| /* Copyright 2012 STEC, Inc. |
| * |
| * This file is licensed under the terms of the 3-clause |
| * BSD License (http://opensource.org/licenses/BSD-3-Clause) |
| * or the GNU GPL-2.0 (http://www.gnu.org/licenses/gpl-2.0.html), |
| * at your option. Both licenses are also available in the LICENSE file |
| * distributed with this project. This file may not be copied, modified, |
| * or distributed except in accordance with those terms. |
| * Gordoni Waidhofer <gwaidhofer@stec-inc.com> |
| * Initial Driver Design! |
| * Thomas Swann <tswann@stec-inc.com> |
| * Interrupt handling. |
| * Ramprasad Chinthekindi <rchinthekindi@stec-inc.com> |
| * biomode implementation. |
| * Akhil Bhansali <abhansali@stec-inc.com> |
| * Added support for DISCARD / FLUSH and FUA. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| #include <linux/blkdev.h> |
| #include <linux/sched.h> |
| #include <linux/interrupt.h> |
| #include <linux/compiler.h> |
| #include <linux/workqueue.h> |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| #include <linux/time.h> |
| #include <linux/hdreg.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/completion.h> |
| #include <linux/scatterlist.h> |
| #include <linux/version.h> |
| #include <linux/err.h> |
| #include <linux/scatterlist.h> |
| #include <linux/aer.h> |
| #include <linux/ctype.h> |
| #include <linux/wait.h> |
| #include <linux/uio.h> |
| #include <scsi/scsi.h> |
| #include <scsi/sg.h> |
| #include <linux/io.h> |
| #include <linux/uaccess.h> |
| #include <asm/unaligned.h> |
| |
| #include "skd_s1120.h" |
| |
| static int skd_dbg_level; |
| static int skd_isr_comp_limit = 4; |
| |
| enum { |
| STEC_LINK_2_5GTS = 0, |
| STEC_LINK_5GTS = 1, |
| STEC_LINK_8GTS = 2, |
| STEC_LINK_UNKNOWN = 0xFF |
| }; |
| |
| enum { |
| SKD_FLUSH_INITIALIZER, |
| SKD_FLUSH_ZERO_SIZE_FIRST, |
| SKD_FLUSH_DATA_SECOND, |
| }; |
| |
| #define SKD_ASSERT(expr) \ |
| do { \ |
| if (unlikely(!(expr))) { \ |
| pr_err("Assertion failed! %s,%s,%s,line=%d\n", \ |
| # expr, __FILE__, __func__, __LINE__); \ |
| } \ |
| } while (0) |
| |
| #define DRV_NAME "skd" |
| #define DRV_VERSION "2.2.1" |
| #define DRV_BUILD_ID "0260" |
| #define PFX DRV_NAME ": " |
| #define DRV_BIN_VERSION 0x100 |
| #define DRV_VER_COMPL "2.2.1." DRV_BUILD_ID |
| |
| MODULE_AUTHOR("bug-reports: support@stec-inc.com"); |
| MODULE_LICENSE("Dual BSD/GPL"); |
| |
| MODULE_DESCRIPTION("STEC s1120 PCIe SSD block driver (b" DRV_BUILD_ID ")"); |
| MODULE_VERSION(DRV_VERSION "-" DRV_BUILD_ID); |
| |
| #define PCI_VENDOR_ID_STEC 0x1B39 |
| #define PCI_DEVICE_ID_S1120 0x0001 |
| |
| #define SKD_FUA_NV (1 << 1) |
| #define SKD_MINORS_PER_DEVICE 16 |
| |
| #define SKD_MAX_QUEUE_DEPTH 200u |
| |
| #define SKD_PAUSE_TIMEOUT (5 * 1000) |
| |
| #define SKD_N_FITMSG_BYTES (512u) |
| |
| #define SKD_N_SPECIAL_CONTEXT 32u |
| #define SKD_N_SPECIAL_FITMSG_BYTES (128u) |
| |
| /* SG elements are 32 bytes, so we can make this 4096 and still be under the |
| * 128KB limit. That allows 4096*4K = 16M xfer size |
| */ |
| #define SKD_N_SG_PER_REQ_DEFAULT 256u |
| #define SKD_N_SG_PER_SPECIAL 256u |
| |
| #define SKD_N_COMPLETION_ENTRY 256u |
| #define SKD_N_READ_CAP_BYTES (8u) |
| |
| #define SKD_N_INTERNAL_BYTES (512u) |
| |
| /* 5 bits of uniqifier, 0xF800 */ |
| #define SKD_ID_INCR (0x400) |
| #define SKD_ID_TABLE_MASK (3u << 8u) |
| #define SKD_ID_RW_REQUEST (0u << 8u) |
| #define SKD_ID_INTERNAL (1u << 8u) |
| #define SKD_ID_SPECIAL_REQUEST (2u << 8u) |
| #define SKD_ID_FIT_MSG (3u << 8u) |
| #define SKD_ID_SLOT_MASK 0x00FFu |
| #define SKD_ID_SLOT_AND_TABLE_MASK 0x03FFu |
| |
| #define SKD_N_TIMEOUT_SLOT 4u |
| #define SKD_TIMEOUT_SLOT_MASK 3u |
| |
| #define SKD_N_MAX_SECTORS 2048u |
| |
| #define SKD_MAX_RETRIES 2u |
| |
| #define SKD_TIMER_SECONDS(seconds) (seconds) |
| #define SKD_TIMER_MINUTES(minutes) ((minutes) * (60)) |
| |
| #define INQ_STD_NBYTES 36 |
| #define SKD_DISCARD_CDB_LENGTH 24 |
| |
| enum skd_drvr_state { |
| SKD_DRVR_STATE_LOAD, |
| SKD_DRVR_STATE_IDLE, |
| SKD_DRVR_STATE_BUSY, |
| SKD_DRVR_STATE_STARTING, |
| SKD_DRVR_STATE_ONLINE, |
| SKD_DRVR_STATE_PAUSING, |
| SKD_DRVR_STATE_PAUSED, |
| SKD_DRVR_STATE_DRAINING_TIMEOUT, |
| SKD_DRVR_STATE_RESTARTING, |
| SKD_DRVR_STATE_RESUMING, |
| SKD_DRVR_STATE_STOPPING, |
| SKD_DRVR_STATE_FAULT, |
| SKD_DRVR_STATE_DISAPPEARED, |
| SKD_DRVR_STATE_PROTOCOL_MISMATCH, |
| SKD_DRVR_STATE_BUSY_ERASE, |
| SKD_DRVR_STATE_BUSY_SANITIZE, |
| SKD_DRVR_STATE_BUSY_IMMINENT, |
| SKD_DRVR_STATE_WAIT_BOOT, |
| SKD_DRVR_STATE_SYNCING, |
| }; |
| |
| #define SKD_WAIT_BOOT_TIMO SKD_TIMER_SECONDS(90u) |
| #define SKD_STARTING_TIMO SKD_TIMER_SECONDS(8u) |
| #define SKD_RESTARTING_TIMO SKD_TIMER_MINUTES(4u) |
| #define SKD_DRAINING_TIMO SKD_TIMER_SECONDS(6u) |
| #define SKD_BUSY_TIMO SKD_TIMER_MINUTES(20u) |
| #define SKD_STARTED_BUSY_TIMO SKD_TIMER_SECONDS(60u) |
| #define SKD_START_WAIT_SECONDS 90u |
| |
| enum skd_req_state { |
| SKD_REQ_STATE_IDLE, |
| SKD_REQ_STATE_SETUP, |
| SKD_REQ_STATE_BUSY, |
| SKD_REQ_STATE_COMPLETED, |
| SKD_REQ_STATE_TIMEOUT, |
| SKD_REQ_STATE_ABORTED, |
| }; |
| |
| enum skd_fit_msg_state { |
| SKD_MSG_STATE_IDLE, |
| SKD_MSG_STATE_BUSY, |
| }; |
| |
| enum skd_check_status_action { |
| SKD_CHECK_STATUS_REPORT_GOOD, |
| SKD_CHECK_STATUS_REPORT_SMART_ALERT, |
| SKD_CHECK_STATUS_REQUEUE_REQUEST, |
| SKD_CHECK_STATUS_REPORT_ERROR, |
| SKD_CHECK_STATUS_BUSY_IMMINENT, |
| }; |
| |
| struct skd_fitmsg_context { |
| enum skd_fit_msg_state state; |
| |
| struct skd_fitmsg_context *next; |
| |
| u32 id; |
| u16 outstanding; |
| |
| u32 length; |
| u32 offset; |
| |
| u8 *msg_buf; |
| dma_addr_t mb_dma_address; |
| }; |
| |
| struct skd_request_context { |
| enum skd_req_state state; |
| |
| struct skd_request_context *next; |
| |
| u16 id; |
| u32 fitmsg_id; |
| |
| struct request *req; |
| u8 flush_cmd; |
| u8 discard_page; |
| |
| u32 timeout_stamp; |
| u8 sg_data_dir; |
| struct scatterlist *sg; |
| u32 n_sg; |
| u32 sg_byte_count; |
| |
| struct fit_sg_descriptor *sksg_list; |
| dma_addr_t sksg_dma_address; |
| |
| struct fit_completion_entry_v1 completion; |
| |
| struct fit_comp_error_info err_info; |
| |
| }; |
| #define SKD_DATA_DIR_HOST_TO_CARD 1 |
| #define SKD_DATA_DIR_CARD_TO_HOST 2 |
| #define SKD_DATA_DIR_NONE 3 /* especially for DISCARD requests. */ |
| |
| struct skd_special_context { |
| struct skd_request_context req; |
| |
| u8 orphaned; |
| |
| void *data_buf; |
| dma_addr_t db_dma_address; |
| |
| u8 *msg_buf; |
| dma_addr_t mb_dma_address; |
| }; |
| |
| struct skd_sg_io { |
| fmode_t mode; |
| void __user *argp; |
| |
| struct sg_io_hdr sg; |
| |
| u8 cdb[16]; |
| |
| u32 dxfer_len; |
| u32 iovcnt; |
| struct sg_iovec *iov; |
| struct sg_iovec no_iov_iov; |
| |
| struct skd_special_context *skspcl; |
| }; |
| |
| typedef enum skd_irq_type { |
| SKD_IRQ_LEGACY, |
| SKD_IRQ_MSI, |
| SKD_IRQ_MSIX |
| } skd_irq_type_t; |
| |
| #define SKD_MAX_BARS 2 |
| |
| struct skd_device { |
| volatile void __iomem *mem_map[SKD_MAX_BARS]; |
| resource_size_t mem_phys[SKD_MAX_BARS]; |
| u32 mem_size[SKD_MAX_BARS]; |
| |
| skd_irq_type_t irq_type; |
| u32 msix_count; |
| struct skd_msix_entry *msix_entries; |
| |
| struct pci_dev *pdev; |
| int pcie_error_reporting_is_enabled; |
| |
| spinlock_t lock; |
| struct gendisk *disk; |
| struct request_queue *queue; |
| struct device *class_dev; |
| int gendisk_on; |
| int sync_done; |
| |
| atomic_t device_count; |
| u32 devno; |
| u32 major; |
| char name[32]; |
| char isr_name[30]; |
| |
| enum skd_drvr_state state; |
| u32 drive_state; |
| |
| u32 in_flight; |
| u32 cur_max_queue_depth; |
| u32 queue_low_water_mark; |
| u32 dev_max_queue_depth; |
| |
| u32 num_fitmsg_context; |
| u32 num_req_context; |
| |
| u32 timeout_slot[SKD_N_TIMEOUT_SLOT]; |
| u32 timeout_stamp; |
| struct skd_fitmsg_context *skmsg_free_list; |
| struct skd_fitmsg_context *skmsg_table; |
| |
| struct skd_request_context *skreq_free_list; |
| struct skd_request_context *skreq_table; |
| |
| struct skd_special_context *skspcl_free_list; |
| struct skd_special_context *skspcl_table; |
| |
| struct skd_special_context internal_skspcl; |
| u32 read_cap_blocksize; |
| u32 read_cap_last_lba; |
| int read_cap_is_valid; |
| int inquiry_is_valid; |
| u8 inq_serial_num[13]; /*12 chars plus null term */ |
| u8 id_str[80]; /* holds a composite name (pci + sernum) */ |
| |
| u8 skcomp_cycle; |
| u32 skcomp_ix; |
| struct fit_completion_entry_v1 *skcomp_table; |
| struct fit_comp_error_info *skerr_table; |
| dma_addr_t cq_dma_address; |
| |
| wait_queue_head_t waitq; |
| |
| struct timer_list timer; |
| u32 timer_countdown; |
| u32 timer_substate; |
| |
| int n_special; |
| int sgs_per_request; |
| u32 last_mtd; |
| |
| u32 proto_ver; |
| |
| int dbg_level; |
| u32 connect_time_stamp; |
| int connect_retries; |
| #define SKD_MAX_CONNECT_RETRIES 16 |
| u32 drive_jiffies; |
| |
| u32 timo_slot; |
| |
| |
| struct work_struct completion_worker; |
| }; |
| |
| #define SKD_WRITEL(DEV, VAL, OFF) skd_reg_write32(DEV, VAL, OFF) |
| #define SKD_READL(DEV, OFF) skd_reg_read32(DEV, OFF) |
| #define SKD_WRITEQ(DEV, VAL, OFF) skd_reg_write64(DEV, VAL, OFF) |
| |
| static inline u32 skd_reg_read32(struct skd_device *skdev, u32 offset) |
| { |
| u32 val; |
| |
| if (likely(skdev->dbg_level < 2)) |
| return readl(skdev->mem_map[1] + offset); |
| else { |
| barrier(); |
| val = readl(skdev->mem_map[1] + offset); |
| barrier(); |
| pr_debug("%s:%s:%d offset %x = %x\n", |
| skdev->name, __func__, __LINE__, offset, val); |
| return val; |
| } |
| |
| } |
| |
| static inline void skd_reg_write32(struct skd_device *skdev, u32 val, |
| u32 offset) |
| { |
| if (likely(skdev->dbg_level < 2)) { |
| writel(val, skdev->mem_map[1] + offset); |
| barrier(); |
| } else { |
| barrier(); |
| writel(val, skdev->mem_map[1] + offset); |
| barrier(); |
| pr_debug("%s:%s:%d offset %x = %x\n", |
| skdev->name, __func__, __LINE__, offset, val); |
| } |
| } |
| |
| static inline void skd_reg_write64(struct skd_device *skdev, u64 val, |
| u32 offset) |
| { |
| if (likely(skdev->dbg_level < 2)) { |
| writeq(val, skdev->mem_map[1] + offset); |
| barrier(); |
| } else { |
| barrier(); |
| writeq(val, skdev->mem_map[1] + offset); |
| barrier(); |
| pr_debug("%s:%s:%d offset %x = %016llx\n", |
| skdev->name, __func__, __LINE__, offset, val); |
| } |
| } |
| |
| |
| #define SKD_IRQ_DEFAULT SKD_IRQ_MSI |
| static int skd_isr_type = SKD_IRQ_DEFAULT; |
| |
| module_param(skd_isr_type, int, 0444); |
| MODULE_PARM_DESC(skd_isr_type, "Interrupt type capability." |
| " (0==legacy, 1==MSI, 2==MSI-X, default==1)"); |
| |
| #define SKD_MAX_REQ_PER_MSG_DEFAULT 1 |
| static int skd_max_req_per_msg = SKD_MAX_REQ_PER_MSG_DEFAULT; |
| |
| module_param(skd_max_req_per_msg, int, 0444); |
| MODULE_PARM_DESC(skd_max_req_per_msg, |
| "Maximum SCSI requests packed in a single message." |
| " (1-14, default==1)"); |
| |
| #define SKD_MAX_QUEUE_DEPTH_DEFAULT 64 |
| #define SKD_MAX_QUEUE_DEPTH_DEFAULT_STR "64" |
| static int skd_max_queue_depth = SKD_MAX_QUEUE_DEPTH_DEFAULT; |
| |
| module_param(skd_max_queue_depth, int, 0444); |
