| if ARCH_AT91 | |
| config HAVE_AT91_DATAFLASH_CARD | |
| bool | |
| config HAVE_NAND_ATMEL_BUSWIDTH_16 | |
| bool | |
| config HAVE_AT91_USART3 | |
| bool | |
| config HAVE_AT91_USART4 | |
| bool | |
| config HAVE_AT91_USART5 | |
| bool | |
| menu "Atmel AT91 System-on-Chip" | |
| choice | |
| prompt "Atmel AT91 Processor" | |
| config ARCH_AT91RM9200 | |
| bool "AT91RM9200" | |
| select CPU_ARM920T | |
| select GENERIC_CLOCKEVENTS | |
| select HAVE_AT91_USART3 | |
| config ARCH_AT91SAM9260 | |
| bool "AT91SAM9260 or AT91SAM9XE" | |
| select CPU_ARM926T | |
| select GENERIC_CLOCKEVENTS | |
| select HAVE_AT91_USART3 | |
| select HAVE_AT91_USART4 | |
| select HAVE_AT91_USART5 | |
| select HAVE_NET_MACB | |
| config ARCH_AT91SAM9261 | |
| bool "AT91SAM9261" | |
| select CPU_ARM926T | |
| select GENERIC_CLOCKEVENTS | |
| select HAVE_FB_ATMEL | |
| config ARCH_AT91SAM9G10 | |
| bool "AT91SAM9G10" | |
| select CPU_ARM926T | |
| select GENERIC_CLOCKEVENTS | |
| select HAVE_FB_ATMEL | |
| config ARCH_AT91SAM9263 | |
| bool "AT91SAM9263" | |
| select CPU_ARM926T | |
| select GENERIC_CLOCKEVENTS | |
| select HAVE_FB_ATMEL | |
| select HAVE_NET_MACB | |
| config ARCH_AT91SAM9RL | |
| bool "AT91SAM9RL" | |
| select CPU_ARM926T | |
| select GENERIC_CLOCKEVENTS | |
| select HAVE_AT91_USART3 | |
| select HAVE_FB_ATMEL | |
| config ARCH_AT91SAM9G20 | |
| bool "AT91SAM9G20" | |
| select CPU_ARM926T | |
| select GENERIC_CLOCKEVENTS | |
| select HAVE_AT91_USART3 | |
| select HAVE_AT91_USART4 | |
| select HAVE_AT91_USART5 | |
| select HAVE_NET_MACB | |
| config ARCH_AT91SAM9G45 | |
| bool "AT91SAM9G45" | |
| select CPU_ARM926T | |
| select GENERIC_CLOCKEVENTS | |
| select HAVE_AT91_USART3 | |
| select HAVE_FB_ATMEL | |
| select HAVE_NET_MACB | |
| config ARCH_AT91CAP9 | |
| bool "AT91CAP9" | |
| select CPU_ARM926T | |
| select GENERIC_CLOCKEVENTS | |
| select HAVE_FB_ATMEL | |
| config ARCH_AT572D940HF | |
| bool "AT572D940HF" | |
| select CPU_ARM926T | |
| select GENERIC_CLOCKEVENTS | |
| config ARCH_AT91X40 | |
| bool "AT91x40" | |
| select ARCH_USES_GETTIMEOFFSET | |
| endchoice | |
| config AT91_PMC_UNIT | |
| bool | |
| default !ARCH_AT91X40 | |
| # ---------------------------------------------------------- | |
| if ARCH_AT91RM9200 | |
| comment "AT91RM9200 Board Type" | |
| config MACH_ONEARM | |
| bool "Ajeco 1ARM Single Board Computer" | |
| help | |
| Select this if you are using Ajeco's 1ARM Single Board Computer. | |
| <http://www.ajeco.fi/> | |
| config ARCH_AT91RM9200DK | |
| bool "Atmel AT91RM9200-DK Development board" | |
| select HAVE_AT91_DATAFLASH_CARD | |
| help | |
| Select this if you are using Atmel's AT91RM9200-DK Development board. | |
| (Discontinued) | |
| config MACH_AT91RM9200EK | |
| bool "Atmel AT91RM9200-EK Evaluation Kit" | |
| select HAVE_AT91_DATAFLASH_CARD | |
| help | |
| Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit. | |
| <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507> | |
| config MACH_CSB337 | |
| bool "Cogent CSB337" | |
| help | |
| Select this if you are using Cogent's CSB337 board. | |
| <http://www.cogcomp.com/csb_csb337.htm> | |
| config MACH_CSB637 | |
| bool "Cogent CSB637" | |
| help | |
| Select this if you are using Cogent's CSB637 board. | |
| <http://www.cogcomp.com/csb_csb637.htm> | |
| config MACH_CARMEVA | |
| bool "Conitec ARM&EVA" | |
| help | |
| Select this if you are using Conitec's AT91RM9200-MCU-Module. | |
| <http://www.conitec.net/english/linuxboard.php> | |
| config MACH_ATEB9200 | |
| bool "Embest ATEB9200" | |
| help | |
| Select this if you are using Embest's ATEB9200 board. | |
| <http://www.embedinfo.com/english/product/ATEB9200.asp> | |
| config MACH_KB9200 | |
| bool "KwikByte KB920x" | |
| help | |
| Select this if you are using KwikByte's KB920x board. | |
