| comment "Processor Type" | |
| # Select CPU types depending on the architecture selected. This selects | |
| # which CPUs we support in the kernel image, and the compiler instruction | |
| # optimiser behaviour. | |
| # ARM610 | |
| config CPU_ARM610 | |
| bool "Support ARM610 processor" if ARCH_RPC | |
| select CPU_32v3 | |
| select CPU_CACHE_V3 | |
| select CPU_CACHE_VIVT | |
| select CPU_CP15_MMU | |
| select CPU_COPY_V3 if MMU | |
| select CPU_TLB_V3 if MMU | |
| select CPU_PABRT_LEGACY | |
| help | |
| The ARM610 is the successor to the ARM3 processor | |
| and was produced by VLSI Technology Inc. | |
| Say Y if you want support for the ARM610 processor. | |
| Otherwise, say N. | |
| # ARM7TDMI | |
| config CPU_ARM7TDMI | |
| bool "Support ARM7TDMI processor" | |
| depends on !MMU | |
| select CPU_32v4T | |
| select CPU_ABRT_LV4T | |
| select CPU_PABRT_LEGACY | |
| select CPU_CACHE_V4 | |
| help | |
| A 32-bit RISC microprocessor based on the ARM7 processor core | |
| which has no memory control unit and cache. | |
| Say Y if you want support for the ARM7TDMI processor. | |
| Otherwise, say N. | |
| # ARM710 | |
| config CPU_ARM710 | |
| bool "Support ARM710 processor" if ARCH_RPC | |
| select CPU_32v3 | |
| select CPU_CACHE_V3 | |
| select CPU_CACHE_VIVT | |
| select CPU_CP15_MMU | |
| select CPU_COPY_V3 if MMU | |
| select CPU_TLB_V3 if MMU | |
| select CPU_PABRT_LEGACY | |
| help | |
| A 32-bit RISC microprocessor based on the ARM7 processor core | |
| designed by Advanced RISC Machines Ltd. The ARM710 is the | |
| successor to the ARM610 processor. It was released in | |
| July 1994 by VLSI Technology Inc. | |
| Say Y if you want support for the ARM710 processor. | |
| Otherwise, say N. | |
| # ARM720T | |
| config CPU_ARM720T | |
| bool "Support ARM720T processor" if ARCH_INTEGRATOR | |
| select CPU_32v4T | |
| select CPU_ABRT_LV4T | |
| select CPU_PABRT_LEGACY | |
| select CPU_CACHE_V4 | |
| select CPU_CACHE_VIVT | |
| select CPU_CP15_MMU | |
| select CPU_COPY_V4WT if MMU | |
| select CPU_TLB_V4WT if MMU | |
| help | |
| A 32-bit RISC processor with 8kByte Cache, Write Buffer and | |
| MMU built around an ARM7TDMI core. | |
| Say Y if you want support for the ARM720T processor. | |
| Otherwise, say N. | |
| # ARM740T | |
| config CPU_ARM740T | |
| bool "Support ARM740T processor" if ARCH_INTEGRATOR | |
| depends on !MMU | |
| select CPU_32v4T | |
| select CPU_ABRT_LV4T | |
| select CPU_PABRT_LEGACY | |
| select CPU_CACHE_V3 # although the core is v4t | |
| select CPU_CP15_MPU | |
| help | |
| A 32-bit RISC processor with 8KB cache or 4KB variants, | |
| write buffer and MPU(Protection Unit) built around | |
| an ARM7TDMI core. | |
| Say Y if you want support for the ARM740T processor. | |
| Otherwise, say N. | |
| # ARM9TDMI | |
| config CPU_ARM9TDMI | |
| bool "Support ARM9TDMI processor" | |
| depends on !MMU | |
| select CPU_32v4T | |
| select CPU_ABRT_NOMMU | |
| select CPU_PABRT_LEGACY | |
| select CPU_CACHE_V4 | |
| help | |
| A 32-bit RISC microprocessor based on the ARM9 processor core | |
| which has no memory control unit and cache. | |
| Say Y if you want support for the ARM9TDMI processor. | |
| Otherwise, say N. | |
| # ARM920T | |
| config CPU_ARM920T | |
| bool "Support ARM920T processor" if ARCH_INTEGRATOR | |
| select CPU_32v4T | |
| select CPU_ABRT_EV4T | |
| select CPU_PABRT_LEGACY | |
| select CPU_CACHE_V4WT | |
| select CPU_CACHE_VIVT | |
| select CPU_CP15_MMU | |
| select CPU_COPY_V4WB if MMU | |