| MODULE_PARM_DESC(skd_max_queue_depth, |
| "Maximum SCSI requests issued to s1120." |
| " (1-200, default==" SKD_MAX_QUEUE_DEPTH_DEFAULT_STR ")"); |
| |
| static int skd_sgs_per_request = SKD_N_SG_PER_REQ_DEFAULT; |
| module_param(skd_sgs_per_request, int, 0444); |
| MODULE_PARM_DESC(skd_sgs_per_request, |
| "Maximum SG elements per block request." |
| " (1-4096, default==256)"); |
| |
| static int skd_max_pass_thru = SKD_N_SPECIAL_CONTEXT; |
| module_param(skd_max_pass_thru, int, 0444); |
| MODULE_PARM_DESC(skd_max_pass_thru, |
| "Maximum SCSI pass-thru at a time." " (1-50, default==32)"); |
| |
| module_param(skd_dbg_level, int, 0444); |
| MODULE_PARM_DESC(skd_dbg_level, "s1120 debug level (0,1,2)"); |
| |
| module_param(skd_isr_comp_limit, int, 0444); |
| MODULE_PARM_DESC(skd_isr_comp_limit, "s1120 isr comp limit (0=none) default=4"); |
| |
| /* Major device number dynamically assigned. */ |
| static u32 skd_major; |
| |
| static void skd_destruct(struct skd_device *skdev); |
| static const struct block_device_operations skd_blockdev_ops; |
| static void skd_send_fitmsg(struct skd_device *skdev, |
| struct skd_fitmsg_context *skmsg); |
| static void skd_send_special_fitmsg(struct skd_device *skdev, |
| struct skd_special_context *skspcl); |
| static void skd_request_fn(struct request_queue *rq); |
| static void skd_end_request(struct skd_device *skdev, |
| struct skd_request_context *skreq, int error); |
| static int skd_preop_sg_list(struct skd_device *skdev, |
| struct skd_request_context *skreq); |
| static void skd_postop_sg_list(struct skd_device *skdev, |
| struct skd_request_context *skreq); |
| |
| static void skd_restart_device(struct skd_device *skdev); |
| static int skd_quiesce_dev(struct skd_device *skdev); |
| static int skd_unquiesce_dev(struct skd_device *skdev); |
| static void skd_release_special(struct skd_device *skdev, |
| struct skd_special_context *skspcl); |
| static void skd_disable_interrupts(struct skd_device *skdev); |
| static void skd_isr_fwstate(struct skd_device *skdev); |
| static void skd_recover_requests(struct skd_device *skdev, int requeue); |
| static void skd_soft_reset(struct skd_device *skdev); |
| |
| static const char *skd_name(struct skd_device *skdev); |
| const char *skd_drive_state_to_str(int state); |
| const char *skd_skdev_state_to_str(enum skd_drvr_state state); |
| static void skd_log_skdev(struct skd_device *skdev, const char *event); |
| static void skd_log_skmsg(struct skd_device *skdev, |
| struct skd_fitmsg_context *skmsg, const char *event); |
| static void skd_log_skreq(struct skd_device *skdev, |
| struct skd_request_context *skreq, const char *event); |
| |
| /* |
| ***************************************************************************** |
| * READ/WRITE REQUESTS |
| ***************************************************************************** |
| */ |
| static void skd_fail_all_pending(struct skd_device *skdev) |
| { |
| struct request_queue *q = skdev->queue; |
| struct request *req; |
| |
| for (;; ) { |
| req = blk_peek_request(q); |
| if (req == NULL) |
| break; |
| blk_start_request(req); |
| __blk_end_request_all(req, -EIO); |
| } |
| } |
| |
| static void |
| skd_prep_rw_cdb(struct skd_scsi_request *scsi_req, |
| int data_dir, unsigned lba, |
| unsigned count) |
| { |
| if (data_dir == READ) |
| scsi_req->cdb[0] = 0x28; |
| else |
| scsi_req->cdb[0] = 0x2a; |
| |
| scsi_req->cdb[1] = 0; |
| scsi_req->cdb[2] = (lba & 0xff000000) >> 24; |
| scsi_req->cdb[3] = (lba & 0xff0000) >> 16; |
| scsi_req->cdb[4] = (lba & 0xff00) >> 8; |
| scsi_req->cdb[5] = (lba & 0xff); |
| scsi_req->cdb[6] = 0; |
| scsi_req->cdb[7] = (count & 0xff00) >> 8; |
| scsi_req->cdb[8] = count & 0xff; |
| scsi_req->cdb[9] = 0; |
| } |
| |
| static void |
| skd_prep_zerosize_flush_cdb(struct skd_scsi_request *scsi_req, |
| struct skd_request_context *skreq) |
| { |
| skreq->flush_cmd = 1; |
| |
| scsi_req->cdb[0] = 0x35; |
| scsi_req->cdb[1] = 0; |
| scsi_req->cdb[2] = 0; |
| scsi_req->cdb[3] = 0; |
| scsi_req->cdb[4] = 0; |
| scsi_req->cdb[5] = 0; |
| scsi_req->cdb[6] = 0; |
| scsi_req->cdb[7] = 0; |
| scsi_req->cdb[8] = 0; |
| scsi_req->cdb[9] = 0; |
| } |
| |
| static void |
| skd_prep_discard_cdb(struct skd_scsi_request *scsi_req, |
| struct skd_request_context *skreq, |
| struct page *page, |
| u32 lba, u32 count) |
| { |
| char *buf; |
| unsigned long len; |
| struct request *req; |
| |
| buf = page_address(page); |
| len = SKD_DISCARD_CDB_LENGTH; |
| |
| scsi_req->cdb[0] = UNMAP; |
| scsi_req->cdb[8] = len; |
| |
| put_unaligned_be16(6 + 16, &buf[0]); |
| put_unaligned_be16(16, &buf[2]); |
| put_unaligned_be64(lba, &buf[8]); |
| put_unaligned_be32(count, &buf[16]); |
| |
| req = skreq->req; |
| blk_add_request_payload(req, page, len); |
| } |
| |
| static void skd_request_fn_not_online(struct request_queue *q); |
| |
| static void skd_request_fn(struct request_queue *q) |
| { |
| struct skd_device *skdev = q->queuedata; |
| struct skd_fitmsg_context *skmsg = NULL; |
| struct fit_msg_hdr *fmh = NULL; |
| struct skd_request_context *skreq; |
| struct request *req = NULL; |
| struct skd_scsi_request *scsi_req; |
| struct page *page; |
| unsigned long io_flags; |
| int error; |
| u32 lba; |
| u32 count; |
| int data_dir; |
| u32 be_lba; |
| u32 be_count; |
| u64 be_dmaa; |
| u64 cmdctxt; |
| u32 timo_slot; |
| void *cmd_ptr; |
| int flush, fua; |
| |
| if (skdev->state != SKD_DRVR_STATE_ONLINE) { |
| skd_request_fn_not_online(q); |
| return; |
| } |
| |
| if (blk_queue_stopped(skdev->queue)) { |
| if (skdev->skmsg_free_list == NULL || |
| skdev->skreq_free_list == NULL || |
| skdev->in_flight >= skdev->queue_low_water_mark) |
| /* There is still some kind of shortage */ |
| return; |
| |
| queue_flag_clear(QUEUE_FLAG_STOPPED, skdev->queue); |
| } |
| |
| /* |
| * Stop conditions: |
| * - There are no more native requests |
| * - There are already the maximum number of requests in progress |
| * - There are no more skd_request_context entries |
| * - There are no more FIT msg buffers |
| */ |
| for (;; ) { |
| |
| flush = fua = 0; |
| |
| req = blk_peek_request(q); |
| |
| /* Are there any native requests to start? */ |
| if (req == NULL) |
| break; |
| |
| lba = (u32)blk_rq_pos(req); |
| count = blk_rq_sectors(req); |
| data_dir = rq_data_dir(req); |
| io_flags = req->cmd_flags; |
| |
| if (io_flags & REQ_FLUSH) |
| flush++; |
| |
| if (io_flags & REQ_FUA) |
| fua++; |
| |
| pr_debug("%s:%s:%d new req=%p lba=%u(0x%x) " |
| "count=%u(0x%x) dir=%d\n", |
| skdev->name, __func__, __LINE__, |
| req, lba, lba, count, count, data_dir); |
| |
| /* At this point we know there is a request */ |
| |
| /* Are too many requets already in progress? */ |
| if (skdev->in_flight >= skdev->cur_max_queue_depth) { |
| pr_debug("%s:%s:%d qdepth %d, limit %d\n", |
| skdev->name, __func__, __LINE__, |
| skdev->in_flight, skdev->cur_max_queue_depth); |
| break; |
| } |
| |
| /* Is a skd_request_context available? */ |
| skreq = skdev->skreq_free_list; |
| if (skreq == NULL) { |
| pr_debug("%s:%s:%d Out of req=%p\n", |
| skdev->name, __func__, __LINE__, q); |
| break; |
| } |
| SKD_ASSERT(skreq->state == SKD_REQ_STATE_IDLE); |
| SKD_ASSERT((skreq->id & SKD_ID_INCR) == 0); |
| |
| /* Now we check to see if we can get a fit msg */ |
| if (skmsg == NULL) { |
| if (skdev->skmsg_free_list == NULL) { |
| pr_debug("%s:%s:%d Out of msg\n", |
| skdev->name, __func__, __LINE__); |
| break; |
| } |
| } |
| |
| skreq->flush_cmd = 0; |
| skreq->n_sg = 0; |
| skreq->sg_byte_count = 0; |
| skreq->discard_page = 0; |
| |
| /* |
| * OK to now dequeue request from q. |
| * |
| * At this point we are comitted to either start or reject |
| * the native request. Note that skd_request_context is |
| * available but is still at the head of the free list. |
| */ |
| blk_start_request(req); |
| skreq->req = req; |
| skreq->fitmsg_id = 0; |
| |
| /* Either a FIT msg is in progress or we have to start one. */ |
| if (skmsg == NULL) { |
| /* Are there any FIT msg buffers available? */ |
| skmsg = skdev->skmsg_free_list; |
| if (skmsg == NULL) { |
| pr_debug("%s:%s:%d Out of msg skdev=%p\n", |
| skdev->name, __func__, __LINE__, |
| skdev); |
| break; |
| } |
| SKD_ASSERT(skmsg->state == SKD_MSG_STATE_IDLE); |
| SKD_ASSERT((skmsg->id & SKD_ID_INCR) == 0); |
| |
| skdev->skmsg_free_list = skmsg->next; |
| |
| skmsg->state = SKD_MSG_STATE_BUSY; |
| skmsg->id += SKD_ID_INCR; |
| |
| /* Initialize the FIT msg header */ |
| fmh = (struct fit_msg_hdr *)skmsg->msg_buf; |
| memset(fmh, 0, sizeof(*fmh)); |
| fmh->protocol_id = FIT_PROTOCOL_ID_SOFIT; |
| skmsg->length = sizeof(*fmh); |
| } |
| |
| skreq->fitmsg_id = skmsg->id; |
| |
| /* |
| * Note that a FIT msg may have just been started |
| * but contains no SoFIT requests yet. |
| */ |
| |
| /* |
| * Transcode the request, checking as we go. The outcome of |
| * the transcoding is represented by the error variable. |
| */ |
| cmd_ptr = &skmsg->msg_buf[skmsg->length]; |
| memset(cmd_ptr, 0, 32); |
| |
| be_lba = cpu_to_be32(lba); |
| be_count = cpu_to_be32(count); |
| be_dmaa = cpu_to_be64((u64)skreq->sksg_dma_address); |
| cmdctxt = skreq->id + SKD_ID_INCR; |
| |
| scsi_req = cmd_ptr; |
| scsi_req->hdr.tag = cmdctxt; |
| scsi_req->hdr.sg_list_dma_address = be_dmaa; |
| |
| if (data_dir == READ) |
| skreq->sg_data_dir = SKD_DATA_DIR_CARD_TO_HOST; |
| else |
| skreq->sg_data_dir = SKD_DATA_DIR_HOST_TO_CARD; |
| |
| if (io_flags & REQ_DISCARD) { |
| page = alloc_page(GFP_ATOMIC | __GFP_ZERO); |
| if (!page) { |
| pr_err("request_fn:Page allocation failed.\n"); |
| skd_end_request(skdev, skreq, -ENOMEM); |
| break; |
| } |
| skreq->discard_page = 1; |
| req->completion_data = page; |
| skd_prep_discard_cdb(scsi_req, skreq, page, lba, count); |
| |
| } else if (flush == SKD_FLUSH_ZERO_SIZE_FIRST) { |
| skd_prep_zerosize_flush_cdb(scsi_req, skreq); |
| SKD_ASSERT(skreq->flush_cmd == 1); |
| |
| } else { |
| skd_prep_rw_cdb(scsi_req, data_dir, lba, count); |
| } |
| |
| if (fua) |
| scsi_req->cdb[1] |= SKD_FUA_NV; |
| |
| if (!req->bio) |
| goto skip_sg; |
| |
| error = skd_preop_sg_list(skdev, skreq); |
| |
| if (error != 0) { |
| /* |
| * Complete the native request with error. |
| * Note that the request context is still at the |
| * head of the free list, and that the SoFIT request |
| * was encoded into the FIT msg buffer but the FIT |
| * msg length has not been updated. In short, the |
| * only resource that has been allocated but might |
| * not be used is that the FIT msg could be empty. |
| */ |
| pr_debug("%s:%s:%d error Out\n", |
| skdev->name, __func__, __LINE__); |
| skd_end_request(skdev, skreq, error); |
| continue; |
| } |
| |
| skip_sg: |
| scsi_req->hdr.sg_list_len_bytes = |
| cpu_to_be32(skreq->sg_byte_count); |
| |
| /* Complete resource allocations. */ |
| skdev->skreq_free_list = skreq->next; |
| skreq->state = SKD_REQ_STATE_BUSY; |
| skreq->id += SKD_ID_INCR; |
| |
| skmsg->length += sizeof(struct skd_scsi_request); |
| fmh->num_protocol_cmds_coalesced++; |
| |
| /* |
| * Update the active request counts. |