| <http://www.kwikbyte.com/KB9202.html> | |
| config MACH_PICOTUX2XX | |
| bool "picotux 200" | |
| help | |
| Select this if you are using a picotux 200. | |
| <http://www.picotux.com/> | |
| config MACH_KAFA | |
| bool "Sperry-Sun KAFA board" | |
| help | |
| Select this if you are using Sperry-Sun's KAFA board. | |
| config MACH_ECBAT91 | |
| bool "emQbit ECB_AT91 SBC" | |
| select HAVE_AT91_DATAFLASH_CARD | |
| help | |
| Select this if you are using emQbit's ECB_AT91 board. | |
| <http://wiki.emqbit.com/free-ecb-at91> | |
| config MACH_YL9200 | |
| bool "ucDragon YL-9200" | |
| help | |
| Select this if you are using the ucDragon YL-9200 board. | |
| config MACH_CPUAT91 | |
| bool "Eukrea CPUAT91" | |
| help | |
| Select this if you are using the Eukrea Electromatique's | |
| CPUAT91 board <http://www.eukrea.com/>. | |
| config MACH_ECO920 | |
| bool "eco920" | |
| help | |
| Select this if you are using the eco920 board | |
| endif | |
| # ---------------------------------------------------------- | |
| if ARCH_AT91SAM9260 | |
| comment "AT91SAM9260 Variants" | |
| config ARCH_AT91SAM9260_SAM9XE | |
| bool "AT91SAM9XE" | |
| help | |
| Select this if you are using Atmel's AT91SAM9XE System-on-Chip. | |
| They are basically AT91SAM9260s with various sizes of embedded Flash. | |
| comment "AT91SAM9260 / AT91SAM9XE Board Type" | |
| config MACH_AT91SAM9260EK | |
| bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit" | |
| select HAVE_AT91_DATAFLASH_CARD | |
| select HAVE_NAND_ATMEL_BUSWIDTH_16 | |
| help | |
| Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit | |
| <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> | |
| config MACH_CAM60 | |
| bool "KwikByte KB9260 (CAM60) board" | |
| help | |
| Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260. | |
| <http://www.kwikbyte.com/KB9260.html> | |
| config MACH_SAM9_L9260 | |
| bool "Olimex SAM9-L9260 board" | |
| select HAVE_AT91_DATAFLASH_CARD | |
| help | |
| Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260. | |
| <http://www.olimex.com/dev/sam9-L9260.html> | |
| config MACH_AFEB9260 | |
| bool "Custom afeb9260 board v1" | |
| help | |
| Select this if you are using custom afeb9260 board based on | |
| open hardware design. Select this for revision 1 of the board. | |
| <svn://194.85.238.22/home/users/george/svn/arm9eb> | |
| <http://groups.google.com/group/arm9fpga-evolution-board> | |
| config MACH_USB_A9260 | |
| bool "CALAO USB-A9260" | |
| help | |
| Select this if you are using a Calao Systems USB-A9260. | |
| <http://www.calao-systems.com> | |
| config MACH_QIL_A9260 | |
| bool "CALAO QIL-A9260 board" | |
| help | |
| Select this if you are using a Calao Systems QIL-A9260 Board. | |
| <http://www.calao-systems.com> | |
| config MACH_CPU9260 | |
| bool "Eukrea CPU9260 board" | |
| help | |
| Select this if you are using a Eukrea Electromatique's | |
| CPU9260 Board <http://www.eukrea.com/> | |
| config MACH_FLEXIBITY | |
| bool "Flexibity Connect board" | |
| help | |
| Select this if you are using Flexibity Connect board | |
| <http://www.flexibity.com> | |
| endif | |
| # ---------------------------------------------------------- | |
| if ARCH_AT91SAM9261 | |
| comment "AT91SAM9261 Board Type" | |
| config MACH_AT91SAM9261EK | |
| bool "Atmel AT91SAM9261-EK Evaluation Kit" | |
| select HAVE_AT91_DATAFLASH_CARD | |
| select HAVE_NAND_ATMEL_BUSWIDTH_16 | |
| help | |
| Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. | |
| <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> | |
| endif | |
| # ---------------------------------------------------------- | |
| if ARCH_AT91SAM9G10 | |
| comment "AT91SAM9G10 Board Type" | |
| config MACH_AT91SAM9G10EK | |
| bool "Atmel AT91SAM9G10-EK Evaluation Kit" | |
| select HAVE_AT91_DATAFLASH_CARD | |
