| /* |
| * Definitions for API from sdio common code (bcmsdh) to individual |
| * host controller drivers. |
| * |
| * Copyright (C) 1999-2016, Broadcom Corporation |
| * |
| * Unless you and Broadcom execute a separate written software license |
| * agreement governing use of this software, this software is licensed to you |
| * under the terms of the GNU General Public License version 2 (the "GPL"), |
| * available at http://www.broadcom.com/licenses/GPLv2.php, with the |
| * following added to such license: |
| * |
| * As a special exception, the copyright holders of this software give you |
| * permission to link this software with independent modules, and to copy and |
| * distribute the resulting executable under terms of your choice, provided that |
| * you also meet, for each linked independent module, the terms and conditions of |
| * the license of that module. An independent module is a module which is not |
| * derived from this software. The special exception does not apply to any |
| * modifications of the software. |
| * |
| * Notwithstanding the above, under no circumstances may you combine this |
| * software in any way with any other Broadcom software provided under a license |
| * other than the GPL, without Broadcom's express prior written consent. |
| * |
| * $Id: bcmsdbus.h 408158 2013-06-17 22:15:35Z $ |
| */ |
| |
| #ifndef _sdio_api_h_ |
| #define _sdio_api_h_ |
| |
| |
| #define SDIOH_API_RC_SUCCESS (0x00) |
| #define SDIOH_API_RC_FAIL (0x01) |
| #define SDIOH_API_SUCCESS(status) (status == 0) |
| |
| #define SDIOH_READ 0 /* Read request */ |
| #define SDIOH_WRITE 1 /* Write request */ |
| |
| #define SDIOH_DATA_FIX 0 /* Fixed addressing */ |
| #define SDIOH_DATA_INC 1 /* Incremental addressing */ |
| |
| #define SDIOH_CMD_TYPE_NORMAL 0 /* Normal command */ |
| #define SDIOH_CMD_TYPE_APPEND 1 /* Append command */ |
| #define SDIOH_CMD_TYPE_CUTTHRU 2 /* Cut-through command */ |
| |
| #define SDIOH_DATA_PIO 0 /* PIO mode */ |
| #define SDIOH_DATA_DMA 1 /* DMA mode */ |
| |
| /* Max number of glommed pkts */ |
| #ifdef CUSTOM_MAX_TXGLOM_SIZE |
| #define SDPCM_MAXGLOM_SIZE CUSTOM_MAX_TXGLOM_SIZE |
| #else |
| #define SDPCM_MAXGLOM_SIZE 40 |
| #endif /* CUSTOM_MAX_TXGLOM_SIZE */ |
| |
| #define SDPCM_TXGLOM_CPY 0 /* SDIO 2.0 should use copy mode */ |
| #define SDPCM_TXGLOM_MDESC 1 /* SDIO 3.0 should use multi-desc mode */ |
| |
| #ifdef CUSTOM_DEF_TXGLOM_SIZE |
| #define SDPCM_DEFGLOM_SIZE CUSTOM_DEF_TXGLOM_SIZE |
| #else |
| #define SDPCM_DEFGLOM_SIZE SDPCM_MAXGLOM_SIZE |
| #endif /* CUSTOM_DEF_TXGLOM_SIZE */ |
| |
| #if SDPCM_DEFGLOM_SIZE > SDPCM_MAXGLOM_SIZE |
| #warning "SDPCM_DEFGLOM_SIZE cannot be higher than SDPCM_MAXGLOM_SIZE!!" |
| #undef SDPCM_DEFGLOM_SIZE |
| #define SDPCM_DEFGLOM_SIZE SDPCM_MAXGLOM_SIZE |
| #endif |
| |
| typedef int SDIOH_API_RC; |
| |
| /* SDio Host structure */ |
| typedef struct sdioh_info sdioh_info_t; |
| |
| /* callback function, taking one arg */ |
| typedef void (*sdioh_cb_fn_t)(void *); |
| |
| extern SDIOH_API_RC sdioh_interrupt_register(sdioh_info_t *si, sdioh_cb_fn_t fn, void *argh); |
| extern SDIOH_API_RC sdioh_interrupt_deregister(sdioh_info_t *si); |
| |
| /* query whether SD interrupt is enabled or not */ |
| extern SDIOH_API_RC sdioh_interrupt_query(sdioh_info_t *si, bool *onoff); |
| |
| /* enable or disable SD interrupt */ |
| extern SDIOH_API_RC sdioh_interrupt_set(sdioh_info_t *si, bool enable_disable); |
| |
| #if defined(DHD_DEBUG) |
| extern bool sdioh_interrupt_pending(sdioh_info_t *si); |
| #endif |
| |
| /* read or write one byte using cmd52 */ |
| extern SDIOH_API_RC sdioh_request_byte(sdioh_info_t *si, uint rw, uint fnc, uint addr, uint8 *byte); |
| |
| /* read or write 2/4 bytes using cmd53 */ |
| extern SDIOH_API_RC sdioh_request_word(sdioh_info_t *si, uint cmd_type, uint rw, uint fnc, |
| uint addr, uint32 *word, uint nbyte); |
| |
| /* read or write any buffer using cmd53 */ |
| extern SDIOH_API_RC sdioh_request_buffer(sdioh_info_t *si, uint pio_dma, uint fix_inc, |
| uint rw, uint fnc_num, uint32 addr, uint regwidth, uint32 buflen, uint8 *buffer, |
| void *pkt); |
| |
| /* get cis data */ |
| extern SDIOH_API_RC sdioh_cis_read(sdioh_info_t *si, uint fuc, uint8 *cis, uint32 length); |
| |
| extern SDIOH_API_RC sdioh_cfg_read(sdioh_info_t *si, uint fuc, uint32 addr, uint8 *data); |
| extern SDIOH_API_RC sdioh_cfg_write(sdioh_info_t *si, uint fuc, uint32 addr, uint8 *data); |
| |
| /* query number of io functions */ |
| extern uint sdioh_query_iofnum(sdioh_info_t *si); |
| |
| /* handle iovars */ |
| extern int sdioh_iovar_op(sdioh_info_t *si, const char *name, |
| void *params, int plen, void *arg, int len, bool set); |
| |
| /* Issue abort to the specified function and clear controller as needed */ |
| extern int sdioh_abort(sdioh_info_t *si, uint fnc); |
| |
| /* Start and Stop SDIO without re-enumerating the SD card. */ |
| extern int sdioh_start(sdioh_info_t *si, int stage); |
| extern int sdioh_stop(sdioh_info_t *si); |
| |
| /* Wait system lock free */ |
| extern int sdioh_waitlockfree(sdioh_info_t *si); |
| |
| /* Reset and re-initialize the device */ |
| extern int sdioh_sdio_reset(sdioh_info_t *si); |
| |
| |
| |
| #if defined(BCMSDIOH_STD) |
| #define SDIOH_SLEEP_ENABLED |
| #endif |
| extern SDIOH_API_RC sdioh_sleep(sdioh_info_t *si, bool enab); |
| |
| /* GPIO support */ |
| extern SDIOH_API_RC sdioh_gpio_init(sdioh_info_t *sd); |
| extern bool sdioh_gpioin(sdioh_info_t *sd, uint32 gpio); |
| extern SDIOH_API_RC sdioh_gpioouten(sdioh_info_t *sd, uint32 gpio); |
| extern SDIOH_API_RC sdioh_gpioout(sdioh_info_t *sd, uint32 gpio, bool enab); |
| |
| #endif /* _sdio_api_h_ */ |