| * Capture the timeout timestamp. |
| */ |
| skreq->timeout_stamp = skdev->timeout_stamp; |
| timo_slot = skreq->timeout_stamp & SKD_TIMEOUT_SLOT_MASK; |
| skdev->timeout_slot[timo_slot]++; |
| skdev->in_flight++; |
| pr_debug("%s:%s:%d req=0x%x busy=%d\n", |
| skdev->name, __func__, __LINE__, |
| skreq->id, skdev->in_flight); |
| |
| /* |
| * If the FIT msg buffer is full send it. |
| */ |
| if (skmsg->length >= SKD_N_FITMSG_BYTES || |
| fmh->num_protocol_cmds_coalesced >= skd_max_req_per_msg) { |
| skd_send_fitmsg(skdev, skmsg); |
| skmsg = NULL; |
| fmh = NULL; |
| } |
| } |
| |
| /* |
| * Is a FIT msg in progress? If it is empty put the buffer back |
| * on the free list. If it is non-empty send what we got. |
| * This minimizes latency when there are fewer requests than |
| * what fits in a FIT msg. |
| */ |
| if (skmsg != NULL) { |
| /* Bigger than just a FIT msg header? */ |
| if (skmsg->length > sizeof(struct fit_msg_hdr)) { |
| pr_debug("%s:%s:%d sending msg=%p, len %d\n", |
| skdev->name, __func__, __LINE__, |
| skmsg, skmsg->length); |
| skd_send_fitmsg(skdev, skmsg); |
| } else { |
| /* |
| * The FIT msg is empty. It means we got started |
| * on the msg, but the requests were rejected. |
| */ |
| skmsg->state = SKD_MSG_STATE_IDLE; |
| skmsg->id += SKD_ID_INCR; |
| skmsg->next = skdev->skmsg_free_list; |
| skdev->skmsg_free_list = skmsg; |
| } |
| skmsg = NULL; |
| fmh = NULL; |
| } |
| |
| /* |
| * If req is non-NULL it means there is something to do but |
| * we are out of a resource. |
| */ |
| if (req) |
| blk_stop_queue(skdev->queue); |
| } |
| |
| static void skd_end_request(struct skd_device *skdev, |
| struct skd_request_context *skreq, int error) |
| { |
| struct request *req = skreq->req; |
| unsigned int io_flags = req->cmd_flags; |
| |
| if ((io_flags & REQ_DISCARD) && |
| (skreq->discard_page == 1)) { |
| pr_debug("%s:%s:%d, free the page!", |
| skdev->name, __func__, __LINE__); |
| __free_page(req->completion_data); |
| } |
| |
| if (unlikely(error)) { |
| struct request *req = skreq->req; |
| char *cmd = (rq_data_dir(req) == READ) ? "read" : "write"; |
| u32 lba = (u32)blk_rq_pos(req); |
| u32 count = blk_rq_sectors(req); |
| |
| pr_err("(%s): Error cmd=%s sect=%u count=%u id=0x%x\n", |
| skd_name(skdev), cmd, lba, count, skreq->id); |
| } else |
| pr_debug("%s:%s:%d id=0x%x error=%d\n", |
| skdev->name, __func__, __LINE__, skreq->id, error); |
| |
| __blk_end_request_all(skreq->req, error); |
| } |
| |
| static int skd_preop_sg_list(struct skd_device *skdev, |
| struct skd_request_context *skreq) |
| { |
| struct request *req = skreq->req; |
| int writing = skreq->sg_data_dir == SKD_DATA_DIR_HOST_TO_CARD; |
| int pci_dir = writing ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE; |
| struct scatterlist *sg = &skreq->sg[0]; |
| int n_sg; |
| int i; |
| |
| skreq->sg_byte_count = 0; |
| |
| /* SKD_ASSERT(skreq->sg_data_dir == SKD_DATA_DIR_HOST_TO_CARD || |
| skreq->sg_data_dir == SKD_DATA_DIR_CARD_TO_HOST); */ |
| |
| n_sg = blk_rq_map_sg(skdev->queue, req, sg); |
| if (n_sg <= 0) |
| return -EINVAL; |
| |
| /* |
| * Map scatterlist to PCI bus addresses. |
| * Note PCI might change the number of entries. |
| */ |
| n_sg = pci_map_sg(skdev->pdev, sg, n_sg, pci_dir); |
| if (n_sg <= 0) |
| return -EINVAL; |
| |
| SKD_ASSERT(n_sg <= skdev->sgs_per_request); |
| |
| skreq->n_sg = n_sg; |
| |
| for (i = 0; i < n_sg; i++) { |
| struct fit_sg_descriptor *sgd = &skreq->sksg_list[i]; |
| u32 cnt = sg_dma_len(&sg[i]); |
| uint64_t dma_addr = sg_dma_address(&sg[i]); |
| |
| sgd->control = FIT_SGD_CONTROL_NOT_LAST; |
| sgd->byte_count = cnt; |
| skreq->sg_byte_count += cnt; |
| sgd->host_side_addr = dma_addr; |
| sgd->dev_side_addr = 0; |
| } |
| |
| skreq->sksg_list[n_sg - 1].next_desc_ptr = 0LL; |
| skreq->sksg_list[n_sg - 1].control = FIT_SGD_CONTROL_LAST; |
| |
| if (unlikely(skdev->dbg_level > 1)) { |
| pr_debug("%s:%s:%d skreq=%x sksg_list=%p sksg_dma=%llx\n", |
| skdev->name, __func__, __LINE__, |
| skreq->id, skreq->sksg_list, skreq->sksg_dma_address); |
| for (i = 0; i < n_sg; i++) { |
| struct fit_sg_descriptor *sgd = &skreq->sksg_list[i]; |
| pr_debug("%s:%s:%d sg[%d] count=%u ctrl=0x%x " |
| "addr=0x%llx next=0x%llx\n", |
| skdev->name, __func__, __LINE__, |
| i, sgd->byte_count, sgd->control, |
| sgd->host_side_addr, sgd->next_desc_ptr); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void skd_postop_sg_list(struct skd_device *skdev, |
| struct skd_request_context *skreq) |
| { |
| int writing = skreq->sg_data_dir == SKD_DATA_DIR_HOST_TO_CARD; |
| int pci_dir = writing ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE; |
| |
| /* |
| * restore the next ptr for next IO request so we |
| * don't have to set it every time. |
| */ |
| skreq->sksg_list[skreq->n_sg - 1].next_desc_ptr = |
| skreq->sksg_dma_address + |
| ((skreq->n_sg) * sizeof(struct fit_sg_descriptor)); |
| pci_unmap_sg(skdev->pdev, &skreq->sg[0], skreq->n_sg, pci_dir); |
| } |
| |
| static void skd_request_fn_not_online(struct request_queue *q) |
| { |
| struct skd_device *skdev = q->queuedata; |
| int error; |
| |
| SKD_ASSERT(skdev->state != SKD_DRVR_STATE_ONLINE); |
| |
| skd_log_skdev(skdev, "req_not_online"); |
| switch (skdev->state) { |
| case SKD_DRVR_STATE_PAUSING: |
| case SKD_DRVR_STATE_PAUSED: |
| case SKD_DRVR_STATE_STARTING: |
| case SKD_DRVR_STATE_RESTARTING: |
| case SKD_DRVR_STATE_WAIT_BOOT: |
| /* In case of starting, we haven't started the queue, |
| * so we can't get here... but requests are |
| * possibly hanging out waiting for us because we |
| * reported the dev/skd0 already. They'll wait |
| * forever if connect doesn't complete. |
| * What to do??? delay dev/skd0 ?? |
| */ |
| case SKD_DRVR_STATE_BUSY: |
| case SKD_DRVR_STATE_BUSY_IMMINENT: |
| case SKD_DRVR_STATE_BUSY_ERASE: |
| case SKD_DRVR_STATE_DRAINING_TIMEOUT: |
| return; |
| |
| case SKD_DRVR_STATE_BUSY_SANITIZE: |
| case SKD_DRVR_STATE_STOPPING: |
| case SKD_DRVR_STATE_SYNCING: |
| case SKD_DRVR_STATE_FAULT: |
| case SKD_DRVR_STATE_DISAPPEARED: |
| default: |
| error = -EIO; |
| break; |
| } |
| |
| /* If we get here, terminate all pending block requeusts |
| * with EIO and any scsi pass thru with appropriate sense |
| */ |
| |
| skd_fail_all_pending(skdev); |
| } |
| |
| /* |
| ***************************************************************************** |
| * TIMER |
| ***************************************************************************** |
| */ |
| |
| static void skd_timer_tick_not_online(struct skd_device *skdev); |
| |
| static void skd_timer_tick(ulong arg) |
| { |
| struct skd_device *skdev = (struct skd_device *)arg; |
| |
| u32 timo_slot; |
| u32 overdue_timestamp; |
| unsigned long reqflags; |
| u32 state; |
| |
| if (skdev->state == SKD_DRVR_STATE_FAULT) |
| /* The driver has declared fault, and we want it to |
| * stay that way until driver is reloaded. |
| */ |
| return; |
| |
| spin_lock_irqsave(&skdev->lock, reqflags); |
| |
| state = SKD_READL(skdev, FIT_STATUS); |
| state &= FIT_SR_DRIVE_STATE_MASK; |
| if (state != skdev->drive_state) |
| skd_isr_fwstate(skdev); |
| |
| if (skdev->state != SKD_DRVR_STATE_ONLINE) { |
| skd_timer_tick_not_online(skdev); |
| goto timer_func_out; |
| } |
| skdev->timeout_stamp++; |
| timo_slot = skdev->timeout_stamp & SKD_TIMEOUT_SLOT_MASK; |
| |
| /* |
| * All requests that happened during the previous use of |
| * this slot should be done by now. The previous use was |
| * over 7 seconds ago. |
| */ |
| if (skdev->timeout_slot[timo_slot] == 0) |
| goto timer_func_out; |
| |
| /* Something is overdue */ |
| overdue_timestamp = skdev->timeout_stamp - SKD_N_TIMEOUT_SLOT; |
| |
| pr_debug("%s:%s:%d found %d timeouts, draining busy=%d\n", |
| skdev->name, __func__, __LINE__, |
| skdev->timeout_slot[timo_slot], skdev->in_flight); |
| pr_err("(%s): Overdue IOs (%d), busy %d\n", |
| skd_name(skdev), skdev->timeout_slot[timo_slot], |
| skdev->in_flight); |
| |
| skdev->timer_countdown = SKD_DRAINING_TIMO; |
| skdev->state = SKD_DRVR_STATE_DRAINING_TIMEOUT; |
| skdev->timo_slot = timo_slot; |
| blk_stop_queue(skdev->queue); |
| |
| timer_func_out: |
| mod_timer(&skdev->timer, (jiffies + HZ)); |
| |
| spin_unlock_irqrestore(&skdev->lock, reqflags); |
| } |
| |
| static void skd_timer_tick_not_online(struct skd_device *skdev) |
| { |
| switch (skdev->state) { |
| case SKD_DRVR_STATE_IDLE: |
| case SKD_DRVR_STATE_LOAD: |
| break; |
| case SKD_DRVR_STATE_BUSY_SANITIZE: |
| pr_debug("%s:%s:%d drive busy sanitize[%x], driver[%x]\n", |
| skdev->name, __func__, __LINE__, |
| skdev->drive_state, skdev->state); |
| /* If we've been in sanitize for 3 seconds, we figure we're not |
| * going to get anymore completions, so recover requests now |
| */ |
| if (skdev->timer_countdown > 0) { |
| skdev->timer_countdown--; |
| return; |
| } |
| skd_recover_requests(skdev, 0); |
| break; |
| |
| case SKD_DRVR_STATE_BUSY: |
| case SKD_DRVR_STATE_BUSY_IMMINENT: |
| case SKD_DRVR_STATE_BUSY_ERASE: |
| pr_debug("%s:%s:%d busy[%x], countdown=%d\n", |
| skdev->name, __func__, __LINE__, |
| skdev->state, skdev->timer_countdown); |
| if (skdev->timer_countdown > 0) { |
| skdev->timer_countdown--; |
| return; |
| } |
| pr_debug("%s:%s:%d busy[%x], timedout=%d, restarting device.", |
| skdev->name, __func__, __LINE__, |
| skdev->state, skdev->timer_countdown); |
| skd_restart_device(skdev); |
| break; |
| |
| case SKD_DRVR_STATE_WAIT_BOOT: |
| case SKD_DRVR_STATE_STARTING: |
| if (skdev->timer_countdown > 0) { |
| skdev->timer_countdown--; |
| return; |
| } |
| /* For now, we fault the drive. Could attempt resets to |
| * revcover at some point. */ |
| skdev->state = SKD_DRVR_STATE_FAULT; |
| |
| pr_err("(%s): DriveFault Connect Timeout (%x)\n", |
| skd_name(skdev), skdev->drive_state); |
| |
| /*start the queue so we can respond with error to requests */ |
| /* wakeup anyone waiting for startup complete */ |
| blk_start_queue(skdev->queue); |
| skdev->gendisk_on = -1; |
| wake_up_interruptible(&skdev->waitq); |
| break; |
| |
| case SKD_DRVR_STATE_ONLINE: |
| /* shouldn't get here. */ |
| break; |
| |
| case SKD_DRVR_STATE_PAUSING: |
| case SKD_DRVR_STATE_PAUSED: |
| break; |
| |
| case SKD_DRVR_STATE_DRAINING_TIMEOUT: |
| pr_debug("%s:%s:%d " |
| "draining busy [%d] tick[%d] qdb[%d] tmls[%d]\n", |
| skdev->name, __func__, __LINE__, |
| skdev->timo_slot, |
| skdev->timer_countdown, |
| skdev->in_flight, |
| skdev->timeout_slot[skdev->timo_slot]); |
| /* if the slot has cleared we can let the I/O continue */ |
| if (skdev->timeout_slot[skdev->timo_slot] == 0) { |
| pr_debug("%s:%s:%d Slot drained, starting queue.\n", |
| skdev->name, __func__, __LINE__); |
| skdev->state = SKD_DRVR_STATE_ONLINE; |
| blk_start_queue(skdev->queue); |
| return; |
| } |
| if (skdev->timer_countdown > 0) { |
| skdev->timer_countdown--; |
| return; |
| } |
| skd_restart_device(skdev); |
| break; |
| |
| case SKD_DRVR_STATE_RESTARTING: |
| if (skdev->timer_countdown > 0) { |
| skdev->timer_countdown--; |
| return; |
| } |
| /* For now, we fault the drive. Could attempt resets to |
