| # arch/arm/mach-s3c64xx/Makefile | |
| # | |
| # Copyright 2008 Openmoko, Inc. | |
| # Copyright 2008 Simtec Electronics | |
| # | |
| # Licensed under GPLv2 | |
| obj-y := | |
| obj-m := | |
| obj-n := | |
| obj- := | |
| # Core files | |
| obj-y += cpu.o | |
| obj-y += clock.o | |
| obj-y += gpiolib.o | |
| # Core support for S3C6400 system | |
| obj-$(CONFIG_CPU_S3C6400) += s3c6400.o | |
| obj-$(CONFIG_CPU_S3C6410) += s3c6410.o | |
| obj-y += irq.o | |
| obj-y += irq-eint.o | |
| # CPU frequency scaling | |
| obj-$(CONFIG_CPU_FREQ_S3C64XX) += cpufreq.o | |
| # DMA support | |
| obj-$(CONFIG_S3C64XX_DMA) += dma.o | |
| # Device setup | |
| obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o | |
| obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o | |
| obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o | |
| obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o | |
| obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o | |
| obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o | |
| obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o | |
| # PM | |
| obj-$(CONFIG_PM) += pm.o | |
| obj-$(CONFIG_PM) += sleep.o | |
| obj-$(CONFIG_PM) += irq-pm.o | |
| # Machine support | |
| obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o | |
| obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o | |
| obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o | |
| obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o | |
| obj-$(CONFIG_MACH_MINI6410) += mach-mini6410.o | |
| obj-$(CONFIG_MACH_NCP) += mach-ncp.o | |
| obj-$(CONFIG_MACH_HMT) += mach-hmt.o | |
| obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o | |
| obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o | |
| obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o | |
| # device support | |
| obj-y += dev-uart.o | |
| obj-y += dev-audio.o | |
| obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o | |
| obj-$(CONFIG_S3C64XX_DEV_TS) += dev-ts.o | |
| obj-$(CONFIG_S3C64XX_DEV_ONENAND1) += dev-onenand1.o |