA[1] */
mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, 0x2004);
/* FEC TDATA[0] */
mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX51_PIN_NANDF_D8, 0x2004);
/* FEC TX_EN */
mxc_request_iomux(MX51_PIN_NANDF_CS7, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_NANDF_CS7, 0x2004);
/* FEC TX_ER */
mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, 0x2004);
/* FEC TX_CLK */
mxc_request_iomux(MX51_PIN_NANDF_RDY_INT, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_NANDF_RDY_INT, 0x2180);
/* FEC TX_COL */
mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180);
/* FEC RX_CLK */
mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180);
/* FEC RX_CRS */
mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_CS5, 0x180);
/* FEC RX_ER */
mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180);
/* FEC RX_DV */
mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX51_PIN_NANDF_D11, 0x2180);
}
#ifdef CONFIG_MXC_SPI
static void setup_iomux_spi(void)
{
/* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */
mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI, 0x105);
/* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */
mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO, 0x105);
/* de-select SS1 of instance: ecspi1. */
mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_CSPI1_SS1, 0x85);
/* 000: Select mux mode: ALT0 mux port: SS0 ecspi1 */
mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0, 0x185);
/* 000: Select mux mode: ALT0 mux port: RDY of instance: ecspi1. */
mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x180);
/* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */
mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK, 0x105);
}
#endif
#ifdef CONFIG_USB_EHCI_MX5
#define MX51EVK_USBH1_HUB_RST IOMUX_TO_GPIO(MX51_PIN_GPIO1_7) /* GPIO1_7 */
#define MX51EVK_USBH1_STP IOMUX_TO_GPIO(MX51_PIN_USBH1_STP) /* GPIO1_27 */
#define MX51EVK_USB_CLK_EN_B IOMUX_TO_GPIO(MX51_PIN_EIM_D18) /* GPIO2_1 */
#define MX51EVK_USB_PHY_RESET IOMUX_TO_GPIO(MX51_PIN_EIM_D21) /* GPIO2_5 */
#define USBH1_PAD (PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | \
PAD_CTL_100K_PU | PAD_CTL_PUE_PULL | \
PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE)
#define GPIO_PAD (PAD_CTL_DRV_HIGH | PAD_CTL_PKE_ENABLE | \
PAD_CTL_SRE_FAST)
#define NO_PAD (1 << 16)
static void setup_usb_h1(void)
{
setup_iomux_usb_h1();
/* GPIO_1_7 for USBH1 hub reset */
mxc_request_iomux(MX51_PIN_GPIO1_7, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_GPIO1_7, NO_PAD);
/* GPIO_2_1 */
mxc_request_iomux(MX51_PIN_EIM_D17, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_EIM_D17, GPIO_PAD);
/* GPIO_2_5 for USB PHY reset */
mxc_request_iomux(MX51_PIN_EIM_D21, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_EIM_D21, GPIO_PAD);
}
int board_ehci_hcd_init(int port)
{
/* Set USBH1_STP to GPIO and toggle it */
mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_GPIO);
mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USBH1_PAD);
gpio_direction_output(MX51EVK_USBH1_STP, 0);
gpio_direction_output(MX51EVK_USB_PHY_RESET, 0);
mdelay(10);
gpio_set_value(MX51EVK_USBH1_STP, 1);
/* Set back USBH1_STP to be function */
mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USBH1_PAD);
/* De-assert USB PHY RESETB */
gpio_set_value(MX51EVK_USB_PHY_RESET, 1);
/* Drive USB_CLK_EN_B line low */
gpio_direction_output(MX51EVK_USB_CLK_EN_B, 0);
/* Reset USB hub */
gpio_direction_output(MX51EVK_USBH1_HUB_RST, 0);
mdelay(2);
gpio_set_value(MX51EVK_USBH1_HUB_RST, 1);
return 0;
}
#endif
static void power_init(void)
{
unsigned int val;
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
struct pmic *p;
pmic_init();
p = get_pmic();
/* Write needed to Power Gate 2 register */
pmic_reg_read(p, REG_POWER_MISC, &val);
val &= ~PWGT2SPIEN;
pmic_reg_write(p, REG_POWER_MISC, val);
/* Externally powered */
pmic_reg_read(p, REG_CHARGE, &val);