| * revcover at some point. */ |
| skdev->state = SKD_DRVR_STATE_FAULT; |
| pr_err("(%s): DriveFault Reconnect Timeout (%x)\n", |
| skd_name(skdev), skdev->drive_state); |
| |
| /* |
| * Recovering does two things: |
| * 1. completes IO with error |
| * 2. reclaims dma resources |
| * When is it safe to recover requests? |
| * - if the drive state is faulted |
| * - if the state is still soft reset after out timeout |
| * - if the drive registers are dead (state = FF) |
| * If it is "unsafe", we still need to recover, so we will |
| * disable pci bus mastering and disable our interrupts. |
| */ |
| |
| if ((skdev->drive_state == FIT_SR_DRIVE_SOFT_RESET) || |
| (skdev->drive_state == FIT_SR_DRIVE_FAULT) || |
| (skdev->drive_state == FIT_SR_DRIVE_STATE_MASK)) |
| /* It never came out of soft reset. Try to |
| * recover the requests and then let them |
| * fail. This is to mitigate hung processes. */ |
| skd_recover_requests(skdev, 0); |
| else { |
| pr_err("(%s): Disable BusMaster (%x)\n", |
| skd_name(skdev), skdev->drive_state); |
| pci_disable_device(skdev->pdev); |
| skd_disable_interrupts(skdev); |
| skd_recover_requests(skdev, 0); |
| } |
| |
| /*start the queue so we can respond with error to requests */ |
| /* wakeup anyone waiting for startup complete */ |
| blk_start_queue(skdev->queue); |
| skdev->gendisk_on = -1; |
| wake_up_interruptible(&skdev->waitq); |
| break; |
| |
| case SKD_DRVR_STATE_RESUMING: |
| case SKD_DRVR_STATE_STOPPING: |
| case SKD_DRVR_STATE_SYNCING: |
| case SKD_DRVR_STATE_FAULT: |
| case SKD_DRVR_STATE_DISAPPEARED: |
| default: |
| break; |
| } |
| } |
| |
| static int skd_start_timer(struct skd_device *skdev) |
| { |
| int rc; |
| |
| init_timer(&skdev->timer); |
| setup_timer(&skdev->timer, skd_timer_tick, (ulong)skdev); |
| |
| rc = mod_timer(&skdev->timer, (jiffies + HZ)); |
| if (rc) |
| pr_err("%s: failed to start timer %d\n", |
| __func__, rc); |
| return rc; |
| } |
| |
| static void skd_kill_timer(struct skd_device *skdev) |
| { |
| del_timer_sync(&skdev->timer); |
| } |
| |
| /* |
| ***************************************************************************** |
| * IOCTL |
| ***************************************************************************** |
| */ |
| static int skd_ioctl_sg_io(struct skd_device *skdev, |
| fmode_t mode, void __user *argp); |
| static int skd_sg_io_get_and_check_args(struct skd_device *skdev, |
| struct skd_sg_io *sksgio); |
| static int skd_sg_io_obtain_skspcl(struct skd_device *skdev, |
| struct skd_sg_io *sksgio); |
| static int skd_sg_io_prep_buffering(struct skd_device *skdev, |
| struct skd_sg_io *sksgio); |
| static int skd_sg_io_copy_buffer(struct skd_device *skdev, |
| struct skd_sg_io *sksgio, int dxfer_dir); |
| static int skd_sg_io_send_fitmsg(struct skd_device *skdev, |
| struct skd_sg_io *sksgio); |
| static int skd_sg_io_await(struct skd_device *skdev, struct skd_sg_io *sksgio); |
| static int skd_sg_io_release_skspcl(struct skd_device *skdev, |
| struct skd_sg_io *sksgio); |
| static int skd_sg_io_put_status(struct skd_device *skdev, |
| struct skd_sg_io *sksgio); |
| |
| static void skd_complete_special(struct skd_device *skdev, |
| volatile struct fit_completion_entry_v1 |
| *skcomp, |
| volatile struct fit_comp_error_info *skerr, |
| struct skd_special_context *skspcl); |
| |
| static int skd_bdev_ioctl(struct block_device *bdev, fmode_t mode, |
| uint cmd_in, ulong arg) |
| { |
| int rc = 0; |
| struct gendisk *disk = bdev->bd_disk; |
| struct skd_device *skdev = disk->private_data; |
| void __user *p = (void *)arg; |
| |
| pr_debug("%s:%s:%d %s: CMD[%s] ioctl mode 0x%x, cmd 0x%x arg %0lx\n", |
| skdev->name, __func__, __LINE__, |
| disk->disk_name, current->comm, mode, cmd_in, arg); |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| |
| switch (cmd_in) { |
| case SG_SET_TIMEOUT: |
| case SG_GET_TIMEOUT: |
| case SG_GET_VERSION_NUM: |
| rc = scsi_cmd_ioctl(disk->queue, disk, mode, cmd_in, p); |
| break; |
| case SG_IO: |
| rc = skd_ioctl_sg_io(skdev, mode, p); |
| break; |
| |
| default: |
| rc = -ENOTTY; |
| break; |
| } |
| |
| pr_debug("%s:%s:%d %s: completion rc %d\n", |
| skdev->name, __func__, __LINE__, disk->disk_name, rc); |
| return rc; |
| } |
| |
| static int skd_ioctl_sg_io(struct skd_device *skdev, fmode_t mode, |
| void __user *argp) |
| { |
| int rc; |
| struct skd_sg_io sksgio; |
| |
| memset(&sksgio, 0, sizeof(sksgio)); |
| sksgio.mode = mode; |
| sksgio.argp = argp; |
| sksgio.iov = &sksgio.no_iov_iov; |
| |
| switch (skdev->state) { |
| case SKD_DRVR_STATE_ONLINE: |
| case SKD_DRVR_STATE_BUSY_IMMINENT: |
| break; |
| |
| default: |
| pr_debug("%s:%s:%d drive not online\n", |
| skdev->name, __func__, __LINE__); |
| rc = -ENXIO; |
| goto out; |
| } |
| |
| rc = skd_sg_io_get_and_check_args(skdev, &sksgio); |
| if (rc) |
| goto out; |
| |
| rc = skd_sg_io_obtain_skspcl(skdev, &sksgio); |
| if (rc) |
| goto out; |
| |
| rc = skd_sg_io_prep_buffering(skdev, &sksgio); |
| if (rc) |
| goto out; |
| |
| rc = skd_sg_io_copy_buffer(skdev, &sksgio, SG_DXFER_TO_DEV); |
| if (rc) |
| goto out; |
| |
| rc = skd_sg_io_send_fitmsg(skdev, &sksgio); |
| if (rc) |
| goto out; |
| |
| rc = skd_sg_io_await(skdev, &sksgio); |
| if (rc) |
| goto out; |
| |
| rc = skd_sg_io_copy_buffer(skdev, &sksgio, SG_DXFER_FROM_DEV); |
| if (rc) |
| goto out; |
| |
| rc = skd_sg_io_put_status(skdev, &sksgio); |
| if (rc) |
| goto out; |
| |
| rc = 0; |
| |
| out: |
| skd_sg_io_release_skspcl(skdev, &sksgio); |
| |
| if (sksgio.iov != NULL && sksgio.iov != &sksgio.no_iov_iov) |
| kfree(sksgio.iov); |
| return rc; |
| } |
| |
| static int skd_sg_io_get_and_check_args(struct skd_device *skdev, |
| struct skd_sg_io *sksgio) |
| { |
| struct sg_io_hdr *sgp = &sksgio->sg; |
| int i, acc; |
| |
| if (!access_ok(VERIFY_WRITE, sksgio->argp, sizeof(sg_io_hdr_t))) { |
| pr_debug("%s:%s:%d access sg failed %p\n", |
| skdev->name, __func__, __LINE__, sksgio->argp); |
| return -EFAULT; |
| } |
| |
| if (__copy_from_user(sgp, sksgio->argp, sizeof(sg_io_hdr_t))) { |
| pr_debug("%s:%s:%d copy_from_user sg failed %p\n", |
| skdev->name, __func__, __LINE__, sksgio->argp); |
| return -EFAULT; |
| } |
| |
| if (sgp->interface_id != SG_INTERFACE_ID_ORIG) { |
| pr_debug("%s:%s:%d interface_id invalid 0x%x\n", |
| skdev->name, __func__, __LINE__, sgp->interface_id); |
| return -EINVAL; |
| } |
| |
| if (sgp->cmd_len > sizeof(sksgio->cdb)) { |
| pr_debug("%s:%s:%d cmd_len invalid %d\n", |
| skdev->name, __func__, __LINE__, sgp->cmd_len); |
| return -EINVAL; |
| } |
| |
| if (sgp->iovec_count > 256) { |
| pr_debug("%s:%s:%d iovec_count invalid %d\n", |
| skdev->name, __func__, __LINE__, sgp->iovec_count); |
| return -EINVAL; |
| } |
| |
| if (sgp->dxfer_len > (PAGE_SIZE * SKD_N_SG_PER_SPECIAL)) { |
| pr_debug("%s:%s:%d dxfer_len invalid %d\n", |
| skdev->name, __func__, __LINE__, sgp->dxfer_len); |
| return -EINVAL; |
| } |
| |
| switch (sgp->dxfer_direction) { |
| case SG_DXFER_NONE: |
| acc = -1; |
| break; |
| |
| case SG_DXFER_TO_DEV: |
| acc = VERIFY_READ; |
| break; |
| |
| case SG_DXFER_FROM_DEV: |
| case SG_DXFER_TO_FROM_DEV: |
| acc = VERIFY_WRITE; |
| break; |
| |
| default: |
| pr_debug("%s:%s:%d dxfer_dir invalid %d\n", |
| skdev->name, __func__, __LINE__, sgp->dxfer_direction); |
| return -EINVAL; |
| } |
| |
| if (copy_from_user(sksgio->cdb, sgp->cmdp, sgp->cmd_len)) { |
| pr_debug("%s:%s:%d copy_from_user cmdp failed %p\n", |
| skdev->name, __func__, __LINE__, sgp->cmdp); |
| return -EFAULT; |
| } |
| |
| if (sgp->mx_sb_len != 0) { |
| if (!access_ok(VERIFY_WRITE, sgp->sbp, sgp->mx_sb_len)) { |
| pr_debug("%s:%s:%d access sbp failed %p\n", |
| skdev->name, __func__, __LINE__, sgp->sbp); |
| return -EFAULT; |
| } |
| } |
| |
| if (sgp->iovec_count == 0) { |
| sksgio->iov[0].iov_base = sgp->dxferp; |
| sksgio->iov[0].iov_len = sgp->dxfer_len; |
| sksgio->iovcnt = 1; |
| sksgio->dxfer_len = sgp->dxfer_len; |
| } else { |
| struct sg_iovec *iov; |
| uint nbytes = sizeof(*iov) * sgp->iovec_count; |
| size_t iov_data_len; |
| |
| iov = kmalloc(nbytes, GFP_KERNEL); |
| if (iov == NULL) { |
| pr_debug("%s:%s:%d alloc iovec failed %d\n", |
| skdev->name, __func__, __LINE__, |
| sgp->iovec_count); |
| return -ENOMEM; |
| } |
| sksgio->iov = iov; |
| sksgio->iovcnt = sgp->iovec_count; |
| |
| if (copy_from_user(iov, sgp->dxferp, nbytes)) { |
| pr_debug("%s:%s:%d copy_from_user iovec failed %p\n", |
| skdev->name, __func__, __LINE__, sgp->dxferp); |
| return -EFAULT; |
| } |
| |
| /* |
| * Sum up the vecs, making sure they don't overflow |
| */ |
| iov_data_len = 0; |
| for (i = 0; i < sgp->iovec_count; i++) { |
| if (iov_data_len + iov[i].iov_len < iov_data_len) |
| return -EINVAL; |
| iov_data_len += iov[i].iov_len; |
| } |
| |
| /* SG_IO howto says that the shorter of the two wins */ |
| if (sgp->dxfer_len < iov_data_len) { |
| sksgio->iovcnt = iov_shorten((struct iovec *)iov, |
| sgp->iovec_count, |
| sgp->dxfer_len); |
| sksgio->dxfer_len = sgp->dxfer_len; |
| } else |
| sksgio->dxfer_len = iov_data_len; |
| } |
| |
| if (sgp->dxfer_direction != SG_DXFER_NONE) { |
| struct sg_iovec *iov = sksgio->iov; |
| for (i = 0; i < sksgio->iovcnt; i++, iov++) { |
| if (!access_ok(acc, iov->iov_base, iov->iov_len)) { |
| pr_debug("%s:%s:%d access data failed %p/%d\n", |
| skdev->name, __func__, __LINE__, |
| iov->iov_base, (int)iov->iov_len); |
| return -EFAULT; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int skd_sg_io_obtain_skspcl(struct skd_device *skdev, |
| struct skd_sg_io *sksgio) |
| { |
| struct skd_special_context *skspcl = NULL; |
| int rc; |
| |
| for (;;) { |
| ulong flags; |
| |
| spin_lock_irqsave(&skdev->lock, flags); |
| skspcl = skdev->skspcl_free_list; |
| if (skspcl != NULL) { |
| skdev->skspcl_free_list = |
| (struct skd_special_context *)skspcl->req.next; |
| skspcl->req.id += SKD_ID_INCR; |
| skspcl->req.state = SKD_REQ_STATE_SETUP; |
| skspcl->orphaned = 0; |
| skspcl->req.n_sg = 0; |
| } |
| spin_unlock_irqrestore(&skdev->lock, flags); |
| |
| if (skspcl != NULL) { |
| rc = 0; |
| break; |
| } |
| |
| pr_debug("%s:%s:%d blocking\n", |
| skdev->name, __func__, __LINE__); |
| |
| rc = wait_event_interruptible_timeout( |
| skdev->waitq, |
| (skdev->skspcl_free_list != NULL), |
| msecs_to_jiffies(sksgio->sg.timeout)); |
| |
| pr_debug("%s:%s:%d unblocking, rc=%d\n", |
| skdev->name, __func__, __LINE__, rc); |
| |
| if (rc <= 0) { |
| if (rc == 0) |
| rc = -ETIMEDOUT; |
| else |
| rc = -EINTR; |
| break; |
| } |
| /* |
| * If we get here rc > 0 meaning the timeout to |
| * wait_event_interruptible_timeout() had time left, hence the |
| * sought event -- non-empty free list -- happened. |
| * Retry the allocation. |
| */ |
| } |
| sksgio->skspcl = skspcl; |
| |
| return rc; |
| } |
| |
| static int skd_skreq_prep_buffering(struct skd_device *skdev, |
| struct skd_request_context *skreq, |
| u32 dxfer_len) |
| { |
| u32 resid = dxfer_len; |
| |
| /* |
| * The DMA engine must have aligned addresses and byte counts. |
| */ |
| resid += (-resid) & 3; |
| skreq->sg_byte_count = resid; |
