blob: 7bd8847d6394e6bbfb7df8b43eea2af4375cc883 [file] [log] [blame]
* Freescale Direct Memory Access (DMA) Controller for i.MX
This document will only describe differences to the generic DMA Controller and
DMA request bindings as described in dma/dma.txt .
* DMA controller
Required properties:
- compatible : Should be "fsl,<chip>-dma". chip can be imx1, imx21 or imx27
- reg : Should contain DMA registers location and length
- interrupts : First item should be DMA interrupt, second one is optional and
should contain DMA Error interrupt
- #dma-cells : Has to be 1. imx-dma does not support anything else.
Optional properties:
- #dma-channels : Number of DMA channels supported. Should be 16.
- #dma-requests : Number of DMA requests supported.
dma: dma@10001000 {
compatible = "fsl,imx27-dma";
reg = <0x10001000 0x1000>;
interrupts = <32 33>;
#dma-cells = <1>;
#dma-channels = <16>;
* DMA client
Clients have to specify the DMA requests with phandles in a list.
Required properties:
- dmas: List of one or more DMA request specifiers. One DMA request specifier
consists of a phandle to the DMA controller followed by the integer
specifying the request line.
- dma-names: List of string identifiers for the DMA requests. For the correct
names, have a look at the specific client driver.
sdhci1: sdhci@10013000 {
dmas = <&dma 7>;
dma-names = "rx-tx";