| select CPU_TLB_V4WBI if MMU | |
| help | |
| The ARM920T is licensed to be produced by numerous vendors, | |
| and is used in the Cirrus EP93xx and the Samsung S3C2410. | |
| Say Y if you want support for the ARM920T processor. | |
| Otherwise, say N. | |
| # ARM922T | |
| config CPU_ARM922T | |
| bool "Support ARM922T processor" if ARCH_INTEGRATOR | |
| select CPU_32v4T | |
| select CPU_ABRT_EV4T | |
| select CPU_PABRT_LEGACY | |
| select CPU_CACHE_V4WT | |
| select CPU_CACHE_VIVT | |
| select CPU_CP15_MMU | |
| select CPU_COPY_V4WB if MMU | |
| select CPU_TLB_V4WBI if MMU | |
| help | |
| The ARM922T is a version of the ARM920T, but with smaller | |
| instruction and data caches. It is used in Altera's | |
| Excalibur XA device family and Micrel's KS8695 Centaur. | |
| Say Y if you want support for the ARM922T processor. | |
| Otherwise, say N. | |
| # ARM925T | |
| config CPU_ARM925T | |
| bool "Support ARM925T processor" if ARCH_OMAP1 | |
| select CPU_32v4T | |
| select CPU_ABRT_EV4T | |
| select CPU_PABRT_LEGACY | |
| select CPU_CACHE_V4WT | |
| select CPU_CACHE_VIVT | |
| select CPU_CP15_MMU | |
| select CPU_COPY_V4WB if MMU | |
| select CPU_TLB_V4WBI if MMU | |
| help | |
| The ARM925T is a mix between the ARM920T and ARM926T, but with | |
| different instruction and data caches. It is used in TI's OMAP | |
| device family. | |
| Say Y if you want support for the ARM925T processor. | |
| Otherwise, say N. | |
| # ARM926T | |
| config CPU_ARM926T | |
| bool "Support ARM926T processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB | |
| select CPU_32v5 | |
| select CPU_ABRT_EV5TJ | |
| select CPU_PABRT_LEGACY | |
| select CPU_CACHE_VIVT | |
| select CPU_CP15_MMU | |
| select CPU_COPY_V4WB if MMU | |
| select CPU_TLB_V4WBI if MMU | |
| help | |
| This is a variant of the ARM920. It has slightly different | |
| instruction sequences for cache and TLB operations. Curiously, | |
| there is no documentation on it at the ARM corporate website. | |
| Say Y if you want support for the ARM926T processor. | |
| Otherwise, say N. | |
| # FA526 | |
| config CPU_FA526 | |
| bool | |
| select CPU_32v4 | |
| select CPU_ABRT_EV4 | |
| select CPU_PABRT_LEGACY | |
| select CPU_CACHE_VIVT | |
| select CPU_CP15_MMU | |
| select CPU_CACHE_FA | |
| select CPU_COPY_FA if MMU | |
| select CPU_TLB_FA if MMU | |
| help | |
| The FA526 is a version of the ARMv4 compatible processor with | |
| Branch Target Buffer, Unified TLB and cache line size 16. | |
| Say Y if you want support for the FA526 processor. | |
| Otherwise, say N. | |
| # ARM940T | |
| config CPU_ARM940T | |
| bool "Support ARM940T processor" if ARCH_INTEGRATOR | |
| depends on !MMU | |
| select CPU_32v4T | |
| select CPU_ABRT_NOMMU | |
| select CPU_PABRT_LEGACY | |
| select CPU_CACHE_VIVT | |
| select CPU_CP15_MPU | |
| help | |
| ARM940T is a member of the ARM9TDMI family of general- | |
| purpose microprocessors with MPU and separate 4KB | |
| instruction and 4KB data cases, each with a 4-word line | |
| length. | |
| Say Y if you want support for the ARM940T processor. | |
| Otherwise, say N. | |
| # ARM946E-S | |
| config CPU_ARM946E | |
| bool "Support ARM946E-S processor" if ARCH_INTEGRATOR | |
| depends on !MMU | |
| select CPU_32v5 | |
| select CPU_ABRT_NOMMU | |
| select CPU_PABRT_LEGACY | |
| select CPU_CACHE_VIVT | |
| select CPU_CP15_MPU | |
| help | |
| ARM946E-S is a member of the ARM9E-S family of high- | |
| performance, 32-bit system-on-chip processor solutions. | |