| |
| skreq->n_sg = 0; |
| |
| while (resid > 0) { |
| u32 nbytes = PAGE_SIZE; |
| u32 ix = skreq->n_sg; |
| struct scatterlist *sg = &skreq->sg[ix]; |
| struct fit_sg_descriptor *sksg = &skreq->sksg_list[ix]; |
| struct page *page; |
| |
| if (nbytes > resid) |
| nbytes = resid; |
| |
| page = alloc_page(GFP_KERNEL); |
| if (page == NULL) |
| return -ENOMEM; |
| |
| sg_set_page(sg, page, nbytes, 0); |
| |
| /* TODO: This should be going through a pci_???() |
| * routine to do proper mapping. */ |
| sksg->control = FIT_SGD_CONTROL_NOT_LAST; |
| sksg->byte_count = nbytes; |
| |
| sksg->host_side_addr = sg_phys(sg); |
| |
| sksg->dev_side_addr = 0; |
| sksg->next_desc_ptr = skreq->sksg_dma_address + |
| (ix + 1) * sizeof(*sksg); |
| |
| skreq->n_sg++; |
| resid -= nbytes; |
| } |
| |
| if (skreq->n_sg > 0) { |
| u32 ix = skreq->n_sg - 1; |
| struct fit_sg_descriptor *sksg = &skreq->sksg_list[ix]; |
| |
| sksg->control = FIT_SGD_CONTROL_LAST; |
| sksg->next_desc_ptr = 0; |
| } |
| |
| if (unlikely(skdev->dbg_level > 1)) { |
| u32 i; |
| |
| pr_debug("%s:%s:%d skreq=%x sksg_list=%p sksg_dma=%llx\n", |
| skdev->name, __func__, __LINE__, |
| skreq->id, skreq->sksg_list, skreq->sksg_dma_address); |
| for (i = 0; i < skreq->n_sg; i++) { |
| struct fit_sg_descriptor *sgd = &skreq->sksg_list[i]; |
| |
| pr_debug("%s:%s:%d sg[%d] count=%u ctrl=0x%x " |
| "addr=0x%llx next=0x%llx\n", |
| skdev->name, __func__, __LINE__, |
| i, sgd->byte_count, sgd->control, |
| sgd->host_side_addr, sgd->next_desc_ptr); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int skd_sg_io_prep_buffering(struct skd_device *skdev, |
| struct skd_sg_io *sksgio) |
| { |
| struct skd_special_context *skspcl = sksgio->skspcl; |
| struct skd_request_context *skreq = &skspcl->req; |
| u32 dxfer_len = sksgio->dxfer_len; |
| int rc; |
| |
| rc = skd_skreq_prep_buffering(skdev, skreq, dxfer_len); |
| /* |
| * Eventually, errors or not, skd_release_special() is called |
| * to recover allocations including partial allocations. |
| */ |
| return rc; |
| } |
| |
| static int skd_sg_io_copy_buffer(struct skd_device *skdev, |
| struct skd_sg_io *sksgio, int dxfer_dir) |
| { |
| struct skd_special_context *skspcl = sksgio->skspcl; |
| u32 iov_ix = 0; |
| struct sg_iovec curiov; |
| u32 sksg_ix = 0; |
| u8 *bufp = NULL; |
| u32 buf_len = 0; |
| u32 resid = sksgio->dxfer_len; |
| int rc; |
| |
| curiov.iov_len = 0; |
| curiov.iov_base = NULL; |
| |
| if (dxfer_dir != sksgio->sg.dxfer_direction) { |
| if (dxfer_dir != SG_DXFER_TO_DEV || |
| sksgio->sg.dxfer_direction != SG_DXFER_TO_FROM_DEV) |
| return 0; |
| } |
| |
| while (resid > 0) { |
| u32 nbytes = PAGE_SIZE; |
| |
| if (curiov.iov_len == 0) { |
| curiov = sksgio->iov[iov_ix++]; |
| continue; |
| } |
| |
| if (buf_len == 0) { |
| struct page *page; |
| page = sg_page(&skspcl->req.sg[sksg_ix++]); |
| bufp = page_address(page); |
| buf_len = PAGE_SIZE; |
| } |
| |
| nbytes = min_t(u32, nbytes, resid); |
| nbytes = min_t(u32, nbytes, curiov.iov_len); |
| nbytes = min_t(u32, nbytes, buf_len); |
| |
| if (dxfer_dir == SG_DXFER_TO_DEV) |
| rc = __copy_from_user(bufp, curiov.iov_base, nbytes); |
| else |
| rc = __copy_to_user(curiov.iov_base, bufp, nbytes); |
| |
| if (rc) |
| return -EFAULT; |
| |
| resid -= nbytes; |
| curiov.iov_len -= nbytes; |
| curiov.iov_base += nbytes; |
| buf_len -= nbytes; |
| } |
| |
| return 0; |
| } |
| |
| static int skd_sg_io_send_fitmsg(struct skd_device *skdev, |
| struct skd_sg_io *sksgio) |
| { |
| struct skd_special_context *skspcl = sksgio->skspcl; |
| struct fit_msg_hdr *fmh = (struct fit_msg_hdr *)skspcl->msg_buf; |
| struct skd_scsi_request *scsi_req = (struct skd_scsi_request *)&fmh[1]; |
| |
| memset(skspcl->msg_buf, 0, SKD_N_SPECIAL_FITMSG_BYTES); |
| |
| /* Initialize the FIT msg header */ |
| fmh->protocol_id = FIT_PROTOCOL_ID_SOFIT; |
| fmh->num_protocol_cmds_coalesced = 1; |
| |
| /* Initialize the SCSI request */ |
| if (sksgio->sg.dxfer_direction != SG_DXFER_NONE) |
| scsi_req->hdr.sg_list_dma_address = |
| cpu_to_be64(skspcl->req.sksg_dma_address); |
| scsi_req->hdr.tag = skspcl->req.id; |
| scsi_req->hdr.sg_list_len_bytes = |
| cpu_to_be32(skspcl->req.sg_byte_count); |
| memcpy(scsi_req->cdb, sksgio->cdb, sizeof(scsi_req->cdb)); |
| |
| skspcl->req.state = SKD_REQ_STATE_BUSY; |
| skd_send_special_fitmsg(skdev, skspcl); |
| |
| return 0; |
| } |
| |
| static int skd_sg_io_await(struct skd_device *skdev, struct skd_sg_io *sksgio) |
| { |
| unsigned long flags; |
| int rc; |
| |
| rc = wait_event_interruptible_timeout(skdev->waitq, |
| (sksgio->skspcl->req.state != |
| SKD_REQ_STATE_BUSY), |
| msecs_to_jiffies(sksgio->sg. |
| timeout)); |
| |
| spin_lock_irqsave(&skdev->lock, flags); |
| |
| if (sksgio->skspcl->req.state == SKD_REQ_STATE_ABORTED) { |
| pr_debug("%s:%s:%d skspcl %p aborted\n", |
| skdev->name, __func__, __LINE__, sksgio->skspcl); |
| |
| /* Build check cond, sense and let command finish. */ |
| /* For a timeout, we must fabricate completion and sense |
| * data to complete the command */ |
| sksgio->skspcl->req.completion.status = |
| SAM_STAT_CHECK_CONDITION; |
| |
| memset(&sksgio->skspcl->req.err_info, 0, |
| sizeof(sksgio->skspcl->req.err_info)); |
| sksgio->skspcl->req.err_info.type = 0x70; |
| sksgio->skspcl->req.err_info.key = ABORTED_COMMAND; |
| sksgio->skspcl->req.err_info.code = 0x44; |
| sksgio->skspcl->req.err_info.qual = 0; |
| rc = 0; |
| } else if (sksgio->skspcl->req.state != SKD_REQ_STATE_BUSY) |
| /* No longer on the adapter. We finish. */ |
| rc = 0; |
| else { |
| /* Something's gone wrong. Still busy. Timeout or |
| * user interrupted (control-C). Mark as an orphan |
| * so it will be disposed when completed. */ |
| sksgio->skspcl->orphaned = 1; |
| sksgio->skspcl = NULL; |
| if (rc == 0) { |
| pr_debug("%s:%s:%d timed out %p (%u ms)\n", |
| skdev->name, __func__, __LINE__, |
| sksgio, sksgio->sg.timeout); |
| rc = -ETIMEDOUT; |
| } else { |
| pr_debug("%s:%s:%d cntlc %p\n", |
| skdev->name, __func__, __LINE__, sksgio); |
| rc = -EINTR; |
| } |
| } |
| |
| spin_unlock_irqrestore(&skdev->lock, flags); |
| |
| return rc; |
| } |
| |
| static int skd_sg_io_put_status(struct skd_device *skdev, |
| struct skd_sg_io *sksgio) |
| { |
| struct sg_io_hdr *sgp = &sksgio->sg; |
| struct skd_special_context *skspcl = sksgio->skspcl; |
| int resid = 0; |
| |
| u32 nb = be32_to_cpu(skspcl->req.completion.num_returned_bytes); |
| |
| sgp->status = skspcl->req.completion.status; |
| resid = sksgio->dxfer_len - nb; |
| |
| sgp->masked_status = sgp->status & STATUS_MASK; |
| sgp->msg_status = 0; |
| sgp->host_status = 0; |
| sgp->driver_status = 0; |
| sgp->resid = resid; |
| if (sgp->masked_status || sgp->host_status || sgp->driver_status) |
| sgp->info |= SG_INFO_CHECK; |
| |
| pr_debug("%s:%s:%d status %x masked %x resid 0x%x\n", |
| skdev->name, __func__, __LINE__, |
| sgp->status, sgp->masked_status, sgp->resid); |
| |
| if (sgp->masked_status == SAM_STAT_CHECK_CONDITION) { |
| if (sgp->mx_sb_len > 0) { |
| struct fit_comp_error_info *ei = &skspcl->req.err_info; |
| u32 nbytes = sizeof(*ei); |
| |
| nbytes = min_t(u32, nbytes, sgp->mx_sb_len); |
| |
| sgp->sb_len_wr = nbytes; |
| |
| if (__copy_to_user(sgp->sbp, ei, nbytes)) { |
| pr_debug("%s:%s:%d copy_to_user sense failed %p\n", |
| skdev->name, __func__, __LINE__, |
| sgp->sbp); |
| return -EFAULT; |
| } |
| } |
| } |
| |
| if (__copy_to_user(sksgio->argp, sgp, sizeof(sg_io_hdr_t))) { |
| pr_debug("%s:%s:%d copy_to_user sg failed %p\n", |
| skdev->name, __func__, __LINE__, sksgio->argp); |
| return -EFAULT; |
| } |
| |
| return 0; |
| } |
| |
| static int skd_sg_io_release_skspcl(struct skd_device *skdev, |
| struct skd_sg_io *sksgio) |
| { |
| struct skd_special_context *skspcl = sksgio->skspcl; |
| |
| if (skspcl != NULL) { |
| ulong flags; |
| |
| sksgio->skspcl = NULL; |
| |
| spin_lock_irqsave(&skdev->lock, flags); |
| skd_release_special(skdev, skspcl); |
| spin_unlock_irqrestore(&skdev->lock, flags); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| ***************************************************************************** |
| * INTERNAL REQUESTS -- generated by driver itself |
| ***************************************************************************** |
| */ |
| |
| static int skd_format_internal_skspcl(struct skd_device *skdev) |
| { |
| struct skd_special_context *skspcl = &skdev->internal_skspcl; |
| struct fit_sg_descriptor *sgd = &skspcl->req.sksg_list[0]; |
| struct fit_msg_hdr *fmh; |
| uint64_t dma_address; |
| struct skd_scsi_request *scsi; |
| |
| fmh = (struct fit_msg_hdr *)&skspcl->msg_buf[0]; |
| fmh->protocol_id = FIT_PROTOCOL_ID_SOFIT; |
| fmh->num_protocol_cmds_coalesced = 1; |
| |
| scsi = (struct skd_scsi_request *)&skspcl->msg_buf[64]; |
| memset(scsi, 0, sizeof(*scsi)); |
| dma_address = skspcl->req.sksg_dma_address; |
| scsi->hdr.sg_list_dma_address = cpu_to_be64(dma_address); |
| sgd->control = FIT_SGD_CONTROL_LAST; |
| sgd->byte_count = 0; |
| sgd->host_side_addr = skspcl->db_dma_address; |
| sgd->dev_side_addr = 0; |
| sgd->next_desc_ptr = 0LL; |
| |
| return 1; |
| } |
| |
| #define WR_BUF_SIZE SKD_N_INTERNAL_BYTES |
| |
| static void skd_send_internal_skspcl(struct skd_device *skdev, |
| struct skd_special_context *skspcl, |
| u8 opcode) |
| { |
| struct fit_sg_descriptor *sgd = &skspcl->req.sksg_list[0]; |
| struct skd_scsi_request *scsi; |
| unsigned char *buf = skspcl->data_buf; |
| int i; |
| |
| if (skspcl->req.state != SKD_REQ_STATE_IDLE) |
| /* |
| * A refresh is already in progress. |
| * Just wait for it to finish. |
| */ |
| return; |
| |
| SKD_ASSERT((skspcl->req.id & SKD_ID_INCR) == 0); |
| skspcl->req.state = SKD_REQ_STATE_BUSY; |
| skspcl->req.id += SKD_ID_INCR; |
| |
| scsi = (struct skd_scsi_request *)&skspcl->msg_buf[64]; |
| scsi->hdr.tag = skspcl->req.id; |
| |
| memset(scsi->cdb, 0, sizeof(scsi->cdb)); |
| |
| switch (opcode) { |
| case TEST_UNIT_READY: |
| scsi->cdb[0] = TEST_UNIT_READY; |
| sgd->byte_count = 0; |
| scsi->hdr.sg_list_len_bytes = 0; |
| break; |
| |
| case READ_CAPACITY: |
| scsi->cdb[0] = READ_CAPACITY; |
| sgd->byte_count = SKD_N_READ_CAP_BYTES; |
| scsi->hdr.sg_list_len_bytes = cpu_to_be32(sgd->byte_count); |
| break; |
| |
| case INQUIRY: |
| scsi->cdb[0] = INQUIRY; |
| scsi->cdb[1] = 0x01; /* evpd */ |
| scsi->cdb[2] = 0x80; /* serial number page */ |
| scsi->cdb[4] = 0x10; |
| sgd->byte_count = 16; |
| scsi->hdr.sg_list_len_bytes = cpu_to_be32(sgd->byte_count); |
| break; |
| |
| case SYNCHRONIZE_CACHE: |
| scsi->cdb[0] = SYNCHRONIZE_CACHE; |
| sgd->byte_count = 0; |
| scsi->hdr.sg_list_len_bytes = 0; |
| break; |
| |
| case WRITE_BUFFER: |
| scsi->cdb[0] = WRITE_BUFFER; |
| scsi->cdb[1] = 0x02; |
| scsi->cdb[7] = (WR_BUF_SIZE & 0xFF00) >> 8; |
| scsi->cdb[8] = WR_BUF_SIZE & 0xFF; |
| sgd->byte_count = WR_BUF_SIZE; |
| scsi->hdr.sg_list_len_bytes = cpu_to_be32(sgd->byte_count); |
| /* fill incrementing byte pattern */ |
| for (i = 0; i < sgd->byte_count; i++) |
| buf[i] = i & 0xFF; |
| break; |
| |
| case READ_BUFFER: |
| scsi->cdb[0] = READ_BUFFER; |