val |= ICHRG0 | ICHRG1 | ICHRG2 | ICHRG3 | CHGAUTOB;
pmic_reg_write(p, REG_CHARGE, val);
/* power up the system first */
pmic_reg_write(p, REG_POWER_MISC, PWUP);
/* Set core voltage to 1.1V */
pmic_reg_read(p, REG_SW_0, &val);
val = (val & ~SWx_VOLT_MASK) | SWx_1_100V;
pmic_reg_write(p, REG_SW_0, val);
/* Setup VCC (SW2) to 1.25 */
pmic_reg_read(p, REG_SW_1, &val);
val = (val & ~SWx_VOLT_MASK) | SWx_1_250V;
pmic_reg_write(p, REG_SW_1, val);
/* Setup 1V2_DIG1 (SW3) to 1.25 */
pmic_reg_read(p, REG_SW_2, &val);
val = (val & ~SWx_VOLT_MASK) | SWx_1_250V;
pmic_reg_write(p, REG_SW_2, val);
udelay(50);
/* Raise the core frequency to 800MHz */
writel(0x0, &mxc_ccm->cacrr);
/* Set switchers in Auto in NORMAL mode & STANDBY mode */
/* Setup the switcher mode for SW1 & SW2*/
pmic_reg_read(p, REG_SW_4, &val);
val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) |
(SWMODE_MASK << SWMODE2_SHIFT)));
val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) |
(SWMODE_AUTO_AUTO << SWMODE2_SHIFT);
pmic_reg_write(p, REG_SW_4, val);
/* Setup the switcher mode for SW3 & SW4 */
pmic_reg_read(p, REG_SW_5, &val);
val = (val & ~((SWMODE_MASK << SWMODE3_SHIFT) |
(SWMODE_MASK << SWMODE4_SHIFT)));
val |= (SWMODE_AUTO_AUTO << SWMODE3_SHIFT) |
(SWMODE_AUTO_AUTO << SWMODE4_SHIFT);
pmic_reg_write(p, REG_SW_5, val);
/* Set VDIG to 1.65V, VGEN3 to 1.8V, VCAM to 2.6V */
pmic_reg_read(p, REG_SETTING_0, &val);
val &= ~(VCAM_MASK | VGEN3_MASK | VDIG_MASK);
val |= VDIG_1_65 | VGEN3_1_8 | VCAM_2_6;
pmic_reg_write(p, REG_SETTING_0, val);
/* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */
pmic_reg_read(p, REG_SETTING_1, &val);
val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK);
val |= VSD_3_15 | VAUDIO_3_0 | VVIDEO_2_775;
pmic_reg_write(p, REG_SETTING_1, val);
/* Configure VGEN3 and VCAM regulators to use external PNP */
val = VGEN3CONFIG | VCAMCONFIG;
pmic_reg_write(p, REG_MODE_1, val);
udelay(200);
/* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */
val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG |
VVIDEOEN | VAUDIOEN | VSDEN;
pmic_reg_write(p, REG_MODE_1, val);
mxc_request_iomux(MX51_PIN_EIM_A20, IOMUX_CONFIG_ALT1);
gpio_direction_output(IMX_GPIO_NR(2, 14), 0);
udelay(500);
gpio_set_value(IMX_GPIO_NR(2, 14), 1);
}
#ifdef CONFIG_FSL_ESDHC
int board_mmc_getcd(struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
int ret;
mxc_request_iomux(MX51_PIN_GPIO1_0, IOMUX_CONFIG_ALT1);
gpio_direction_input(IMX_GPIO_NR(1, 0));
mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0);
gpio_direction_input(IMX_GPIO_NR(1, 6));
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
ret = !gpio_get_value(IMX_GPIO_NR(1, 0));
else
ret = !gpio_get_value(IMX_GPIO_NR(1, 6));
return ret;
}
int board_mmc_init(bd_t *bis)
{
u32 index;
s32 status = 0;
for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM;
index++) {
switch (index) {
case 0:
mxc_request_iomux(MX51_PIN_SD1_CMD,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_request_iomux(MX51_PIN_SD1_CLK,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_request_iomux(MX51_PIN_SD1_DATA0,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_request_iomux(MX51_PIN_SD1_DATA1,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_request_iomux(MX51_PIN_SD1_DATA2,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_request_iomux(MX51_PIN_SD1_DATA3,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_iomux_set_pad(MX51_PIN_SD1_CMD,
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
PAD_CTL_PUE_PULL |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_SD1_CLK,
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
PAD_CTL_HYS_NONE | PAD_CTL_47K_PU |
PAD_CTL_PUE_PULL |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_SD1_DATA0,
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
PAD_CTL_PUE_PULL |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_SD1_DATA1,
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
