Project import
diff --git a/Makefile b/Makefile
new file mode 100644
index 0000000..ad8cf49
--- /dev/null
+++ b/Makefile
@@ -0,0 +1,149 @@
+#
+# Copyright (c) 2010-2011 Nest, Inc.
+# All rights reserved.
+#
+# This document is the property of Nest. It is considered
+# confidential and proprietary information.
+#
+# This document may not be reproduced or transmitted in any form,
+# in whole or in part, without the express written permission of
+# Nest.
+#
+# Description:
+# stressapptest is a userspace test, primarily composed of
+# threads doing memory copies and directIO disk read/write.
+# It allocates a large block of memory (typically 85% of the
+# total memory on the machine), and each thread will choose
+# randomized blocks of memory to copy, or to write to disk.
+#
+
+
+include pre.mak
+
+PackageRoot := .
+
+PackageName := stressapptest
+
+PackageExtension := tar.gz
+PackageSeparator := -
+
+PackagePatchArgs := -p1
+
+PackageArchive := $(PackageName).$(PackageExtension)
+PackageSourceDir := $(PackageName)$(PackageSeparator)$(PackageVersion)/
+
+PackageBuildMakefile = $(call GenerateBuildPaths,Makefile)
+
+LicenseSourceFile := $(PackageSourceDir)/COPYING
+
+CleanPaths += $(PackageLicenseFile)
+
+SOURCEDIRS = $(PackageSourceDir)
+$(PackageSourceDir)_RULE_TARGET = $(BuildDirectory)/configure
+
+all: $(PackageDefaultGoal)
+
+# Generate the package license contents.
+
+$(LicenseSourceFile): $(BuildDirectory)/source
+
+$(PackageLicenseFile): $(LicenseSourceFile)
+ $(copy-result)
+
+# Extract the source from the archive and apply patches, if any.
+
+$(PackageSourceDir): $(PackageArchive) $(PackagePatchPaths)
+ $(expand-and-patch-package)
+
+# Prepare the sources.
+
+$(BuildDirectory)/source: | $(PackageSourceDir)
+ $(Verbose)touch $@
+
+# Patch the sources, if necessary.
+
+$(BuildDirectory)/patch: $(BuildDirectory)/source
+ $(Verbose)touch $@
+
+# Generate the package build makefile.
+
+# Configure the source for building.
+
+$(BuildDirectory)/configure: $(BuildDirectory)/source | $(PackageSourceDir) $(BuildDirectory) $(ResultDirectory)
+ $(Verbose)cd $(BuildDirectory) && \
+ $(CURDIR)/$(PackageSourceDir)/configure \
+ INSTALL="$(INSTALL) $(INSTALLFLAGS)" \
+ CC="$(CC) $(CPPOPTFLAGS)" CXX="$(CXX) $(CPPOPTFLAGS)" AR=$(AR) NM=$(NM) RANLIB=$(RANLIB) STRIP=$(STRIP) \
+ CPPFLAGS="$(call ToolGenerateIncludeArgument,$(LinuxIncludePath))" \
+ DBUS_CFLAGS="$(call ToolGenerateIncludeArgument,$(DbusIncludePaths))" \
+ DBUS_LIBS="$(call GenerateLibraryArgument,$(DbusLibraryPath))" \
+ GLIB_CFLAGS="$(call ToolGenerateIncludeArgument,$(GlibIncludePaths))" \
+ GLIB_LIBS="$(call GenerateLibraryArgument,$(GlibLibraryPath))" \
+ UDEV_CFLAGS="$(call ToolGenerateIncludeArgument,$(UdevIncludePaths))" \
+ UDEV_LIBS="$(call GenerateLibraryArgument,$(UdevLibraryPath))" \
+ --build=$(HostTuple) \
+ --host=$(TargetTuple) \
+ --prefix=/usr \
+ --mandir=/usr/share/man \
+ --sysconfdir=/etc \
+ --localstatedir=/var \
+ --disable-silent-rules \
+ --disable-option-checking \
+ --disable-dependency-tracking \
+ --enable-shared \
+ --enable-fast-install \
+ --enable-debug \
+ --disable-cdmamodem \
+ --disable-isimodem \
+ --disable-qmimodem \
+ --disable-bluetooth \
+ --disable-provision
+ $(Verbose)touch $@
+
+# Build the source.