| scsi->cdb[1] = 0x02; |
| scsi->cdb[7] = (WR_BUF_SIZE & 0xFF00) >> 8; |
| scsi->cdb[8] = WR_BUF_SIZE & 0xFF; |
| sgd->byte_count = WR_BUF_SIZE; |
| scsi->hdr.sg_list_len_bytes = cpu_to_be32(sgd->byte_count); |
| memset(skspcl->data_buf, 0, sgd->byte_count); |
| break; |
| |
| default: |
| SKD_ASSERT("Don't know what to send"); |
| return; |
| |
| } |
| skd_send_special_fitmsg(skdev, skspcl); |
| } |
| |
| static void skd_refresh_device_data(struct skd_device *skdev) |
| { |
| struct skd_special_context *skspcl = &skdev->internal_skspcl; |
| |
| skd_send_internal_skspcl(skdev, skspcl, TEST_UNIT_READY); |
| } |
| |
| static int skd_chk_read_buf(struct skd_device *skdev, |
| struct skd_special_context *skspcl) |
| { |
| unsigned char *buf = skspcl->data_buf; |
| int i; |
| |
| /* check for incrementing byte pattern */ |
| for (i = 0; i < WR_BUF_SIZE; i++) |
| if (buf[i] != (i & 0xFF)) |
| return 1; |
| |
| return 0; |
| } |
| |
| static void skd_log_check_status(struct skd_device *skdev, u8 status, u8 key, |
| u8 code, u8 qual, u8 fruc) |
| { |
| /* If the check condition is of special interest, log a message */ |
| if ((status == SAM_STAT_CHECK_CONDITION) && (key == 0x02) |
| && (code == 0x04) && (qual == 0x06)) { |
| pr_err("(%s): *** LOST_WRITE_DATA ERROR *** key/asc/" |
| "ascq/fruc %02x/%02x/%02x/%02x\n", |
| skd_name(skdev), key, code, qual, fruc); |
| } |
| } |
| |
| static void skd_complete_internal(struct skd_device *skdev, |
| volatile struct fit_completion_entry_v1 |
| *skcomp, |
| volatile struct fit_comp_error_info *skerr, |
| struct skd_special_context *skspcl) |
| { |
| u8 *buf = skspcl->data_buf; |
| u8 status; |
| int i; |
| struct skd_scsi_request *scsi = |
| (struct skd_scsi_request *)&skspcl->msg_buf[64]; |
| |
| SKD_ASSERT(skspcl == &skdev->internal_skspcl); |
| |
| pr_debug("%s:%s:%d complete internal %x\n", |
| skdev->name, __func__, __LINE__, scsi->cdb[0]); |
| |
| skspcl->req.completion = *skcomp; |
| skspcl->req.state = SKD_REQ_STATE_IDLE; |
| skspcl->req.id += SKD_ID_INCR; |
| |
| status = skspcl->req.completion.status; |
| |
| skd_log_check_status(skdev, status, skerr->key, skerr->code, |
| skerr->qual, skerr->fruc); |
| |
| switch (scsi->cdb[0]) { |
| case TEST_UNIT_READY: |
| if (status == SAM_STAT_GOOD) |
| skd_send_internal_skspcl(skdev, skspcl, WRITE_BUFFER); |
| else if ((status == SAM_STAT_CHECK_CONDITION) && |
| (skerr->key == MEDIUM_ERROR)) |
| skd_send_internal_skspcl(skdev, skspcl, WRITE_BUFFER); |
| else { |
| if (skdev->state == SKD_DRVR_STATE_STOPPING) { |
| pr_debug("%s:%s:%d TUR failed, don't send anymore state 0x%x\n", |
| skdev->name, __func__, __LINE__, |
| skdev->state); |
| return; |
| } |
| pr_debug("%s:%s:%d **** TUR failed, retry skerr\n", |
| skdev->name, __func__, __LINE__); |
| skd_send_internal_skspcl(skdev, skspcl, 0x00); |
| } |
| break; |
| |
| case WRITE_BUFFER: |
| if (status == SAM_STAT_GOOD) |
| skd_send_internal_skspcl(skdev, skspcl, READ_BUFFER); |
| else { |
| if (skdev->state == SKD_DRVR_STATE_STOPPING) { |
| pr_debug("%s:%s:%d write buffer failed, don't send anymore state 0x%x\n", |
| skdev->name, __func__, __LINE__, |
| skdev->state); |
| return; |
| } |
| pr_debug("%s:%s:%d **** write buffer failed, retry skerr\n", |
| skdev->name, __func__, __LINE__); |
| skd_send_internal_skspcl(skdev, skspcl, 0x00); |
| } |
| break; |
| |
| case READ_BUFFER: |
| if (status == SAM_STAT_GOOD) { |
| if (skd_chk_read_buf(skdev, skspcl) == 0) |
| skd_send_internal_skspcl(skdev, skspcl, |
| READ_CAPACITY); |
| else { |
| pr_err( |
| "(%s):*** W/R Buffer mismatch %d ***\n", |
| skd_name(skdev), skdev->connect_retries); |
| if (skdev->connect_retries < |
| SKD_MAX_CONNECT_RETRIES) { |
| skdev->connect_retries++; |
| skd_soft_reset(skdev); |
| } else { |
| pr_err( |
| "(%s): W/R Buffer Connect Error\n", |
| skd_name(skdev)); |
| return; |
| } |
| } |
| |
| } else { |
| if (skdev->state == SKD_DRVR_STATE_STOPPING) { |
| pr_debug("%s:%s:%d " |
| "read buffer failed, don't send anymore state 0x%x\n", |
| skdev->name, __func__, __LINE__, |
| skdev->state); |
| return; |
| } |
| pr_debug("%s:%s:%d " |
| "**** read buffer failed, retry skerr\n", |
| skdev->name, __func__, __LINE__); |
| skd_send_internal_skspcl(skdev, skspcl, 0x00); |
| } |
| break; |
| |
| case READ_CAPACITY: |
| skdev->read_cap_is_valid = 0; |
| if (status == SAM_STAT_GOOD) { |
| skdev->read_cap_last_lba = |
| (buf[0] << 24) | (buf[1] << 16) | |
| (buf[2] << 8) | buf[3]; |
| skdev->read_cap_blocksize = |
| (buf[4] << 24) | (buf[5] << 16) | |
| (buf[6] << 8) | buf[7]; |
| |
| pr_debug("%s:%s:%d last lba %d, bs %d\n", |
| skdev->name, __func__, __LINE__, |
| skdev->read_cap_last_lba, |
| skdev->read_cap_blocksize); |
| |
| set_capacity(skdev->disk, skdev->read_cap_last_lba + 1); |
| |
| skdev->read_cap_is_valid = 1; |
| |
| skd_send_internal_skspcl(skdev, skspcl, INQUIRY); |
| } else if ((status == SAM_STAT_CHECK_CONDITION) && |
| (skerr->key == MEDIUM_ERROR)) { |
| skdev->read_cap_last_lba = ~0; |
| set_capacity(skdev->disk, skdev->read_cap_last_lba + 1); |
| pr_debug("%s:%s:%d " |
| "**** MEDIUM ERROR caused READCAP to fail, ignore failure and continue to inquiry\n", |
| skdev->name, __func__, __LINE__); |
| skd_send_internal_skspcl(skdev, skspcl, INQUIRY); |
| } else { |
| pr_debug("%s:%s:%d **** READCAP failed, retry TUR\n", |
| skdev->name, __func__, __LINE__); |
| skd_send_internal_skspcl(skdev, skspcl, |
| TEST_UNIT_READY); |
| } |
| break; |
| |
| case INQUIRY: |
| skdev->inquiry_is_valid = 0; |
| if (status == SAM_STAT_GOOD) { |
| skdev->inquiry_is_valid = 1; |
| |
| for (i = 0; i < 12; i++) |
| skdev->inq_serial_num[i] = buf[i + 4]; |
| skdev->inq_serial_num[12] = 0; |
| } |
| |
| if (skd_unquiesce_dev(skdev) < 0) |
| pr_debug("%s:%s:%d **** failed, to ONLINE device\n", |
| skdev->name, __func__, __LINE__); |
| /* connection is complete */ |
| skdev->connect_retries = 0; |
| break; |
| |
| case SYNCHRONIZE_CACHE: |
| if (status == SAM_STAT_GOOD) |
| skdev->sync_done = 1; |
| else |
| skdev->sync_done = -1; |
| wake_up_interruptible(&skdev->waitq); |
| break; |
| |
| default: |
| SKD_ASSERT("we didn't send this"); |
| } |
| } |
| |
| /* |
| ***************************************************************************** |
| * FIT MESSAGES |
| ***************************************************************************** |
| */ |
| |
| static void skd_send_fitmsg(struct skd_device *skdev, |
| struct skd_fitmsg_context *skmsg) |
| { |
| u64 qcmd; |
| struct fit_msg_hdr *fmh; |
| |
| pr_debug("%s:%s:%d dma address 0x%llx, busy=%d\n", |
| skdev->name, __func__, __LINE__, |
| skmsg->mb_dma_address, skdev->in_flight); |
| pr_debug("%s:%s:%d msg_buf 0x%p, offset %x\n", |
| skdev->name, __func__, __LINE__, |
| skmsg->msg_buf, skmsg->offset); |
| |
| qcmd = skmsg->mb_dma_address; |
| qcmd |= FIT_QCMD_QID_NORMAL; |
| |
| fmh = (struct fit_msg_hdr *)skmsg->msg_buf; |
| skmsg->outstanding = fmh->num_protocol_cmds_coalesced; |
| |
| if (unlikely(skdev->dbg_level > 1)) { |
| u8 *bp = (u8 *)skmsg->msg_buf; |
| int i; |
| for (i = 0; i < skmsg->length; i += 8) { |
| pr_debug("%s:%s:%d msg[%2d] %02x %02x %02x %02x " |
| "%02x %02x %02x %02x\n", |
| skdev->name, __func__, __LINE__, |
| i, bp[i + 0], bp[i + 1], bp[i + 2], |
| bp[i + 3], bp[i + 4], bp[i + 5], |
| bp[i + 6], bp[i + 7]); |
| if (i == 0) |
| i = 64 - 8; |
| } |
| } |
| |
| if (skmsg->length > 256) |
| qcmd |= FIT_QCMD_MSGSIZE_512; |
| else if (skmsg->length > 128) |
| qcmd |= FIT_QCMD_MSGSIZE_256; |
| else if (skmsg->length > 64) |
| qcmd |= FIT_QCMD_MSGSIZE_128; |
| else |
| /* |
| * This makes no sense because the FIT msg header is |
| * 64 bytes. If the msg is only 64 bytes long it has |
| * no payload. |
| */ |
| qcmd |= FIT_QCMD_MSGSIZE_64; |
| |
| SKD_WRITEQ(skdev, qcmd, FIT_Q_COMMAND); |
| |
| } |
| |
| static void skd_send_special_fitmsg(struct skd_device *skdev, |
| struct skd_special_context *skspcl) |
| { |
| u64 qcmd; |
| |
| if (unlikely(skdev->dbg_level > 1)) { |
| u8 *bp = (u8 *)skspcl->msg_buf; |
| int i; |
| |
| for (i = 0; i < SKD_N_SPECIAL_FITMSG_BYTES; i += 8) { |
| pr_debug("%s:%s:%d spcl[%2d] %02x %02x %02x %02x " |
| "%02x %02x %02x %02x\n", |
| skdev->name, __func__, __LINE__, i, |
| bp[i + 0], bp[i + 1], bp[i + 2], bp[i + 3], |
| bp[i + 4], bp[i + 5], bp[i + 6], bp[i + 7]); |
| if (i == 0) |
| i = 64 - 8; |
| } |
| |
| pr_debug("%s:%s:%d skspcl=%p id=%04x sksg_list=%p sksg_dma=%llx\n", |
| skdev->name, __func__, __LINE__, |
| skspcl, skspcl->req.id, skspcl->req.sksg_list, |
| skspcl->req.sksg_dma_address); |
| for (i = 0; i < skspcl->req.n_sg; i++) { |
| struct fit_sg_descriptor *sgd = |
| &skspcl->req.sksg_list[i]; |
| |
| pr_debug("%s:%s:%d sg[%d] count=%u ctrl=0x%x " |
| "addr=0x%llx next=0x%llx\n", |
| skdev->name, __func__, __LINE__, |
| i, sgd->byte_count, sgd->control, |
| sgd->host_side_addr, sgd->next_desc_ptr); |
| } |
| } |
| |
| /* |
| * Special FIT msgs are always 128 bytes: a 64-byte FIT hdr |
| * and one 64-byte SSDI command. |
| */ |
| qcmd = skspcl->mb_dma_address; |
| qcmd |= FIT_QCMD_QID_NORMAL + FIT_QCMD_MSGSIZE_128; |
| |
| SKD_WRITEQ(skdev, qcmd, FIT_Q_COMMAND); |
| } |
| |
| /* |
| ***************************************************************************** |
| * COMPLETION QUEUE |
| ***************************************************************************** |
| */ |
| |
| static void skd_complete_other(struct skd_device *skdev, |
| volatile struct fit_completion_entry_v1 *skcomp, |
| volatile struct fit_comp_error_info *skerr); |
| |
| struct sns_info { |
| u8 type; |
| u8 stat; |
| u8 key; |
| u8 asc; |
| u8 ascq; |
| u8 mask; |
| enum skd_check_status_action action; |
| }; |
| |
| static struct sns_info skd_chkstat_table[] = { |
| /* Good */ |
| { 0x70, 0x02, RECOVERED_ERROR, 0, 0, 0x1c, |
| SKD_CHECK_STATUS_REPORT_GOOD }, |
| |
| /* Smart alerts */ |
| { 0x70, 0x02, NO_SENSE, 0x0B, 0x00, 0x1E, /* warnings */ |
| SKD_CHECK_STATUS_REPORT_SMART_ALERT }, |
| { 0x70, 0x02, NO_SENSE, 0x5D, 0x00, 0x1E, /* thresholds */ |
| SKD_CHECK_STATUS_REPORT_SMART_ALERT }, |
| { 0x70, 0x02, RECOVERED_ERROR, 0x0B, 0x01, 0x1F, /* temperature over trigger */ |
| SKD_CHECK_STATUS_REPORT_SMART_ALERT }, |
| |
| /* Retry (with limits) */ |
| { 0x70, 0x02, 0x0B, 0, 0, 0x1C, /* This one is for DMA ERROR */ |
| SKD_CHECK_STATUS_REQUEUE_REQUEST }, |
| { 0x70, 0x02, 0x06, 0x0B, 0x00, 0x1E, /* warnings */ |
| SKD_CHECK_STATUS_REQUEUE_REQUEST }, |
| { 0x70, 0x02, 0x06, 0x5D, 0x00, 0x1E, /* thresholds */ |
| SKD_CHECK_STATUS_REQUEUE_REQUEST }, |
| { 0x70, 0x02, 0x06, 0x80, 0x30, 0x1F, /* backup power */ |
| SKD_CHECK_STATUS_REQUEUE_REQUEST }, |
| |
| /* Busy (or about to be) */ |
| { 0x70, 0x02, 0x06, 0x3f, 0x01, 0x1F, /* fw changed */ |
| SKD_CHECK_STATUS_BUSY_IMMINENT }, |
| }; |
| |
| /* |
| * Look up status and sense data to decide how to handle the error |
| * from the device. |
| * mask says which fields must match e.g., mask=0x18 means check |
| * type and stat, ignore key, asc, ascq. |
| */ |
| |
| static enum skd_check_status_action |
| skd_check_status(struct skd_device *skdev, |
