blob: 0c491bda4c65f9bace70c051fc06389261d82cad [file] [log] [blame]
* Rockchip SPI Controller
The Rockchip SPI controller is used to interface with various devices such as flash
and display controllers using the SPI communication interface.
Required Properties:
- compatible: should be one of the following.
"rockchip,rk3066-spi" for rk3066.
"rockchip,rk3188-spi", "rockchip,rk3066-spi" for rk3188.
"rockchip,rk3288-spi", "rockchip,rk3066-spi" for rk3288.
- reg: physical base address of the controller and length of memory mapped
- interrupts: The interrupt number to the cpu. The interrupt specifier format
depends on the interrupt controller.
- clocks: Must contain an entry for each entry in clock-names.
- clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for
the peripheral clock.
- #address-cells: should be 1.
- #size-cells: should be 0.
Optional Properties:
- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
- dma-names: DMA request names should include "tx" and "rx" if present.
- rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling
Rx data (may need to be fine tuned for high capacitance lines).
No delay (0) by default.
spi0: spi@ff110000 {
compatible = "rockchip,rk3066-spi";
reg = <0xff110000 0x1000>;
dmas = <&pdma1 11>, <&pdma1 12>;
dma-names = "tx", "rx";
rx-sample-delay-ns = <10>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
clock-names = "spiclk", "apb_pclk";