blob: 6247652044a0b0f528ba05da9954be7c4d24a99e [file] [log] [blame] [edit]
Binding for a ST divider and multiplexer clock driver.
This binding uses the common clock binding[1].
Base address is located to the parent node. See clock binding[2]
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
Required properties:
- compatible : shall be:
"st,clkgena-divmux-c65-hs", "st,clkgena-divmux"
"st,clkgena-divmux-c65-ls", "st,clkgena-divmux"
"st,clkgena-divmux-c32-odf0", "st,clkgena-divmux"
"st,clkgena-divmux-c32-odf1", "st,clkgena-divmux"
"st,clkgena-divmux-c32-odf2", "st,clkgena-divmux"
"st,clkgena-divmux-c32-odf3", "st,clkgena-divmux"
- #clock-cells : From common clock binding; shall be set to 1.
- clocks : From common clock binding
- clock-output-names : From common clock binding.
Example:
clockgen-a@fd345000 {
reg = <0xfd345000 0xb50>;
clk_m_a1_div1: clk-m-a1-div1 {
#clock-cells = <1>;
compatible = "st,clkgena-divmux-c32-odf1",
"st,clkgena-divmux";
clocks = <&clk_m_a1_osc_prediv>,
<&clk_m_a1_pll0 1>, /* PLL0 PHI1 */
<&clk_m_a1_pll1 1>; /* PLL1 PHI1 */
clock-output-names = "clk-m-rx-icn-ts",
"clk-m-rx-icn-vdp-0",
"", /* unused */
"clk-m-prv-t1-bus",
"clk-m-icn-reg-12",
"clk-m-icn-reg-10",
"", /* unused */
"clk-m-icn-st231";
};
};