| u8 cmp_status, volatile struct fit_comp_error_info *skerr) |
| { |
| int i, n; |
| |
| pr_err("(%s): key/asc/ascq/fruc %02x/%02x/%02x/%02x\n", |
| skd_name(skdev), skerr->key, skerr->code, skerr->qual, |
| skerr->fruc); |
| |
| pr_debug("%s:%s:%d stat: t=%02x stat=%02x k=%02x c=%02x q=%02x fruc=%02x\n", |
| skdev->name, __func__, __LINE__, skerr->type, cmp_status, |
| skerr->key, skerr->code, skerr->qual, skerr->fruc); |
| |
| /* Does the info match an entry in the good category? */ |
| n = sizeof(skd_chkstat_table) / sizeof(skd_chkstat_table[0]); |
| for (i = 0; i < n; i++) { |
| struct sns_info *sns = &skd_chkstat_table[i]; |
| |
| if (sns->mask & 0x10) |
| if (skerr->type != sns->type) |
| continue; |
| |
| if (sns->mask & 0x08) |
| if (cmp_status != sns->stat) |
| continue; |
| |
| if (sns->mask & 0x04) |
| if (skerr->key != sns->key) |
| continue; |
| |
| if (sns->mask & 0x02) |
| if (skerr->code != sns->asc) |
| continue; |
| |
| if (sns->mask & 0x01) |
| if (skerr->qual != sns->ascq) |
| continue; |
| |
| if (sns->action == SKD_CHECK_STATUS_REPORT_SMART_ALERT) { |
| pr_err("(%s): SMART Alert: sense key/asc/ascq " |
| "%02x/%02x/%02x\n", |
| skd_name(skdev), skerr->key, |
| skerr->code, skerr->qual); |
| } |
| return sns->action; |
| } |
| |
| /* No other match, so nonzero status means error, |
| * zero status means good |
| */ |
| if (cmp_status) { |
| pr_debug("%s:%s:%d status check: error\n", |
| skdev->name, __func__, __LINE__); |
| return SKD_CHECK_STATUS_REPORT_ERROR; |
| } |
| |
| pr_debug("%s:%s:%d status check good default\n", |
| skdev->name, __func__, __LINE__); |
| return SKD_CHECK_STATUS_REPORT_GOOD; |
| } |
| |
| static void skd_resolve_req_exception(struct skd_device *skdev, |
| struct skd_request_context *skreq) |
| { |
| u8 cmp_status = skreq->completion.status; |
| |
| switch (skd_check_status(skdev, cmp_status, &skreq->err_info)) { |
| case SKD_CHECK_STATUS_REPORT_GOOD: |
| case SKD_CHECK_STATUS_REPORT_SMART_ALERT: |
| skd_end_request(skdev, skreq, 0); |
| break; |
| |
| case SKD_CHECK_STATUS_BUSY_IMMINENT: |
| skd_log_skreq(skdev, skreq, "retry(busy)"); |
| blk_requeue_request(skdev->queue, skreq->req); |
| pr_info("(%s) drive BUSY imminent\n", skd_name(skdev)); |
| skdev->state = SKD_DRVR_STATE_BUSY_IMMINENT; |
| skdev->timer_countdown = SKD_TIMER_MINUTES(20); |
| skd_quiesce_dev(skdev); |
| break; |
| |
| case SKD_CHECK_STATUS_REQUEUE_REQUEST: |
| if ((unsigned long) ++skreq->req->special < SKD_MAX_RETRIES) { |
| skd_log_skreq(skdev, skreq, "retry"); |
| blk_requeue_request(skdev->queue, skreq->req); |
| break; |
| } |
| /* fall through to report error */ |
| |
| case SKD_CHECK_STATUS_REPORT_ERROR: |
| default: |
| skd_end_request(skdev, skreq, -EIO); |
| break; |
| } |
| } |
| |
| /* assume spinlock is already held */ |
| static void skd_release_skreq(struct skd_device *skdev, |
| struct skd_request_context *skreq) |
| { |
| u32 msg_slot; |
| struct skd_fitmsg_context *skmsg; |
| |
| u32 timo_slot; |
| |
| /* |
| * Reclaim the FIT msg buffer if this is |
| * the first of the requests it carried to |
| * be completed. The FIT msg buffer used to |
| * send this request cannot be reused until |
| * we are sure the s1120 card has copied |
| * it to its memory. The FIT msg might have |
| * contained several requests. As soon as |
| * any of them are completed we know that |
| * the entire FIT msg was transferred. |
| * Only the first completed request will |
| * match the FIT msg buffer id. The FIT |
| * msg buffer id is immediately updated. |
| * When subsequent requests complete the FIT |
| * msg buffer id won't match, so we know |
| * quite cheaply that it is already done. |
| */ |
| msg_slot = skreq->fitmsg_id & SKD_ID_SLOT_MASK; |
| SKD_ASSERT(msg_slot < skdev->num_fitmsg_context); |
| |
| skmsg = &skdev->skmsg_table[msg_slot]; |
| if (skmsg->id == skreq->fitmsg_id) { |
| SKD_ASSERT(skmsg->state == SKD_MSG_STATE_BUSY); |
| SKD_ASSERT(skmsg->outstanding > 0); |
| skmsg->outstanding--; |
| if (skmsg->outstanding == 0) { |
| skmsg->state = SKD_MSG_STATE_IDLE; |
| skmsg->id += SKD_ID_INCR; |
| skmsg->next = skdev->skmsg_free_list; |
| skdev->skmsg_free_list = skmsg; |
| } |
| } |
| |
| /* |
| * Decrease the number of active requests. |
| * Also decrements the count in the timeout slot. |
| */ |
| SKD_ASSERT(skdev->in_flight > 0); |
| skdev->in_flight -= 1; |
| |
| timo_slot = skreq->timeout_stamp & SKD_TIMEOUT_SLOT_MASK; |
| SKD_ASSERT(skdev->timeout_slot[timo_slot] > 0); |
| skdev->timeout_slot[timo_slot] -= 1; |
| |
| /* |
| * Reset backpointer |
| */ |
| skreq->req = NULL; |
| |
| /* |
| * Reclaim the skd_request_context |
| */ |
| skreq->state = SKD_REQ_STATE_IDLE; |
| skreq->id += SKD_ID_INCR; |
| skreq->next = skdev->skreq_free_list; |
| skdev->skreq_free_list = skreq; |
| } |
| |
| #define DRIVER_INQ_EVPD_PAGE_CODE 0xDA |
| |
| static void skd_do_inq_page_00(struct skd_device *skdev, |
| volatile struct fit_completion_entry_v1 *skcomp, |
| volatile struct fit_comp_error_info *skerr, |
| uint8_t *cdb, uint8_t *buf) |
| { |
| uint16_t insert_pt, max_bytes, drive_pages, drive_bytes, new_size; |
| |
| /* Caller requested "supported pages". The driver needs to insert |
| * its page. |
| */ |
| pr_debug("%s:%s:%d skd_do_driver_inquiry: modify supported pages.\n", |
| skdev->name, __func__, __LINE__); |
| |
| /* If the device rejected the request because the CDB was |
| * improperly formed, then just leave. |
| */ |
| if (skcomp->status == SAM_STAT_CHECK_CONDITION && |
| skerr->key == ILLEGAL_REQUEST && skerr->code == 0x24) |
| return; |
| |
| /* Get the amount of space the caller allocated */ |
| max_bytes = (cdb[3] << 8) | cdb[4]; |
| |
| /* Get the number of pages actually returned by the device */ |
| drive_pages = (buf[2] << 8) | buf[3]; |
| drive_bytes = drive_pages + 4; |
| new_size = drive_pages + 1; |
| |
| /* Supported pages must be in numerical order, so find where |
| * the driver page needs to be inserted into the list of |
| * pages returned by the device. |
| */ |
| for (insert_pt = 4; insert_pt < drive_bytes; insert_pt++) { |
| if (buf[insert_pt] == DRIVER_INQ_EVPD_PAGE_CODE) |
| return; /* Device using this page code. abort */ |
| else if (buf[insert_pt] > DRIVER_INQ_EVPD_PAGE_CODE) |
| break; |
| } |
| |
| if (insert_pt < max_bytes) { |
| uint16_t u; |
| |
| /* Shift everything up one byte to make room. */ |
| for (u = new_size + 3; u > insert_pt; u--) |
| buf[u] = buf[u - 1]; |
| buf[insert_pt] = DRIVER_INQ_EVPD_PAGE_CODE; |
| |
| /* SCSI byte order increment of num_returned_bytes by 1 */ |
| skcomp->num_returned_bytes = |
| be32_to_cpu(skcomp->num_returned_bytes) + 1; |
| skcomp->num_returned_bytes = |
| be32_to_cpu(skcomp->num_returned_bytes); |
| } |
| |
| /* update page length field to reflect the driver's page too */ |
| buf[2] = (uint8_t)((new_size >> 8) & 0xFF); |
| buf[3] = (uint8_t)((new_size >> 0) & 0xFF); |
| } |
| |
| static void skd_get_link_info(struct pci_dev *pdev, u8 *speed, u8 *width) |
| { |
| int pcie_reg; |
| u16 pci_bus_speed; |
| u8 pci_lanes; |
| |
| pcie_reg = pci_find_capability(pdev, PCI_CAP_ID_EXP); |
| if (pcie_reg) { |
| u16 linksta; |
| pci_read_config_word(pdev, pcie_reg + PCI_EXP_LNKSTA, &linksta); |
| |
| pci_bus_speed = linksta & 0xF; |
| pci_lanes = (linksta & 0x3F0) >> 4; |
| } else { |
| *speed = STEC_LINK_UNKNOWN; |
| *width = 0xFF; |
| return; |
| } |
| |
| switch (pci_bus_speed) { |
| case 1: |
| *speed = STEC_LINK_2_5GTS; |
| break; |
| case 2: |
| *speed = STEC_LINK_5GTS; |
| break; |
| case 3: |
| *speed = STEC_LINK_8GTS; |
| break; |
| default: |
| *speed = STEC_LINK_UNKNOWN; |
| break; |
| } |
| |
| if (pci_lanes <= 0x20) |
| *width = pci_lanes; |
| else |
| *width = 0xFF; |
| } |
| |
| static void skd_do_inq_page_da(struct skd_device *skdev, |
| volatile struct fit_completion_entry_v1 *skcomp, |
| volatile struct fit_comp_error_info *skerr, |
| uint8_t *cdb, uint8_t *buf) |
| { |
| struct pci_dev *pdev = skdev->pdev; |
| unsigned max_bytes; |
| struct driver_inquiry_data inq; |
| u16 val; |
| |
| pr_debug("%s:%s:%d skd_do_driver_inquiry: return driver page\n", |
| skdev->name, __func__, __LINE__); |
| |
| memset(&inq, 0, sizeof(inq)); |
| |
| inq.page_code = DRIVER_INQ_EVPD_PAGE_CODE; |
| |
| skd_get_link_info(pdev, &inq.pcie_link_speed, &inq.pcie_link_lanes); |
| inq.pcie_bus_number = cpu_to_be16(pdev->bus->number); |
| inq.pcie_device_number = PCI_SLOT(pdev->devfn); |
| inq.pcie_function_number = PCI_FUNC(pdev->devfn); |
| |
| pci_read_config_word(pdev, PCI_VENDOR_ID, &val); |
| inq.pcie_vendor_id = cpu_to_be16(val); |
| |
| pci_read_config_word(pdev, PCI_DEVICE_ID, &val); |
| inq.pcie_device_id = cpu_to_be16(val); |
| |
| pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &val); |
| inq.pcie_subsystem_vendor_id = cpu_to_be16(val); |
| |
| pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &val); |
| inq.pcie_subsystem_device_id = cpu_to_be16(val); |
| |
| /* Driver version, fixed lenth, padded with spaces on the right */ |
| inq.driver_version_length = sizeof(inq.driver_version); |
| memset(&inq.driver_version, ' ', sizeof(inq.driver_version)); |
| memcpy(inq.driver_version, DRV_VER_COMPL, |
| min(sizeof(inq.driver_version), strlen(DRV_VER_COMPL))); |
| |
| inq.page_length = cpu_to_be16((sizeof(inq) - 4)); |
| |
| /* Clear the error set by the device */ |
| skcomp->status = SAM_STAT_GOOD; |
| memset((void *)skerr, 0, sizeof(*skerr)); |
| |
| /* copy response into output buffer */ |
| max_bytes = (cdb[3] << 8) | cdb[4]; |
| memcpy(buf, &inq, min_t(unsigned, max_bytes, sizeof(inq))); |
| |
| skcomp->num_returned_bytes = |
| be32_to_cpu(min_t(uint16_t, max_bytes, sizeof(inq))); |
| } |
| |
| static void skd_do_driver_inq(struct skd_device *skdev, |
| volatile struct fit_completion_entry_v1 *skcomp, |
| volatile struct fit_comp_error_info *skerr, |
| uint8_t *cdb, uint8_t *buf) |
| { |
| if (!buf) |
| return; |
| else if (cdb[0] != INQUIRY) |
| return; /* Not an INQUIRY */ |
| else if ((cdb[1] & 1) == 0) |
| return; /* EVPD not set */ |
| else if (cdb[2] == 0) |
| /* Need to add driver's page to supported pages list */ |
| skd_do_inq_page_00(skdev, skcomp, skerr, cdb, buf); |
| else if (cdb[2] == DRIVER_INQ_EVPD_PAGE_CODE) |
| /* Caller requested driver's page */ |
| skd_do_inq_page_da(skdev, skcomp, skerr, cdb, buf); |
| } |
| |
| static unsigned char *skd_sg_1st_page_ptr(struct scatterlist *sg) |
| { |
| if (!sg) |
| return NULL; |
| if (!sg_page(sg)) |
| return NULL; |
| return sg_virt(sg); |
| } |
| |
| static void skd_process_scsi_inq(struct skd_device *skdev, |
| volatile struct fit_completion_entry_v1 |
| *skcomp, |
| volatile struct fit_comp_error_info *skerr, |
| struct skd_special_context *skspcl) |
| { |
| uint8_t *buf; |
| struct fit_msg_hdr *fmh = (struct fit_msg_hdr *)skspcl->msg_buf; |
| struct skd_scsi_request *scsi_req = (struct skd_scsi_request *)&fmh[1]; |
| |
| dma_sync_sg_for_cpu(skdev->class_dev, skspcl->req.sg, skspcl->req.n_sg, |
| skspcl->req.sg_data_dir); |
| buf = skd_sg_1st_page_ptr(skspcl->req.sg); |
| |
| if (buf) |
