blob: 4fc869b69d4ac065da2b23c3f0ec2c90fec69c3a [file] [log] [blame]
* Samsung Audio Subsystem Clock Controller
The Samsung Audio Subsystem clock controller generates and supplies clocks
to Audio Subsystem block available in the S5PV210 and compatible SoCs.
Required Properties:
- compatible: should be "samsung,s5pv210-audss-clock".
- reg: physical base address and length of the controller's register set.
- #clock-cells: should be 1.
- clocks:
- hclk: AHB bus clock of the Audio Subsystem.
- xxti: Optional fixed rate PLL reference clock, parent of mout_audss. If
not specified (i.e. xusbxti is used for PLL reference), it is fixed to
a clock named "xxti".
- fout_epll: Input PLL to the AudioSS block, parent of mout_audss.
- iiscdclk0: Optional external i2s clock, parent of mout_i2s. If not
specified, it is fixed to a clock named "iiscdclk0".
- sclk_audio0: Audio bus clock, parent of mout_i2s.
- clock-names: Aliases for the above clocks. They should be "hclk",
"xxti", "fout_epll", "iiscdclk0", and "sclk_audio0" respectively.
All available clocks are defined as preprocessor macros in
dt-bindings/clock/s5pv210-audss-clk.h header and can be used in device
tree sources.
Example: Clock controller node.
clk_audss: clock-controller@c0900000 {
compatible = "samsung,s5pv210-audss-clock";
reg = <0xc0900000 0x1000>;
#clock-cells = <1>;
clock-names = "hclk", "xxti",
"fout_epll", "sclk_audio0";
clocks = <&clocks DOUT_HCLKP>, <&xxti>,
<&clocks FOUT_EPLL>, <&clocks SCLK_AUDIO0>;
Example: I2S controller node that consumes the clock generated by the clock
controller. Refer to the standard clock bindings for information
about 'clocks' and 'clock-names' property.
i2s0: i2s@03830000 {
/* ... */
clock-names = "iis", "i2s_opclk0",
clocks = <&clk_audss CLK_I2S>, <&clk_audss CLK_I2S>,
<&clk_audss CLK_DOUT_AUD_BUS>;
/* ... */