PAD_CTL_PUE_PULL |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_SD1_DATA2,
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
PAD_CTL_PUE_PULL |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_SD1_DATA3,
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PD |
PAD_CTL_PUE_PULL |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
mxc_request_iomux(MX51_PIN_GPIO1_0,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_iomux_set_pad(MX51_PIN_GPIO1_0,
PAD_CTL_HYS_ENABLE);
mxc_request_iomux(MX51_PIN_GPIO1_1,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_iomux_set_pad(MX51_PIN_GPIO1_1,
PAD_CTL_HYS_ENABLE);
break;
case 1:
mxc_request_iomux(MX51_PIN_SD2_CMD,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_request_iomux(MX51_PIN_SD2_CLK,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_request_iomux(MX51_PIN_SD2_DATA0,
IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX51_PIN_SD2_DATA1,
IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX51_PIN_SD2_DATA2,
IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX51_PIN_SD2_DATA3,
IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_SD2_CMD,
PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_SD2_CLK,
PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_SD2_DATA0,
PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_SD2_DATA1,
PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_SD2_DATA2,
PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_SD2_DATA3,
PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
PAD_CTL_SRE_FAST);
mxc_request_iomux(MX51_PIN_SD2_CMD,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_request_iomux(MX51_PIN_GPIO1_6,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_iomux_set_pad(MX51_PIN_GPIO1_6,
PAD_CTL_HYS_ENABLE);
mxc_request_iomux(MX51_PIN_GPIO1_5,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_iomux_set_pad(MX51_PIN_GPIO1_5,
PAD_CTL_HYS_ENABLE);
break;
default:
printf("Warning: you configured more ESDHC controller"
"(%d) as supported by the board(2)\n",
CONFIG_SYS_FSL_ESDHC_NUM);
return status;
}
status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
}
return status;
}
#endif
static struct fb_videomode claa_wvga = {
.name = "CLAA07LC0ACW",
.refresh = 57,
.xres = 800,
.yres = 480,
.pixclock = 37037,
.left_margin = 40,
.right_margin = 60,
.upper_margin = 10,
.lower_margin = 10,
.hsync_len = 20,
.vsync_len = 10,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED
};
void lcd_iomux(void)
{
/* DI2_PIN15 */
mxc_request_iomux(MX51_PIN_DI_GP4, IOMUX_CONFIG_ALT4);
/* Pad settings for MX51_PIN_DI2_DISP_CLK */
mxc_iomux_set_pad(MX51_PIN_DI2_DISP_CLK, PAD_CTL_HYS_NONE |
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_MAX | PAD_CTL_SRE_SLOW);
/* Turn on 3.3V voltage for LCD */
mxc_request_iomux(MX51_PIN_CSI2_D12, IOMUX_CONFIG_ALT3);
gpio_direction_output(MX51EVK_LCD_3V3, 1);
/* Turn on 5V voltage for LCD */
mxc_request_iomux(MX51_PIN_CSI2_D13, IOMUX_CONFIG_ALT3);
gpio_direction_output(MX51EVK_LCD_5V, 1);
/* Turn on GPIO backlight */
mxc_request_iomux(MX51_PIN_DI1_D1_CS, IOMUX_CONFIG_ALT4);
mxc_iomux_set_input(MX51_GPIO3_IPP_IND_G_IN_4_SELECT_INPUT,
INPUT_CTL_PATH1);
gpio_direction_output(MX51EVK_LCD_BACKLIGHT, 1);
}
void lcd_enable(void)
{
int ret = ipuv3_fb_init(&claa_wvga, 1, IPU_PIX_FMT_RGB565);
if (ret)
printf("LCD cannot be configured: %d\n", ret);
}
int board_early_init_f(void)
{
setup_iomux_uart();
setup_iomux_fec();
#ifdef CONFIG_USB_EHCI_MX5
setup_usb_h1();
#endif
lcd_iomux();
return 0;
}
int board_init(void)
{
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
lcd_enable();
return 0;
}
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
#ifdef CONFIG_MXC_SPI
setup_iomux_spi();
power_init();
#endif
return 0;
}
#endif
/*
* Do not overwrite the console
* Use always serial for U-Boot console
*/
int overwrite_console(void)
{
return 1;
}
int checkboard(void)
{
puts("Board: MX51EVK\n");
return 0;
}