| select HAVE_NAND_ATMEL_BUSWIDTH_16 | |
| help | |
| Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. | |
| <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> | |
| endif | |
| # ---------------------------------------------------------- | |
| if ARCH_AT91SAM9263 | |
| comment "AT91SAM9263 Board Type" | |
| config MACH_AT91SAM9263EK | |
| bool "Atmel AT91SAM9263-EK Evaluation Kit" | |
| select HAVE_AT91_DATAFLASH_CARD | |
| select HAVE_NAND_ATMEL_BUSWIDTH_16 | |
| help | |
| Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. | |
| <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> | |
| config MACH_USB_A9263 | |
| bool "CALAO USB-A9263" | |
| help | |
| Select this if you are using a Calao Systems USB-A9263. | |
| <http://www.calao-systems.com> | |
| config MACH_NEOCORE926 | |
| bool "Adeneo NEOCORE926" | |
| select HAVE_AT91_DATAFLASH_CARD | |
| help | |
| Select this if you are using the Adeneo Neocore 926 board. | |
| endif | |
| # ---------------------------------------------------------- | |
| if ARCH_AT91SAM9RL | |
| comment "AT91SAM9RL Board Type" | |
| config MACH_AT91SAM9RLEK | |
| bool "Atmel AT91SAM9RL-EK Evaluation Kit" | |
| help | |
| Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. | |
| endif | |
| # ---------------------------------------------------------- | |
| if ARCH_AT91SAM9G20 | |
| comment "AT91SAM9G20 Board Type" | |
| config MACH_AT91SAM9G20EK | |
| bool "Atmel AT91SAM9G20-EK Evaluation Kit" | |
| select HAVE_AT91_DATAFLASH_CARD | |
| select HAVE_NAND_ATMEL_BUSWIDTH_16 | |
| help | |
| Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit | |
| that embeds only one SD/MMC slot. | |
| config MACH_AT91SAM9G20EK_2MMC | |
| depends on MACH_AT91SAM9G20EK | |
| bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" | |
| select HAVE_NAND_ATMEL_BUSWIDTH_16 | |
| help | |
| Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit | |
| with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and | |
| onwards. | |
| config MACH_CPU9G20 | |
| bool "Eukrea CPU9G20 board" | |
| help | |
| Select this if you are using a Eukrea Electromatique's | |
| CPU9G20 Board <http://www.eukrea.com/> | |
| config MACH_PORTUXG20 | |
| bool "taskit PortuxG20" | |
| help | |
| Select this if you are using taskit's PortuxG20. | |
| <http://www.taskit.de/en/> | |
| config MACH_STAMP9G20 | |
| bool "taskit Stamp9G20 CPU module" | |
| help | |
| Select this if you are using taskit's Stamp9G20 CPU module on its | |
| evaluation board. | |
| <http://www.taskit.de/en/> | |
| config MACH_PCONTROL_G20 | |
| bool "PControl G20 CPU module" | |
| help | |
| Select this if you are using taskit's Stamp9G20 CPU module on this | |
| carrier board, beeing the decentralized unit of a building automation | |
| system; featuring nvram, eth-switch, iso-rs485, display, io | |
| endif | |
| if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20) | |
| comment "AT91SAM9260/AT91SAM9G20 boards" | |
| config MACH_SNAPPER_9260 | |
| bool "Bluewater Systems Snapper 9260/9G20 module" | |
| help | |
| Select this if you are using the Bluewater Systems Snapper 9260 or | |
| Snapper 9G20 modules. | |
| <http://www.bluewatersys.com/> | |
| endif | |
| # ---------------------------------------------------------- | |
| if ARCH_AT91SAM9G45 | |
| comment "AT91SAM9G45 Board Type" | |
| config MACH_AT91SAM9M10G45EK | |
| bool "Atmel AT91SAM9M10G45-EK Evaluation Kits" | |
| select HAVE_NAND_ATMEL_BUSWIDTH_16 | |
| help | |
| Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit. | |
| "ES" at the end of the name means that this board is an | |
| Engineering Sample. | |
| endif | |
| # ---------------------------------------------------------- | |
| if ARCH_AT91CAP9 | |
| comment "AT91CAP9 Board Type" | |
| config MACH_AT91CAP9ADK | |
