| Intersil ISL9305/ISL9305H voltage regulator |
| |
| Required properties: |
| |
| - compatible: "isil,isl9305" or "isil,isl9305h" |
| - reg: I2C slave address, usually 0x68. |
| - regulators: A node that houses a sub-node for each regulator within the |
| device. Each sub-node is identified using the node's name, with valid |
| values being "dcd1", "dcd2", "ldo1" and "ldo2". The content of each sub-node |
| is defined by the standard binding for regulators; see regulator.txt. |
| - VINDCD1-supply: A phandle to a regulator node supplying VINDCD1. |
| VINDCD2-supply: A phandle to a regulator node supplying VINDCD2. |
| VINLDO1-supply: A phandle to a regulator node supplying VINLDO1. |
| VINLDO2-supply: A phandle to a regulator node supplying VINLDO2. |
| |
| Optional properties: |
| - Per-regulator optional properties are defined in regulator.txt |
| |
| Example |
| |
| pmic: isl9305@68 { |
| compatible = "isil,isl9305"; |
| reg = <0x68>; |
| |
| VINDCD1-supply = <&system_power>; |
| VINDCD2-supply = <&system_power>; |
| VINLDO1-supply = <&system_power>; |
| VINLDO2-supply = <&system_power>; |
| |
| regulators { |
| dcd1 { |
| regulator-name = "VDD_DSP"; |
| regulator-always-on; |
| }; |
| }; |
| }; |
