blob: 3fed3c12441161926fb78590016b59bb90c78448 [file] [log] [blame]
* Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller
Required properties:
- compatible : Should be "smsc,lan<model>", "smsc,lan9115"
- reg : Address and length of the io space for SMSC LAN
- interrupts : Should contain SMSC LAN interrupt line
- interrupt-parent : Should be the phandle for the interrupt controller
that services interrupts for this device
- phy-mode : See ethernet.txt file in the same directory
Optional properties:
- reg-shift : Specify the quantity to shift the register offsets by
- reg-io-width : Specify the size (in bytes) of the IO accesses that
should be performed on the device. Valid value for SMSC LAN is
2 or 4. If it's omitted or invalid, the size would be 2.
- smsc,irq-active-high : Indicates the IRQ polarity is active-high
- smsc,irq-push-pull : Indicates the IRQ type is push-pull
- smsc,force-internal-phy : Forces SMSC LAN controller to use
internal PHY
- smsc,force-external-phy : Forces SMSC LAN controller to use
external PHY
- smsc,save-mac-address : Indicates that mac address needs to be saved
before resetting the controller
lan9220@f4000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0xf4000000 0x2000000>;
phy-mode = "mii";
interrupt-parent = <&gpio1>;
interrupts = <31>;
reg-io-width = <4>;