| bool "Atmel AT91CAP9A-DK Evaluation Kit" | |
| select HAVE_AT91_DATAFLASH_CARD | |
| select HAVE_NAND_ATMEL_BUSWIDTH_16 | |
| help | |
| Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit. | |
| <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138> | |
| endif | |
| # ---------------------------------------------------------- | |
| if ARCH_AT572D940HF | |
| comment "AT572D940HF Board Type" | |
| config MACH_AT572D940HFEB | |
| bool "AT572D940HF-EK" | |
| depends on ARCH_AT572D940HF | |
| select HAVE_AT91_DATAFLASH_CARD | |
| select HAVE_NAND_ATMEL_BUSWIDTH_16 | |
| help | |
| Select this if you are using Atmel's AT572D940HF-EK evaluation kit. | |
| <http://www.atmel.com/products/diopsis/default.asp> | |
| endif | |
| # ---------------------------------------------------------- | |
| if ARCH_AT91X40 | |
| comment "AT91X40 Board Type" | |
| config MACH_AT91EB01 | |
| bool "Atmel AT91EB01 Evaluation Kit" | |
| help | |
| Select this if you are using Atmel's AT91EB01 Evaluation Kit. | |
| It is also a popular target for simulators such as GDB's | |
| ARM simulator (commonly known as the ARMulator) and the | |
| Skyeye simulator. | |
| endif | |
| # ---------------------------------------------------------- | |
| comment "AT91 Board Options" | |
| config MTD_AT91_DATAFLASH_CARD | |
| bool "Enable DataFlash Card support" | |
| depends on HAVE_AT91_DATAFLASH_CARD | |
| help | |
| Enable support for the DataFlash card. | |
| config MTD_NAND_ATMEL_BUSWIDTH_16 | |
| bool "Enable 16-bit data bus interface to NAND flash" | |
| depends on HAVE_NAND_ATMEL_BUSWIDTH_16 | |
| help | |
| On AT91SAM926x boards both types of NAND flash can be present | |
| (8 and 16 bit data bus width). | |
| # ---------------------------------------------------------- | |
| comment "AT91 Feature Selections" | |
| config AT91_PROGRAMMABLE_CLOCKS | |
| bool "Programmable Clocks" | |
| help | |
| Select this if you need to program one or more of the PCK0..PCK3 | |
| programmable clock outputs. | |
| config AT91_SLOW_CLOCK | |
| bool "Suspend-to-RAM disables main oscillator" | |
| depends on SUSPEND | |
| help | |
| Select this if you want Suspend-to-RAM to save the most power | |
| possible (without powering off the CPU) by disabling the PLLs | |
| and main oscillator so that only the 32 KiHz clock is available. | |
| When only that slow-clock is available, some peripherals lose | |
| functionality. Many can't issue wakeup events unless faster | |
| clocks are available. Some lose their operating state and | |
| need to be completely re-initialized. | |
| config AT91_TIMER_HZ | |
| int "Kernel HZ (jiffies per second)" | |
| range 32 1024 | |
| depends on ARCH_AT91 | |
| default "128" if ARCH_AT91RM9200 | |
| default "100" | |
| help | |
| On AT91rm9200 chips where you're using a system clock derived | |
| from the 32768 Hz hardware clock, this tick rate should divide | |
| it exactly: use a power-of-two value, such as 128 or 256, to | |
| reduce timing errors caused by rounding. | |
| On AT91sam926x chips, or otherwise when using a higher precision | |
| system clock (of at least several MHz), rounding is less of a | |
| problem so it can be safer to use a decimal values like 100. | |
| choice | |
| prompt "Select a UART for early kernel messages" | |
| config AT91_EARLY_DBGU | |
| bool "DBGU" | |
| config AT91_EARLY_USART0 | |
| bool "USART0" | |
| config AT91_EARLY_USART1 | |
| bool "USART1" | |
| config AT91_EARLY_USART2 | |
| bool "USART2" | |
| depends on ! ARCH_AT91X40 | |
| config AT91_EARLY_USART3 | |
| bool "USART3" | |
| depends on HAVE_AT91_USART3 | |
| config AT91_EARLY_USART4 | |
| bool "USART4" | |
| depends on HAVE_AT91_USART4 | |
| config AT91_EARLY_USART5 | |
| bool "USART5" | |
| depends on HAVE_AT91_USART5 | |
| endchoice | |
| endmenu | |
| endif |