| The TCM and ARMv5TE 32-bit instruction set is supported. | |
| Say Y if you want support for the ARM946E-S processor. | |
| Otherwise, say N. | |
| # ARM1020 - needs validating | |
| config CPU_ARM1020 | |
| bool "Support ARM1020T (rev 0) processor" if ARCH_INTEGRATOR | |
| select CPU_32v5 | |
| select CPU_ABRT_EV4T | |
| select CPU_PABRT_LEGACY | |
| select CPU_CACHE_V4WT | |
| select CPU_CACHE_VIVT | |
| select CPU_CP15_MMU | |
| select CPU_COPY_V4WB if MMU | |
| select CPU_TLB_V4WBI if MMU | |
| help | |
| The ARM1020 is the 32K cached version of the ARM10 processor, | |
| with an addition of a floating-point unit. | |
| Say Y if you want support for the ARM1020 processor. | |
| Otherwise, say N. | |
| # ARM1020E - needs validating | |
| config CPU_ARM1020E | |
| bool "Support ARM1020E processor" if ARCH_INTEGRATOR | |
| select CPU_32v5 | |
| select CPU_ABRT_EV4T | |
| select CPU_PABRT_LEGACY | |
| select CPU_CACHE_V4WT | |
| select CPU_CACHE_VIVT | |
| select CPU_CP15_MMU | |
| select CPU_COPY_V4WB if MMU | |
| select CPU_TLB_V4WBI if MMU | |
| depends on n | |
| # ARM1022E | |
| config CPU_ARM1022 | |
| bool "Support ARM1022E processor" if ARCH_INTEGRATOR | |
| select CPU_32v5 | |
| select CPU_ABRT_EV4T | |
| select CPU_PABRT_LEGACY | |
| select CPU_CACHE_VIVT | |
| select CPU_CP15_MMU | |
| select CPU_COPY_V4WB if MMU # can probably do better | |
| select CPU_TLB_V4WBI if MMU | |
| help | |
| The ARM1022E is an implementation of the ARMv5TE architecture | |
| based upon the ARM10 integer core with a 16KiB L1 Harvard cache, | |
| embedded trace macrocell, and a floating-point unit. | |
| Say Y if you want support for the ARM1022E processor. | |
| Otherwise, say N. | |
| # ARM1026EJ-S | |
| config CPU_ARM1026 | |
| bool "Support ARM1026EJ-S processor" if ARCH_INTEGRATOR | |
| select CPU_32v5 | |
| select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10 | |
| select CPU_PABRT_LEGACY | |
| select CPU_CACHE_VIVT | |
| select CPU_CP15_MMU | |
| select CPU_COPY_V4WB if MMU # can probably do better | |
| select CPU_TLB_V4WBI if MMU | |
| help | |
| The ARM1026EJ-S is an implementation of the ARMv5TEJ architecture | |
| based upon the ARM10 integer core. | |
| Say Y if you want support for the ARM1026EJ-S processor. | |
| Otherwise, say N. | |
| # SA110 | |
| config CPU_SA110 | |
| bool "Support StrongARM(R) SA-110 processor" if ARCH_RPC | |
| select CPU_32v3 if ARCH_RPC | |
| select CPU_32v4 if !ARCH_RPC | |
| select CPU_ABRT_EV4 | |
| select CPU_PABRT_LEGACY | |
| select CPU_CACHE_V4WB | |
| select CPU_CACHE_VIVT | |
| select CPU_CP15_MMU | |
| select CPU_COPY_V4WB if MMU | |
| select CPU_TLB_V4WB if MMU | |
| help | |
| The Intel StrongARM(R) SA-110 is a 32-bit microprocessor and | |
| is available at five speeds ranging from 100 MHz to 233 MHz. | |
| More information is available at | |
| <http://developer.intel.com/design/strong/sa110.htm>. | |
| Say Y if you want support for the SA-110 processor. | |
| Otherwise, say N. | |
| # SA1100 | |
| config CPU_SA1100 | |
| bool | |
| select CPU_32v4 | |
| select CPU_ABRT_EV4 | |
| select CPU_PABRT_LEGACY | |
| select CPU_CACHE_V4WB | |
| select CPU_CACHE_VIVT | |
| select CPU_CP15_MMU | |
| select CPU_TLB_V4WB if MMU | |
| # XScale | |
| config CPU_XSCALE | |
| bool | |
| select CPU_32v5 | |
| select CPU_ABRT_EV5T | |
| select CPU_PABRT_LEGACY | |
| select CPU_CACHE_VIVT | |
| select CPU_CP15_MMU | |
| select CPU_TLB_V4WBI if MMU | |
| # XScale Core Version 3 | |
| config CPU_XSC3 | |
| bool | |
