| # |
| # Copyright (c) 2010-2016 Nest, Inc. |
| # All rights reserved. |
| # |
| # This document is the property of Nest. It is considered |
| # confidential and proprietary information. |
| # |
| # This document may not be reproduced or transmitted in any form, |
| # in whole or in part, without the express written permission of |
| # Nest. |
| # |
| # Description: |
| # This file is the makefile for the library and command line |
| # utility for transferring files with URL syntax, libcurl and |
| # curl, respectively. |
| # |
| |
| include pre.mak |
| |
| PackageName := curl |
| |
| PackageExtension := tar.gz |
| PackageSeparator := - |
| |
| PackagePatchArgs := -p1 |
| |
| PackageArchive := $(PackageName).$(PackageExtension) |
| PackageSourceDir := $(PackageName)$(PackageSeparator)$(PackageVersion) |
| |
| PackageBuildMakefile = $(call GenerateBuildPaths,Makefile) |
| |
| CleanPaths += $(PackageLicenseFile) |
| |
| SOURCEDIRS = $(PackageSourceDir) |
| $(PackageSourceDir)_RULE_TARGET = $(BuildDirectory)/configure |
| |
| all: $(PackageDefaultGoal) |
| |
| # Generate the package license contents. |
| |
| $(PackageSourceDir)/COPYING: $(BuildDirectory)/source |
| |
| $(PackageLicenseFile): $(PackageSourceDir)/COPYING |
| $(copy-result) |
| |
| # Extract the source from the archive and apply patches, if any. |
| |
| $(PackageSourceDir): $(PackageArchive) $(PackagePatchPaths) |
| $(expand-and-patch-package) |
| |
| # Prepare the sources. |
| |
| $(BuildDirectory)/source: | $(PackageSourceDir) |
| $(Verbose)touch $@ |
| |
| .PHONY: source |
| source: $(BuildDirectory)/source |
| |
| # Patch the sources, if necessary. |
| |
| $(BuildDirectory)/patch: $(BuildDirectory)/source |
| $(Verbose)touch $@ |
| |
| .PHONY: patch |
| patch: $(BuildDirectory)/patch |
| |
| # Generate the package build makefile. |
| # |
| # For non-cross-compiled targets (e.g. simulators), the curl configure |
| # attempts to perform run-time tests. |
| # |
| # To ensure this works against the in-project versions of openssl and |
| # zlib, the paths to these shared objects MUST be found by the dynamic |
| # loader. |
| |
| $(BuildDirectory)/configure: export $(LoaderSearchPath) := $(OpenSSLLibraryPath):$(dir $(ZlibLibraryPath)):$($(LoaderSearchPath)) |
| |
| # Configure the source for building. |
| |
| $(BuildDirectory)/configure: $(BuildDirectory)/source | $(PackageSourceDir) $(BuildDirectory) |
| $(Verbose)cd $(BuildDirectory) && \ |
| $(CURDIR)/$(PackageSourceDir)/configure \ |
| INSTALL="$(INSTALL) $(INSTALLFLAGS)" \ |
| CC="$(CC) $(CPPOPTFLAGS)" CXX="$(CXX) $(CPPOPTFLAGS)" AR=$(AR) RANLIB=$(RANLIB) STRIP=$(STRIP) \ |
| CPPFLAGS="$(call ToolGenerateIncludeArgument,$(OpenSSLIncludePath)) \ |
| $(call ToolGenerateIncludeArgument,$(LinuxIncludePath))" \ |
| LDFLAGS="$(call GenerateResolveArguments,$(ZlibDependPath)) \ |
| $(call GenerateResolveArguments,$(OpenSSLDependPaths)) \ |
| $(call ToolGenerateLibraryPathArgument,$(OpenSSLLibraryPath))" \ |
| --build=$(HostTuple) \ |
| --host=$(TargetTuple) \ |
| $(CurlPackageOptions) \ |
| --disable-ares \ |
| --disable-dict \ |
| --disable-gopher \ |
| --disable-imap \ |
| --disable-ldap \ |
| --disable-ldaps \ |
| --disable-manual \ |
| --disable-ntlm-wb \ |
| --disable-pop3 \ |
| --disable-rtsp \ |
| --disable-smtp \ |
| --disable-telnet \ |
| --enable-ipv6 \ |
| --with-ssl=$(OpenSSLPrefixPath) \ |
| --with-zlib=$(ZlibPrefixPath) \ |
| --without-libidn \ |
| --prefix=$(addprefix $(LibPrefixConfigOption),/usr) \ |
| --sysconfdir=$(addprefix $(LibPrefixConfigOption),/etc) \ |
| --localstatedir=$(addprefix $(LibPrefixConfigOption),/var) \ |
| --disable-static |
| $(Verbose)touch $@ |
| |
| .PHONY: configure |
| configure: $(BuildDirectory)/configure |
| |
| # Build the source. |
| # |
| # We have to unset MAKEFLAGS since they confuse the package build otherwise. |
| |
| $(BuildDirectory)/build: $(BuildDirectory)/configure |
| $(Verbose)unset MAKEFLAGS && \ |
| $(MAKE) $(JOBSFLAG) -C $(BuildDirectory) all |
| $(Verbose)touch $@ |
| |
| .PHONY: build |
| build: $(BuildDirectory)/build |
| |
| # Stage the build to a temporary installation area. |
| # |
| # We have to unset MAKEFLAGS since they confuse the package build otherwise. |
| # |
| # We explictly remove 'libcurl.la' because some packages that depend |
| # on libcurl use libtool. If libtool finds a '*.la' file for a |
| # library, it uses the value of 'libdir=<dir>' it finds. In our case, |
| # since '--prefix=/usr' this value is '/usr/lib'. It then resolves |
| # '-lcurl' to '/usr/lib/libcurl.so'. In a cross-compilation |
| # environment, this is likely to be neither the right architecture nor |
| # the right version to link against. In short, we lose. |
| # |
| # We could also handle this by removing DESTDIR and setting the prefix |
| # to $(ResultDirectory); however, that results in libtool hard-coding |
| # $(ResultDirectory) as the RPATH in the linked executables which is |
| # NOT what we want either. We lose again. |
| # |
| # By removing the '*.la' file, we win by ensuring neither a misdirected |
| # link nor an RPATH. |
| |
| $(BuildDirectory)/stage: $(BuildDirectory)/build | $(ResultDirectory) |
| $(Verbose)unset MAKEFLAGS && \ |
| $(MAKE) $(JOBSFLAG) -C $(BuildDirectory) $(call GenerateLibraryDestinationArgument,$(ResultDirectory)) install |
| $(Verbose)$(RM) $(RMFLAGS) $(call GenerateResultPaths,,usr/lib/libcurl.la) |
| $(Verbose)touch $@ |
| |
| .PHONY: stage |
| stage: $(BuildDirectory)/stage |
| |
| clean: |
| $(Verbose)$(RM) $(RMFLAGS) -r $(PackageSourceDir) |
| $(Verbose)$(RM) $(RMFLAGS) -r $(BuildDirectory) |
| $(Verbose)$(RM) $(RMFLAGS) -r $(ResultDirectory) |
| |
| include post.mak |