| skd_do_driver_inq(skdev, skcomp, skerr, scsi_req->cdb, buf); |
| } |
| |
| |
| static int skd_isr_completion_posted(struct skd_device *skdev, |
| int limit, int *enqueued) |
| { |
| volatile struct fit_completion_entry_v1 *skcmp = NULL; |
| volatile struct fit_comp_error_info *skerr; |
| u16 req_id; |
| u32 req_slot; |
| struct skd_request_context *skreq; |
| u16 cmp_cntxt = 0; |
| u8 cmp_status = 0; |
| u8 cmp_cycle = 0; |
| u32 cmp_bytes = 0; |
| int rc = 0; |
| int processed = 0; |
| |
| for (;; ) { |
| SKD_ASSERT(skdev->skcomp_ix < SKD_N_COMPLETION_ENTRY); |
| |
| skcmp = &skdev->skcomp_table[skdev->skcomp_ix]; |
| cmp_cycle = skcmp->cycle; |
| cmp_cntxt = skcmp->tag; |
| cmp_status = skcmp->status; |
| cmp_bytes = be32_to_cpu(skcmp->num_returned_bytes); |
| |
| skerr = &skdev->skerr_table[skdev->skcomp_ix]; |
| |
| pr_debug("%s:%s:%d " |
| "cycle=%d ix=%d got cycle=%d cmdctxt=0x%x stat=%d " |
| "busy=%d rbytes=0x%x proto=%d\n", |
| skdev->name, __func__, __LINE__, skdev->skcomp_cycle, |
| skdev->skcomp_ix, cmp_cycle, cmp_cntxt, cmp_status, |
| skdev->in_flight, cmp_bytes, skdev->proto_ver); |
| |
| if (cmp_cycle != skdev->skcomp_cycle) { |
| pr_debug("%s:%s:%d end of completions\n", |
| skdev->name, __func__, __LINE__); |
| break; |
| } |
| /* |
| * Update the completion queue head index and possibly |
| * the completion cycle count. 8-bit wrap-around. |
| */ |
| skdev->skcomp_ix++; |
| if (skdev->skcomp_ix >= SKD_N_COMPLETION_ENTRY) { |
| skdev->skcomp_ix = 0; |
| skdev->skcomp_cycle++; |
| } |
| |
| /* |
| * The command context is a unique 32-bit ID. The low order |
| * bits help locate the request. The request is usually a |
| * r/w request (see skd_start() above) or a special request. |
| */ |
| req_id = cmp_cntxt; |
| req_slot = req_id & SKD_ID_SLOT_AND_TABLE_MASK; |
| |
| /* Is this other than a r/w request? */ |
| if (req_slot >= skdev->num_req_context) { |
| /* |
| * This is not a completion for a r/w request. |
| */ |
| skd_complete_other(skdev, skcmp, skerr); |
| continue; |
| } |
| |
| skreq = &skdev->skreq_table[req_slot]; |
| |
| /* |
| * Make sure the request ID for the slot matches. |
| */ |
| if (skreq->id != req_id) { |
| pr_debug("%s:%s:%d mismatch comp_id=0x%x req_id=0x%x\n", |
| skdev->name, __func__, __LINE__, |
| req_id, skreq->id); |
| { |
| u16 new_id = cmp_cntxt; |
| pr_err("(%s): Completion mismatch " |
| "comp_id=0x%04x skreq=0x%04x new=0x%04x\n", |
| skd_name(skdev), req_id, |
| skreq->id, new_id); |
| |
| continue; |
| } |
| } |
| |
| SKD_ASSERT(skreq->state == SKD_REQ_STATE_BUSY); |
| |
| if (skreq->state == SKD_REQ_STATE_ABORTED) { |
| pr_debug("%s:%s:%d reclaim req %p id=%04x\n", |
| skdev->name, __func__, __LINE__, |
| skreq, skreq->id); |
| /* a previously timed out command can |
| * now be cleaned up */ |
| skd_release_skreq(skdev, skreq); |
| continue; |
| } |
| |
| skreq->completion = *skcmp; |
| if (unlikely(cmp_status == SAM_STAT_CHECK_CONDITION)) { |
| skreq->err_info = *skerr; |
| skd_log_check_status(skdev, cmp_status, skerr->key, |
| skerr->code, skerr->qual, |
| skerr->fruc); |
| } |
| /* Release DMA resources for the request. */ |
| if (skreq->n_sg > 0) |
| skd_postop_sg_list(skdev, skreq); |
| |
| if (!skreq->req) { |
| pr_debug("%s:%s:%d NULL backptr skdreq %p, " |
| "req=0x%x req_id=0x%x\n", |
| skdev->name, __func__, __LINE__, |
| skreq, skreq->id, req_id); |
| } else { |
| /* |
| * Capture the outcome and post it back to the |
| * native request. |
| */ |
| if (likely(cmp_status == SAM_STAT_GOOD)) |
| skd_end_request(skdev, skreq, 0); |
| else |
| skd_resolve_req_exception(skdev, skreq); |
| } |
| |
| /* |
| * Release the skreq, its FIT msg (if one), timeout slot, |
| * and queue depth. |
| */ |
| skd_release_skreq(skdev, skreq); |
| |
| /* skd_isr_comp_limit equal zero means no limit */ |
| if (limit) { |
| if (++processed >= limit) { |
| rc = 1; |
| break; |
| } |
| } |
| } |
| |
| if ((skdev->state == SKD_DRVR_STATE_PAUSING) |
| && (skdev->in_flight) == 0) { |
| skdev->state = SKD_DRVR_STATE_PAUSED; |
| wake_up_interruptible(&skdev->waitq); |
| } |
| |
| return rc; |
| } |
| |
| static void skd_complete_other(struct skd_device *skdev, |
| volatile struct fit_completion_entry_v1 *skcomp, |
| volatile struct fit_comp_error_info *skerr) |
| { |
| u32 req_id = 0; |
| u32 req_table; |
| u32 req_slot; |
| struct skd_special_context *skspcl; |
| |
| req_id = skcomp->tag; |
| req_table = req_id & SKD_ID_TABLE_MASK; |
| req_slot = req_id & SKD_ID_SLOT_MASK; |
| |
| pr_debug("%s:%s:%d table=0x%x id=0x%x slot=%d\n", |
| skdev->name, __func__, __LINE__, |
| req_table, req_id, req_slot); |
| |
| /* |
| * Based on the request id, determine how to dispatch this completion. |
| * This swich/case is finding the good cases and forwarding the |
| * completion entry. Errors are reported below the switch. |
| */ |
| switch (req_table) { |
| case SKD_ID_RW_REQUEST: |
| /* |
| * The caller, skd_completion_posted_isr() above, |
| * handles r/w requests. The only way we get here |
| * is if the req_slot is out of bounds. |
| */ |
| break; |
| |
| case SKD_ID_SPECIAL_REQUEST: |
| /* |
| * Make sure the req_slot is in bounds and that the id |
| * matches. |
| */ |
| if (req_slot < skdev->n_special) { |
| skspcl = &skdev->skspcl_table[req_slot]; |
| if (skspcl->req.id == req_id && |
| skspcl->req.state == SKD_REQ_STATE_BUSY) { |
| skd_complete_special(skdev, |
| skcomp, skerr, skspcl); |
| return; |
| } |
| } |
| break; |
| |
| case SKD_ID_INTERNAL: |
| if (req_slot == 0) { |
| skspcl = &skdev->internal_skspcl; |
| if (skspcl->req.id == req_id && |
| skspcl->req.state == SKD_REQ_STATE_BUSY) { |
| skd_complete_internal(skdev, |
| skcomp, skerr, skspcl); |
| return; |
| } |
| } |
| break; |
| |
| case SKD_ID_FIT_MSG: |
| /* |
| * These id's should never appear in a completion record. |
| */ |
| break; |
| |
| default: |
| /* |
| * These id's should never appear anywhere; |
| */ |
| break; |
| } |
| |
| /* |
| * If we get here it is a bad or stale id. |
| */ |
| } |
| |
| static void skd_complete_special(struct skd_device *skdev, |
| volatile struct fit_completion_entry_v1 |
| *skcomp, |
| volatile struct fit_comp_error_info *skerr, |
| struct skd_special_context *skspcl) |
| { |
| pr_debug("%s:%s:%d completing special request %p\n", |
| skdev->name, __func__, __LINE__, skspcl); |
| if (skspcl->orphaned) { |
| /* Discard orphaned request */ |
| /* ?: Can this release directly or does it need |
| * to use a worker? */ |
| pr_debug("%s:%s:%d release orphaned %p\n", |
| skdev->name, __func__, __LINE__, skspcl); |
| skd_release_special(skdev, skspcl); |
| return; |
| } |
| |
| skd_process_scsi_inq(skdev, skcomp, skerr, skspcl); |
| |
| skspcl->req.state = SKD_REQ_STATE_COMPLETED; |
| skspcl->req.completion = *skcomp; |
| skspcl->req.err_info = *skerr; |
| |
| skd_log_check_status(skdev, skspcl->req.completion.status, skerr->key, |
| skerr->code, skerr->qual, skerr->fruc); |
| |
| wake_up_interruptible(&skdev->waitq); |
| } |
| |
| /* assume spinlock is already held */ |
| static void skd_release_special(struct skd_device *skdev, |
| struct skd_special_context *skspcl) |
| { |
| int i, was_depleted; |
| |
| for (i = 0; i < skspcl->req.n_sg; i++) { |
| struct page *page = sg_page(&skspcl->req.sg[i]); |
| __free_page(page); |
| } |
| |
| was_depleted = (skdev->skspcl_free_list == NULL); |
| |
| skspcl->req.state = SKD_REQ_STATE_IDLE; |
| skspcl->req.id += SKD_ID_INCR; |
| skspcl->req.next = |
| (struct skd_request_context *)skdev->skspcl_free_list; |
| skdev->skspcl_free_list = (struct skd_special_context *)skspcl; |
| |
| if (was_depleted) { |
| pr_debug("%s:%s:%d skspcl was depleted\n", |
| skdev->name, __func__, __LINE__); |
| /* Free list was depleted. Their might be waiters. */ |
| wake_up_interruptible(&skdev->waitq); |
| } |
| } |
| |
| static void skd_reset_skcomp(struct skd_device *skdev) |
| { |
| u32 nbytes; |
| struct fit_completion_entry_v1 *skcomp; |
| |
| nbytes = sizeof(*skcomp) * SKD_N_COMPLETION_ENTRY; |
| nbytes += sizeof(struct fit_comp_error_info) * SKD_N_COMPLETION_ENTRY; |
| |
| memset(skdev->skcomp_table, 0, nbytes); |
| |
| skdev->skcomp_ix = 0; |
| skdev->skcomp_cycle = 1; |
| } |
| |
| /* |
| ***************************************************************************** |
| * INTERRUPTS |
| ***************************************************************************** |
| */ |
| static void skd_completion_worker(struct work_struct *work) |
| { |
| struct skd_device *skdev = |
| container_of(work, struct skd_device, completion_worker); |
| unsigned long flags; |
| int flush_enqueued = 0; |
| |
| spin_lock_irqsave(&skdev->lock, flags); |
| |
| /* |
| * pass in limit=0, which means no limit.. |
| * process everything in compq |
| */ |
| skd_isr_completion_posted(skdev, 0, &flush_enqueued); |
| skd_request_fn(skdev->queue); |
| |
| spin_unlock_irqrestore(&skdev->lock, flags); |
| } |
| |
| static void skd_isr_msg_from_dev(struct skd_device *skdev); |
| |
| irqreturn_t |
| static skd_isr(int irq, void *ptr) |
| { |
| struct skd_device *skdev; |
| u32 intstat; |
| u32 ack; |
| int rc = 0; |
| int deferred = 0; |
| int flush_enqueued = 0; |
| |
| skdev = (struct skd_device *)ptr; |
| spin_lock(&skdev->lock); |
| |
| for (;; ) { |
| intstat = SKD_READL(skdev, FIT_INT_STATUS_HOST); |
| |
| ack = FIT_INT_DEF_MASK; |
| ack &= intstat; |
| |
| pr_debug("%s:%s:%d intstat=0x%x ack=0x%x\n", |
| skdev->name, __func__, __LINE__, intstat, ack); |
| |
| /* As long as there is an int pending on device, keep |
| * running loop. When none, get out, but if we've never |
| * done any processing, call completion handler? |
| */ |
| if (ack == 0) { |
| /* No interrupts on device, but run the completion |
| * processor anyway? |
| */ |
| if (rc == 0) |
| if (likely (skdev->state |
| == SKD_DRVR_STATE_ONLINE)) |
| deferred = 1; |
| break; |
| } |
| |
| rc = IRQ_HANDLED; |
| |
| SKD_WRITEL(skdev, ack, FIT_INT_STATUS_HOST); |
| |
| if (likely((skdev->state != SKD_DRVR_STATE_LOAD) && |
| (skdev->state != SKD_DRVR_STATE_STOPPING))) { |
| if (intstat & FIT_ISH_COMPLETION_POSTED) { |
| /* |
| * If we have already deferred completion |
| * processing, don't bother running it again |
| */ |
| if (deferred == 0) |
| deferred = |
| skd_isr_completion_posted(skdev, |
| skd_isr_comp_limit, &flush_enqueued); |
| } |
| |
| if (intstat & FIT_ISH_FW_STATE_CHANGE) { |
| skd_isr_fwstate(skdev); |
| if (skdev->state == SKD_DRVR_STATE_FAULT || |
| skdev->state == |
| SKD_DRVR_STATE_DISAPPEARED) { |
| spin_unlock(&skdev->lock); |
| return rc; |
| } |
| } |
| |
| if (intstat & FIT_ISH_MSG_FROM_DEV) |
| skd_isr_msg_from_dev(skdev); |
| } |
| } |
| |
| if (unlikely(flush_enqueued)) |
| skd_request_fn(skdev->queue); |
| |
| if (deferred) |
| schedule_work(&skdev->completion_worker); |
| else if (!flush_enqueued) |
| skd_request_fn(skdev->queue); |
| |
| spin_unlock(&skdev->lock); |
| |
| return rc; |
| } |
| |
| static void skd_drive_fault(struct skd_device *skdev) |
| { |
| skdev->state = SKD_DRVR_STATE_FAULT; |
| pr_err("(%s): Drive FAULT\n", skd_name(skdev)); |
| } |
|