| select CPU_32v5 | |
| select CPU_ABRT_EV5T | |
| select CPU_PABRT_LEGACY | |
| select CPU_CACHE_VIVT | |
| select CPU_CP15_MMU | |
| select CPU_TLB_V4WBI if MMU | |
| select IO_36 | |
| # Marvell PJ1 (Mohawk) | |
| config CPU_MOHAWK | |
| bool | |
| select CPU_32v5 | |
| select CPU_ABRT_EV5T | |
| select CPU_PABRT_LEGACY | |
| select CPU_CACHE_VIVT | |
| select CPU_CP15_MMU | |
| select CPU_TLB_V4WBI if MMU | |
| select CPU_COPY_V4WB if MMU | |
| # Feroceon | |
| config CPU_FEROCEON | |
| bool | |
| select CPU_32v5 | |
| select CPU_ABRT_EV5T | |
| select CPU_PABRT_LEGACY | |
| select CPU_CACHE_VIVT | |
| select CPU_CP15_MMU | |
| select CPU_COPY_FEROCEON if MMU | |
| select CPU_TLB_FEROCEON if MMU | |
| config CPU_FEROCEON_OLD_ID | |
| bool "Accept early Feroceon cores with an ARM926 ID" | |
| depends on CPU_FEROCEON && !CPU_ARM926T | |
| default y | |
| help | |
| This enables the usage of some old Feroceon cores | |
| for which the CPU ID is equal to the ARM926 ID. | |
| Relevant for Feroceon-1850 and early Feroceon-2850. | |
| # ARMv6 | |
| config CPU_V6 | |
| bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || ARCH_DOVE | |
| select CPU_32v6 | |
| select CPU_ABRT_EV6 | |
| select CPU_PABRT_V6 | |
| select CPU_CACHE_V6 | |
| select CPU_CACHE_VIPT | |
| select CPU_CP15_MMU | |
| select CPU_HAS_ASID if MMU | |
| select CPU_COPY_V6 if MMU | |
| select CPU_TLB_V6 if MMU | |
| # ARMv6k | |
| config CPU_32v6K | |
| bool "Support ARM V6K processor extensions" if !SMP | |
| depends on CPU_V6 || CPU_V7 | |
| default y if SMP && !(ARCH_MX3 || ARCH_OMAP2) | |
| help | |
| Say Y here if your ARMv6 processor supports the 'K' extension. | |
| This enables the kernel to use some instructions not present | |
| on previous processors, and as such a kernel build with this | |
| enabled will not boot on processors with do not support these | |
| instructions. | |
| # ARMv7 | |
| config CPU_V7 | |
| bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX | |
| select CPU_32v6K if !ARCH_OMAP2 | |
| select CPU_32v7 | |
| select CPU_ABRT_EV7 | |
| select CPU_PABRT_V7 | |
| select CPU_CACHE_V7 | |
| select CPU_CACHE_VIPT | |
| select CPU_CP15_MMU | |
| select CPU_HAS_ASID if MMU | |
| select CPU_COPY_V6 if MMU | |
| select CPU_TLB_V7 if MMU | |
| # Figure out what processor architecture version we should be using. | |
| # This defines the compiler instruction set which depends on the machine type. | |
| config CPU_32v3 | |
| bool | |
| select TLS_REG_EMUL if SMP || !MMU | |
| select NEEDS_SYSCALL_FOR_CMPXCHG if SMP | |
| config CPU_32v4 | |
| bool | |
| select TLS_REG_EMUL if SMP || !MMU | |
| select NEEDS_SYSCALL_FOR_CMPXCHG if SMP | |
| config CPU_32v4T | |
| bool | |
| select TLS_REG_EMUL if SMP || !MMU | |
| select NEEDS_SYSCALL_FOR_CMPXCHG if SMP | |
| config CPU_32v5 | |
| bool | |
| select TLS_REG_EMUL if SMP || !MMU | |
| select NEEDS_SYSCALL_FOR_CMPXCHG if SMP | |
| config CPU_32v6 | |
| bool | |
| select TLS_REG_EMUL if !CPU_32v6K && !MMU | |
| config CPU_32v7 | |
| bool | |
| # The abort model | |
| config CPU_ABRT_NOMMU | |
| bool | |
| config CPU_ABRT_EV4 | |
| bool | |
| config CPU_ABRT_EV4T | |
| bool | |
| config CPU_ABRT_LV4T | |
| bool | |
| config CPU_ABRT_EV5T | |
| bool | |
| config CPU_ABRT_EV5TJ | |
| bool | |
| config CPU_ABRT_EV6 | |
| bool | |
| config CPU_ABRT_EV7 | |
| bool | |
| config CPU_PABRT_LEGACY | |
| bool | |
| config CPU_PABRT_V6 | |
| bool | |
| config CPU_PABRT_V7 | |
| bool | |
| # The cache model | |
| config CPU_CACHE_V3 | |