+#
+# We have to unset MAKEFLAGS since they confuse the package build otherwise.
+
+.PHONY: build
+$(BuildDirectory)/build: $(BuildDirectory)/configure
+ $(Verbose)unset MAKEFLAGS && \
+ $(MAKE) $(JOBSFLAG) -C $(BuildDirectory) \
+ all
+ $(Verbose)touch $@
+
+# Stage the build to a temporary installation area.
+#
+# We have to unset MAKEFLAGS since they confuse the package build otherwise.
+#
+# We explictly remove plug-in '*.la' files because some packages that
+# depend on these libraries use libtool. If libtool finds a '*.la'
+# file for a library, it uses the value of 'libdir=<dir>' it finds. In
+# our case, since '--prefix=/usr' this value is '/usr/lib'. It then
+# resolves '-lfoo' to '/usr/lib/libfoo.so'. In a cross-compilation
+# environment, this is likely to be neither the right architecture nor
+# the right version to link against. In short, we lose.
+#
+# We could also handle this by removing DESTDIR and setting the prefix
+# to $(ResultDirectory); however, that results in libtool hard-coding
+# $(ResultDirectory) as the RPATH in the linked executables which is
+# NOT what we want either. We lose again.
+#
+# By removing the '*.la' file, we win by ensuring neither a misdirected
+# link nor an RPATH.
+
+$(BuildDirectory)/stage: $(BuildDirectory)/build | $(ResultDirectory)
+ $(Verbose)unset MAKEFLAGS && \
+ $(MAKE) $(JOBSFLAG) -C $(BuildDirectory) \
+ DESTDIR=$(ResultDirectory) \
+ install
+ $(Verbose)touch $@
+
+.PHONY: stage
+stage: $(BuildDirectory)/stage
+
+clean:
+ $(Verbose)$(RM) $(RMFLAGS) -r $(PackageSourceDir)
+ $(Verbose)$(RM) $(RMFLAGS) -r $(BuildDirectory)
+ $(Verbose)$(RM) $(RMFLAGS) -r $(ResultDirectory)
+
+include post.mak
diff --git a/stressapptest.patches/stressapptest-50.patch b/stressapptest.patches/stressapptest-50.patch
new file mode 100644
index 0000000..2a83f4d
--- /dev/null
+++ b/stressapptest.patches/stressapptest-50.patch
@@ -0,0 +1,13 @@
+diff -Naur a/configure b/configure
+--- a/configure 2014-08-04 13:22:19.000000000 -0700
++++ b/configure 2016-06-13 16:01:53.318937779 -0700
+@@ -2475,7 +2475,7 @@
+ $as_echo "#define STRESSAPPTEST_CPU_PPC /**/" >>confdefs.h
+
+ ;; #(
+- *armv7a*) :
++ *arm*) :
+
+
+ $as_echo "#define STRESSAPPTEST_CPU_ARMV7A /**/" >>confdefs.h
+
diff --git a/stressapptest.tar.gz b/stressapptest.tar.gz
new file mode 100644
index 0000000..7f3c30d
--- /dev/null
+++ b/stressapptest.tar.gz
Binary files differ
diff --git a/stressapptest.url b/stressapptest.url
new file mode 100644
index 0000000..40346ce
--- /dev/null
+++ b/stressapptest.url
@@ -0,0 +1 @@
+https://github.com/stressapptest/stressapptest
diff --git a/stressapptest.version b/stressapptest.version
new file mode 100644
index 0000000..1f7391f
--- /dev/null
+++ b/stressapptest.version
@@ -0,0 +1 @@
+master