blob: e85f37ec33f0277b27ab7aa4f39c4b34c4cbfcd2 [file] [log] [blame]
* Samsung's UART Controller
The Samsung's UART controller is used for interfacing SoC with serial
communicaion devices.
Required properties:
- compatible: should be one of following:
- "samsung,exynos4210-uart" - Exynos4210 SoC,
- "samsung,s3c2410-uart" - compatible with ports present on S3C2410 SoC,
- "samsung,s3c2412-uart" - compatible with ports present on S3C2412 SoC,
- "samsung,s3c2440-uart" - compatible with ports present on S3C2440 SoC,
- "samsung,s3c6400-uart" - compatible with ports present on S3C6400 SoC,
- "samsung,s5pv210-uart" - compatible with ports present on S5PV210 SoC.
- reg: base physical address of the controller and length of memory mapped
- interrupts: a single interrupt signal to SoC interrupt controller,
according to interrupt bindings documentation [1].
- clock-names: input names of clocks used by the controller:
- "uart" - controller bus clock,
- "clk_uart_baudN" - Nth baud base clock input (N = 0, 1, ...),
according to SoC User's Manual (only N = 0 is allowedfor SoCs without
internal baud clock mux).
- clocks: phandles and specifiers for all clocks specified in "clock-names"
property, in the same order, according to clock bindings documentation [2].
[1] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
[2] Documentation/devicetree/bindings/clock/clock-bindings.txt
Optional properties:
- samsung,uart-fifosize: The fifo size supported by the UART channel
Note: Each Samsung UART should have an alias correctly numbered in the
"aliases" node, according to serialN format, where N is the port number
(non-negative decimal integer) as specified by User's Manual of respective
aliases {
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
uart1: serial@7f005400 {
compatible = "samsung,s3c6400-uart";
reg = <0x7f005400 0x100>;
interrupt-parent = <&vic1>;
interrupts = <6>;
clock-names = "uart", "clk_uart_baud2",
clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
<&clocks SCLK_UART>;
samsung,uart-fifosize = <16>;