| bool | |
| config CPU_CACHE_V4 | |
| bool | |
| config CPU_CACHE_V4WT | |
| bool | |
| config CPU_CACHE_V4WB | |
| bool | |
| config CPU_CACHE_V6 | |
| bool | |
| config CPU_CACHE_V7 | |
| bool | |
| config CPU_CACHE_VIVT | |
| bool | |
| config CPU_CACHE_VIPT | |
| bool | |
| config CPU_CACHE_FA | |
| bool | |
| if MMU | |
| # The copy-page model | |
| config CPU_COPY_V3 | |
| bool | |
| config CPU_COPY_V4WT | |
| bool | |
| config CPU_COPY_V4WB | |
| bool | |
| config CPU_COPY_FEROCEON | |
| bool | |
| config CPU_COPY_FA | |
| bool | |
| config CPU_COPY_V6 | |
| bool | |
| # This selects the TLB model | |
| config CPU_TLB_V3 | |
| bool | |
| help | |
| ARM Architecture Version 3 TLB. | |
| config CPU_TLB_V4WT | |
| bool | |
| help | |
| ARM Architecture Version 4 TLB with writethrough cache. | |
| config CPU_TLB_V4WB | |
| bool | |
| help | |
| ARM Architecture Version 4 TLB with writeback cache. | |
| config CPU_TLB_V4WBI | |
| bool | |
| help | |
| ARM Architecture Version 4 TLB with writeback cache and invalidate | |
| instruction cache entry. | |
| config CPU_TLB_FEROCEON | |
| bool | |
| help | |
| Feroceon TLB (v4wbi with non-outer-cachable page table walks). | |
| config CPU_TLB_FA | |
| bool | |
| help | |
| Faraday ARM FA526 architecture, unified TLB with writeback cache | |
| and invalidate instruction cache entry. Branch target buffer is | |
| also supported. | |
| config CPU_TLB_V6 | |
| bool | |
| config CPU_TLB_V7 | |
| bool | |
| config VERIFY_PERMISSION_FAULT | |
| bool | |
| endif | |
| config CPU_HAS_ASID | |
| bool | |
| help | |
| This indicates whether the CPU has the ASID register; used to | |
| tag TLB and possibly cache entries. | |
| config CPU_CP15 | |
| bool | |
| help | |
| Processor has the CP15 register. | |
| config CPU_CP15_MMU | |
| bool | |
| select CPU_CP15 | |
| help | |
| Processor has the CP15 register, which has MMU related registers. | |
| config CPU_CP15_MPU | |
| bool | |
| select CPU_CP15 | |
| help | |
| Processor has the CP15 register, which has MPU related registers. | |
| # | |
| # CPU supports 36-bit I/O | |
| # | |
| config IO_36 | |
| bool | |
| comment "Processor Features" | |
| config ARM_THUMB | |
| bool "Support Thumb user binaries" | |
| depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V7 || CPU_FEROCEON | |
| default y | |
| help | |
| Say Y if you want to include kernel support for running user space | |
| Thumb binaries. | |
| The Thumb instruction set is a compressed form of the standard ARM | |
| instruction set resulting in smaller binaries at the expense of | |
| slightly less efficient code. | |
| If you don't know what this all is, saying Y is a safe choice. | |
| config ARM_THUMBEE | |
| bool "Enable ThumbEE CPU extension" | |
| depends on CPU_V7 | |
| help | |
| Say Y here if you have a CPU with the ThumbEE extension and code to | |
| make use of it. Say N for code that can run on CPUs without ThumbEE. | |
| config CPU_BIG_ENDIAN | |
| bool "Build big-endian kernel" | |
| depends on ARCH_SUPPORTS_BIG_ENDIAN | |
| help | |
| Say Y if you plan on running a kernel in big-endian mode. | |
| Note that your board must be properly built and your board | |
| port must properly enable any big-endian related features | |
| of your chipset/board/processor. | |
| config CPU_ENDIAN_BE8 | |
| bool | |
| depends on CPU_BIG_ENDIAN | |
| default CPU_V6 || CPU_V7 | |
| help | |
| Support for the BE-8 (big-endian) mode on ARMv6 and ARMv7 processors. | |
| config CPU_ENDIAN_BE32 | |
