blob: 1c4ef773feea1b7ee659d887f1f03287268db9b4 [file] [log] [blame]
Device Tree Clock bindings for APM X-Gene
This binding uses the common clock binding[1].
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
Required properties:
- compatible : shall be one of the following:
"apm,xgene-socpll-clock" - for a X-Gene SoC PLL clock
"apm,xgene-pcppll-clock" - for a X-Gene PCP PLL clock
"apm,xgene-device-clock" - for a X-Gene device clock
Required properties for SoC or PCP PLL clocks:
- reg : shall be the physical PLL register address for the pll clock.
- clocks : shall be the input parent clock phandle for the clock. This should
be the reference clock.
- #clock-cells : shall be set to 1.
- clock-output-names : shall be the name of the PLL referenced by derive
clock.
Optional properties for PLL clocks:
- clock-names : shall be the name of the PLL. If missing, use the device name.
Required properties for device clocks:
- reg : shall be a list of address and length pairs describing the CSR
reset and/or the divider. Either may be omitted, but at least
one must be present.
- reg-names : shall be a string list describing the reg resource. This
may include "csr-reg" and/or "div-reg". If this property
is not present, the reg property is assumed to describe
only "csr-reg".
- clocks : shall be the input parent clock phandle for the clock.
- #clock-cells : shall be set to 1.
- clock-output-names : shall be the name of the device referenced.
Optional properties for device clocks:
- clock-names : shall be the name of the device clock. If missing, use the
device name.
- csr-offset : Offset to the CSR reset register from the reset address base.
Default is 0.
- csr-mask : CSR reset mask bit. Default is 0xF.
- enable-offset : Offset to the enable register from the reset address base.
Default is 0x8.
- enable-mask : CSR enable mask bit. Default is 0xF.
- divider-offset : Offset to the divider CSR register from the divider base.
Default is 0x0.
- divider-width : Width of the divider register. Default is 0.
- divider-shift : Bit shift of the divider register. Default is 0.
For example:
pcppll: pcppll@17000100 {
compatible = "apm,xgene-pcppll-clock";
#clock-cells = <1>;
clocks = <&refclk 0>;
clock-names = "pcppll";
reg = <0x0 0x17000100 0x0 0x1000>;
clock-output-names = "pcppll";
type = <0>;
};
socpll: socpll@17000120 {
compatible = "apm,xgene-socpll-clock";
#clock-cells = <1>;
clocks = <&refclk 0>;
clock-names = "socpll";
reg = <0x0 0x17000120 0x0 0x1000>;
clock-output-names = "socpll";
type = <1>;
};
qmlclk: qmlclk {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
clocks = <&socplldiv2 0>;
clock-names = "qmlclk";
reg = <0x0 0x1703C000 0x0 0x1000>;
reg-name = "csr-reg";
clock-output-names = "qmlclk";
};
ethclk: ethclk {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
clocks = <&socplldiv2 0>;
clock-names = "ethclk";
reg = <0x0 0x17000000 0x0 0x1000>;
reg-names = "div-reg";
divider-offset = <0x238>;
divider-width = <0x9>;
divider-shift = <0x0>;
clock-output-names = "ethclk";
};
apbclk: apbclk {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
clocks = <&ahbclk 0>;
clock-names = "apbclk";
reg = <0x0 0x1F2AC000 0x0 0x1000
0x0 0x1F2AC000 0x0 0x1000>;
reg-names = "csr-reg", "div-reg";
csr-offset = <0x0>;
csr-mask = <0x200>;
enable-offset = <0x8>;
enable-mask = <0x200>;
divider-offset = <0x10>;
divider-width = <0x2>;
divider-shift = <0x0>;
flags = <0x8>;
clock-output-names = "apbclk";
};