blob: d3058768b23de17e4c9916c2552b1266b9263d56 [file] [log] [blame]
Applied Micro X-Gene SoC DMA nodes
DMA nodes are defined to describe on-chip DMA interfaces in
APM X-Gene SoC.
Required properties for DMA interfaces:
- compatible: Should be "apm,xgene-dma".
- device_type: set to "dma".
- reg: Address and length of the register set for the device.
It contains the information of registers in the following order:
1st - DMA control and status register address space.
2nd - Descriptor ring control and status register address space.
3rd - Descriptor ring command register address space.
4th - Soc efuse register address space.
- interrupts: DMA has 5 interrupts sources. 1st interrupt is
DMA error reporting interrupt. 2nd, 3rd, 4th and 5th interrupts
are completion interrupts for each DMA channels.
- clocks: Reference to the clock entry.
Optional properties:
- dma-coherent : Present if dma operations are coherent
dmaclk: dmaclk@1f27c000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
clocks = <&socplldiv2 0>;
reg = <0x0 0x1f27c000 0x0 0x1000>;
reg-names = "csr-reg";
clock-output-names = "dmaclk";
dma: dma@1f270000 {
compatible = "apm,xgene-storm-dma";
device_type = "dma";
reg = <0x0 0x1f270000 0x0 0x10000>,
<0x0 0x1f200000 0x0 0x10000>,
<0x0 0x1b008000 0x0 0x2000>,
<0x0 0x1054a000 0x0 0x100>;
interrupts = <0x0 0x82 0x4>,
<0x0 0xb8 0x4>,
<0x0 0xb9 0x4>,
<0x0 0xba 0x4>,
<0x0 0xbb 0x4>;
clocks = <&dmaclk 0>;