| bool | |
| depends on CPU_BIG_ENDIAN | |
| default !CPU_ENDIAN_BE8 | |
| help | |
| Support for the BE-32 (big-endian) mode on pre-ARMv6 processors. | |
| config CPU_HIGH_VECTOR | |
| depends on !MMU && CPU_CP15 && !CPU_ARM740T | |
| bool "Select the High exception vector" | |
| help | |
| Say Y here to select high exception vector(0xFFFF0000~). | |
| The exception vector can be vary depending on the platform | |
| design in nommu mode. If your platform needs to select | |
| high exception vector, say Y. | |
| Otherwise or if you are unsure, say N, and the low exception | |
| vector (0x00000000~) will be used. | |
| config CPU_ICACHE_DISABLE | |
| bool "Disable I-Cache (I-bit)" | |
| depends on CPU_CP15 && !(CPU_ARM610 || CPU_ARM710 || CPU_ARM720T || CPU_ARM740T || CPU_XSCALE || CPU_XSC3) | |
| help | |
| Say Y here to disable the processor instruction cache. Unless | |
| you have a reason not to or are unsure, say N. | |
| config CPU_DCACHE_DISABLE | |
| bool "Disable D-Cache (C-bit)" | |
| depends on CPU_CP15 | |
| help | |
| Say Y here to disable the processor data cache. Unless | |
| you have a reason not to or are unsure, say N. | |
| config CPU_DCACHE_SIZE | |
| hex | |
| depends on CPU_ARM740T || CPU_ARM946E | |
| default 0x00001000 if CPU_ARM740T | |
| default 0x00002000 # default size for ARM946E-S | |
| help | |
| Some cores are synthesizable to have various sized cache. For | |
| ARM946E-S case, it can vary from 0KB to 1MB. | |
| To support such cache operations, it is efficient to know the size | |
| before compile time. | |
| If your SoC is configured to have a different size, define the value | |
| here with proper conditions. | |
| config CPU_DCACHE_WRITETHROUGH | |
| bool "Force write through D-cache" | |
| depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_FA526) && !CPU_DCACHE_DISABLE | |
| default y if CPU_ARM925T | |
| help | |
| Say Y here to use the data cache in writethrough mode. Unless you | |
| specifically require this or are unsure, say N. | |
| config CPU_CACHE_ROUND_ROBIN | |
| bool "Round robin I and D cache replacement algorithm" | |
| depends on (CPU_ARM926T || CPU_ARM946E || CPU_ARM1020) && (!CPU_ICACHE_DISABLE || !CPU_DCACHE_DISABLE) | |
| help | |
| Say Y here to use the predictable round-robin cache replacement | |
| policy. Unless you specifically require this or are unsure, say N. | |
| config CPU_BPREDICT_DISABLE | |
| bool "Disable branch prediction" | |
| depends on CPU_ARM1020 || CPU_V6 || CPU_MOHAWK || CPU_XSC3 || CPU_V7 || CPU_FA526 | |
| help | |
| Say Y here to disable branch prediction. If unsure, say N. | |
| config TLS_REG_EMUL | |
| bool | |
| help | |
| An SMP system using a pre-ARMv6 processor (there are apparently | |
| a few prototypes like that in existence) and therefore access to | |
| that required register must be emulated. | |
| config NEEDS_SYSCALL_FOR_CMPXCHG | |
| bool | |
| help | |
| SMP on a pre-ARMv6 processor? Well OK then. | |
| Forget about fast user space cmpxchg support. | |
| It is just not possible. | |
| config DMA_CACHE_RWFO | |
| bool "Enable read/write for ownership DMA cache maintenance" | |
| depends on CPU_V6 && SMP | |
| default y | |
| help | |
| The Snoop Control Unit on ARM11MPCore does not detect the | |
| cache maintenance operations and the dma_{map,unmap}_area() | |
| functions may leave stale cache entries on other CPUs. By | |
| enabling this option, Read or Write For Ownership in the ARMv6 | |
| DMA cache maintenance functions is performed. These LDR/STR | |
