blob: 8f8cbb3bde52bc5025f751a1ad2bbbe6f9d559a2 [file] [log] [blame]
* Freescale MXS USB Phy Device
Required properties:
- compatible: should contain:
* "fsl,imx23-usbphy" for imx23 and imx28
* "fsl,imx6q-usbphy" for imx6dq and imx6dl
* "fsl,imx6sl-usbphy" for imx6sl
* "fsl,vf610-usbphy" for Vybrid vf610
* "fsl,imx6sx-usbphy" for imx6sx
* "fsl,imx6ul-usbphy" for imx6ul
"fsl,imx23-usbphy" is still a fallback for other strings
- reg: Should contain registers location and length
- interrupts: Should contain phy interrupt
- fsl,anatop: phandle for anatop register, it is only for imx6 SoC series
Optional properties:
- tx-d-cal: Try to adjust this value to improve signal quality, and pass
USB Certification, the value is from 0x0 to 0xf, and the register offset
is 0x10 (USBPHY_TX).
usbphy1: usbphy@020c9000 {
compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
interrupts = <0 44 0x04>;
fsl,anatop = <&anatop>;
tx-d-cal = <0x5>;