blob: 9cf816c89a627b32230f5b03d00c2e5ba3b01069 [file] [log] [blame] [edit]
/*
* emif4.c
*
* AM33XX emif4 configuration file
*
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/cpu.h>
#include <asm/arch/ddr_defs.h>
#include <asm/arch/hardware.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
#include <asm/emif.h>
DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
{
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
sdram_init();
#endif
/* dram_init must store complete ramsize in gd->ram_size */
gd->ram_size = get_ram_size(
(void *)CONFIG_SYS_SDRAM_BASE,
CONFIG_MAX_RAM_BANK_SIZE);
return 0;
}
void dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_dram[0].size = gd->ram_size;
}
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
#ifdef CONFIG_TI81XX
static struct dmm_lisa_map_regs *hw_lisa_map_regs =
(struct dmm_lisa_map_regs *)DMM_BASE;
#endif
#ifndef CONFIG_TI816X
static struct vtp_reg *vtpreg[2] = {
(struct vtp_reg *)VTP0_CTRL_ADDR,
(struct vtp_reg *)VTP1_CTRL_ADDR};
#endif
#ifdef CONFIG_AM33XX
static struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR;
#endif
#ifdef CONFIG_AM43XX
static struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR;
static struct cm_device_inst *cm_device =
(struct cm_device_inst *)CM_DEVICE_INST;
#endif
#ifdef CONFIG_TI81XX
void config_dmm(const struct dmm_lisa_map_regs *regs)
{
enable_dmm_clocks();
writel(0, &hw_lisa_map_regs->dmm_lisa_map_3);
writel(0, &hw_lisa_map_regs->dmm_lisa_map_2);
writel(0, &hw_lisa_map_regs->dmm_lisa_map_1);
writel(0, &hw_lisa_map_regs->dmm_lisa_map_0);
writel(regs->dmm_lisa_map_3, &hw_lisa_map_regs->dmm_lisa_map_3);
writel(regs->dmm_lisa_map_2, &hw_lisa_map_regs->dmm_lisa_map_2);
writel(regs->dmm_lisa_map_1, &hw_lisa_map_regs->dmm_lisa_map_1);
writel(regs->dmm_lisa_map_0, &hw_lisa_map_regs->dmm_lisa_map_0);
}
#endif
#ifndef CONFIG_TI816X
static void config_vtp(int nr)
{
writel(readl(&vtpreg[nr]->vtp0ctrlreg) | VTP_CTRL_ENABLE,
&vtpreg[nr]->vtp0ctrlreg);
writel(readl(&vtpreg[nr]->vtp0ctrlreg) & (~VTP_CTRL_START_EN),
&vtpreg[nr]->vtp0ctrlreg);
writel(readl(&vtpreg[nr]->vtp0ctrlreg) | VTP_CTRL_START_EN,
&vtpreg[nr]->vtp0ctrlreg);
/* Poll for READY */
while ((readl(&vtpreg[nr]->vtp0ctrlreg) & VTP_CTRL_READY) !=
VTP_CTRL_READY)
;
}
#endif
void __weak ddr_pll_config(unsigned int ddrpll_m)
{
}
void config_ddr(unsigned int pll, const struct ctrl_ioregs *ioregs,
const struct ddr_data *data, const struct cmd_control *ctrl,
const struct emif_regs *regs, int nr)
{
ddr_pll_config(pll);
#ifndef CONFIG_TI816X
config_vtp(nr);
#endif
config_cmd_ctrl(ctrl, nr);
config_ddr_data(data, nr);
#ifdef CONFIG_AM33XX
config_io_ctrl(ioregs);
/* Set CKE to be controlled by EMIF/DDR PHY */
writel(DDR_CKE_CTRL_NORMAL, &ddrctrl->ddrckectrl);
#endif
#ifdef CONFIG_AM43XX
writel(readl(&cm_device->cm_dll_ctrl) & ~0x1, &cm_device->cm_dll_ctrl);
while ((readl(&cm_device->cm_dll_ctrl) & CM_DLL_READYST) == 0)
;
config_io_ctrl(ioregs);
/* Set CKE to be controlled by EMIF/DDR PHY */
writel(DDR_CKE_CTRL_NORMAL, &ddrctrl->ddrckectrl);
/* Allow EMIF to control DDR_RESET */
writel(0x00000000, &ddrctrl->ddrioctrl);
#endif
/* Program EMIF instance */
config_ddr_phy(regs, nr);
set_sdram_timings(regs, nr);
if (get_emif_rev(EMIF1_BASE) == EMIF_4D5)
config_sdram_emif4d5(regs, nr);
else
config_sdram(regs, nr);
}
#endif