| instructions change the cache line state to shared or modified | |
| so that the cache operation has the desired effect. | |
| Note that the workaround is only valid on processors that do | |
| not perform speculative loads into the D-cache. For such | |
| processors, if cache maintenance operations are not broadcast | |
| in hardware, other workarounds are needed (e.g. cache | |
| maintenance broadcasting in software via FIQ). | |
| config OUTER_CACHE | |
| bool | |
| config OUTER_CACHE_SYNC | |
| bool | |
| help | |
| The outer cache has a outer_cache_fns.sync function pointer | |
| that can be used to drain the write buffer of the outer cache. | |
| config CACHE_FEROCEON_L2 | |
| bool "Enable the Feroceon L2 cache controller" | |
| depends on ARCH_KIRKWOOD || ARCH_MV78XX0 | |
| default y | |
| select OUTER_CACHE | |
| help | |
| This option enables the Feroceon L2 cache controller. | |
| config CACHE_FEROCEON_L2_WRITETHROUGH | |
| bool "Force Feroceon L2 cache write through" | |
| depends on CACHE_FEROCEON_L2 | |
| help | |
| Say Y here to use the Feroceon L2 cache in writethrough mode. | |
| Unless you specifically require this, say N for writeback mode. | |
| config CACHE_L2X0 | |
| bool "Enable the L2x0 outer cache controller" | |
| depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \ | |
| REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || \ | |
| ARCH_NOMADIK || ARCH_OMAP4 || ARCH_S5PV310 || ARCH_TEGRA || \ | |
| ARCH_U8500 || ARCH_VEXPRESS_CA9X4 | |
| default y | |
| select OUTER_CACHE | |
| select OUTER_CACHE_SYNC | |
| help | |
| This option enables the L2x0 PrimeCell. | |
| config CACHE_PL310 | |
| bool | |
| depends on CACHE_L2X0 | |
| default y if CPU_V7 && !CPU_V6 | |
| help | |
| This option enables optimisations for the PL310 cache | |
| controller. | |
| config CACHE_TAUROS2 | |
| bool "Enable the Tauros2 L2 cache controller" | |
| depends on (ARCH_DOVE || ARCH_MMP) | |
| default y | |
| select OUTER_CACHE | |
| help | |
| This option enables the Tauros2 L2 cache controller (as | |
| found on PJ1/PJ4). | |
| config CACHE_XSC3L2 | |
| bool "Enable the L2 cache on XScale3" | |
| depends on CPU_XSC3 | |
| default y | |
| select OUTER_CACHE | |
| help | |
| This option enables the L2 cache on XScale3. | |
| config ARM_L1_CACHE_SHIFT | |
| int | |
| default 6 if ARM_L1_CACHE_SHIFT_6 | |
| default 5 | |
| config ARM_DMA_MEM_BUFFERABLE | |
| bool "Use non-cacheable memory for DMA" if CPU_V6 && !CPU_V7 | |
| depends on !(MACH_REALVIEW_PB1176 || REALVIEW_EB_ARM11MP || \ | |
| MACH_REALVIEW_PB11MP) | |
| default y if CPU_V6 || CPU_V7 | |
| help | |
| Historically, the kernel has used strongly ordered mappings to | |
| provide DMA coherent memory. With the advent of ARMv7, mapping | |
| memory with differing types results in unpredictable behaviour, | |
| so on these CPUs, this option is forced on. | |
| Multiple mappings with differing attributes is also unpredictable | |
| on ARMv6 CPUs, but since they do not have aggressive speculative | |
| prefetch, no harm appears to occur. | |
| However, drivers may be missing the necessary barriers for ARMv6, | |
| and therefore turning this on may result in unpredictable driver | |
| behaviour. Therefore, we offer this as an option. | |
| You are recommended say 'Y' here and debug any affected drivers. | |
| config ARCH_HAS_BARRIERS | |
| bool | |
| help | |
| This option allows the use of custom mandatory barriers | |
| included via the mach/barriers.h file. |