blob: bc4283d2f13b551cb747d796794286eabbd83027 [file] [log] [blame] [edit]
menu "MIPS architecture"
depends on MIPS
config SYS_ARCH
default "mips"
config SYS_CPU
default "mips32" if CPU_MIPS32_R1 || CPU_MIPS32_R2
default "mips64" if CPU_MIPS64_R1 || CPU_MIPS64_R2
config USE_PRIVATE_LIBGCC
default y
choice
prompt "Target select"
config TARGET_QEMU_MIPS
bool "Support qemu-mips"
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_LITTLE_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
select SUPPORTS_CPU_MIPS64_R1
select SUPPORTS_CPU_MIPS64_R2
config TARGET_MALTA
bool "Support malta"
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_LITTLE_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
select SWAP_IO_SPACE
config TARGET_VCT
bool "Support vct"
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
select SYS_MIPS_CACHE_INIT_RAM_LOAD
config TARGET_DBAU1X00
bool "Support dbau1x00"
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_LITTLE_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
select SYS_MIPS_CACHE_INIT_RAM_LOAD
config TARGET_PB1X00
bool "Support pb1x00"
select SUPPORTS_LITTLE_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
select SYS_MIPS_CACHE_INIT_RAM_LOAD
endchoice
source "board/dbau1x00/Kconfig"
source "board/imgtec/malta/Kconfig"
source "board/micronas/vct/Kconfig"
source "board/pb1x00/Kconfig"
source "board/qemu-mips/Kconfig"
if MIPS
choice
prompt "Endianness selection"
help
Some MIPS boards can be configured for either little or big endian
byte order. These modes require different U-Boot images. In general there
is one preferred byteorder for a particular system but some systems are
just as commonly used in the one or the other endianness.
config SYS_BIG_ENDIAN
bool "Big endian"
depends on SUPPORTS_BIG_ENDIAN
config SYS_LITTLE_ENDIAN
bool "Little endian"
depends on SUPPORTS_LITTLE_ENDIAN
endchoice
choice
prompt "CPU selection"
default CPU_MIPS32_R2
config CPU_MIPS32_R1
bool "MIPS32 Release 1"
depends on SUPPORTS_CPU_MIPS32_R1
select 32BIT
help
Choose this option to build an U-Boot for release 1 or later of the
MIPS32 architecture.
config CPU_MIPS32_R2
bool "MIPS32 Release 2"
depends on SUPPORTS_CPU_MIPS32_R2
select 32BIT
help
Choose this option to build an U-Boot for release 2 or later of the
MIPS32 architecture.
config CPU_MIPS64_R1
bool "MIPS64 Release 1"
depends on SUPPORTS_CPU_MIPS64_R1
select 64BIT
help
Choose this option to build a kernel for release 1 or later of the
MIPS64 architecture.
config CPU_MIPS64_R2
bool "MIPS64 Release 2"
depends on SUPPORTS_CPU_MIPS64_R2
select 64BIT
help
Choose this option to build a kernel for release 2 or later of the
MIPS64 architecture.
endchoice
menu "OS boot interface"
config MIPS_BOOT_CMDLINE_LEGACY
bool "Hand over legacy command line to Linux kernel"
default y
help
Enable this option if you want U-Boot to hand over the Yamon-style
command line to the kernel. All bootargs will be prepared as argc/argv
compatible list. The argument count (argc) is stored in register $a0.
The address of the argument list (argv) is stored in register $a1.
config MIPS_BOOT_ENV_LEGACY
bool "Hand over legacy environment to Linux kernel"
default y
help
Enable this option if you want U-Boot to hand over the Yamon-style
environment to the kernel. Information like memory size, initrd
address and size will be prepared as zero-terminated key/value list.
The address of the enviroment is stored in register $a2.
config MIPS_BOOT_FDT
bool "Hand over a flattened device tree to Linux kernel (INCOMPLETE)"
default n
help
Enable this option if you want U-Boot to hand over a flattened
device tree to the kernel.
Note: the final hand over to the kernel is not yet implemented. After
the community agreed on the MIPS boot interface for device trees,
the corresponding code will be added.
endmenu
config SUPPORTS_BIG_ENDIAN
bool
config SUPPORTS_LITTLE_ENDIAN
bool
config SUPPORTS_CPU_MIPS32_R1
bool
config SUPPORTS_CPU_MIPS32_R2
bool
config SUPPORTS_CPU_MIPS64_R1
bool
config SUPPORTS_CPU_MIPS64_R2
bool
config CPU_MIPS32
bool
default y if CPU_MIPS32_R1 || CPU_MIPS32_R2
config CPU_MIPS64
bool
default y if CPU_MIPS64_R1 || CPU_MIPS64_R2
config 32BIT
bool
config 64BIT
bool
config SWAP_IO_SPACE
bool
config SYS_MIPS_CACHE_INIT_RAM_LOAD
bool
endif
endmenu