| menuconfig RT2X00 | |
| tristate "Ralink driver support" | |
| depends on MAC80211 | |
| ---help--- | |
| This will enable the support for the Ralink drivers, | |
| developed in the rt2x00 project <http://rt2x00.serialmonkey.com>. | |
| These drivers make use of the mac80211 stack. | |
| When building one of the individual drivers, the rt2x00 library | |
| will also be created. That library (when the driver is built as | |
| a module) will be called rt2x00lib. | |
| Additionally PCI and USB libraries will also be build depending | |
| on the types of drivers being selected, these libraries will be | |
| called rt2x00pci and rt2x00usb. | |
| if RT2X00 | |
| config RT2400PCI | |
| tristate "Ralink rt2400 (PCI/PCMCIA) support" | |
| depends on PCI | |
| select RT2X00_LIB_PCI | |
| select EEPROM_93CX6 | |
| ---help--- | |
| This adds support for rt2400 wireless chipset family. | |
| Supported chips: RT2460. | |
| When compiled as a module, this driver will be called rt2400pci. | |
| config RT2500PCI | |
| tristate "Ralink rt2500 (PCI/PCMCIA) support" | |
| depends on PCI | |
| select RT2X00_LIB_PCI | |
| select EEPROM_93CX6 | |
| ---help--- | |
| This adds support for rt2500 wireless chipset family. | |
| Supported chips: RT2560. | |
| When compiled as a module, this driver will be called rt2500pci. | |
| config RT61PCI | |
| tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support" | |
| depends on PCI | |
| select RT2X00_LIB_PCI | |
| select RT2X00_LIB_FIRMWARE | |
| select RT2X00_LIB_CRYPTO | |
| select CRC_ITU_T | |
| select EEPROM_93CX6 | |
| ---help--- | |
| This adds support for rt2501 wireless chipset family. | |
| Supported chips: RT2561, RT2561S & RT2661. | |
| When compiled as a module, this driver will be called rt61pci. | |
| config RT2800PCI_PCI | |
| boolean | |
| depends on PCI | |
| default y | |
| config RT2800PCI_SOC | |
| boolean | |
| depends on RALINK_RT288X || RALINK_RT305X | |
| default y | |
| config RT2800PCI | |
| tristate "Ralink rt28xx/rt30xx/rt35xx (PCI/PCIe/PCMCIA) support (EXPERIMENTAL)" | |
| depends on (RT2800PCI_PCI || RT2800PCI_SOC) && EXPERIMENTAL | |
| select RT2800_LIB | |
| select RT2X00_LIB_PCI if RT2800PCI_PCI | |
| select RT2X00_LIB_SOC if RT2800PCI_SOC | |
| select RT2X00_LIB_HT | |
| select RT2X00_LIB_FIRMWARE | |
| select RT2X00_LIB_CRYPTO | |
| select CRC_CCITT | |
| select EEPROM_93CX6 | |
| ---help--- | |
| This adds support for rt2800/rt3000/rt3500 wireless chipset family. | |
| Supported chips: RT2760, RT2790, RT2860, RT2880, RT2890 & RT3052 | |
| This driver is non-functional at the moment and is intended for | |
| developers. | |
| When compiled as a module, this driver will be called "rt2800pci.ko". | |
| if RT2800PCI | |
| config RT2800PCI_RT30XX | |
| bool "rt2800pci - Include support for rt30xx (PCI/PCIe/PCMCIA) devices" | |
| default y | |
| ---help--- | |
| This adds support for rt30xx wireless chipset family to the | |
| rt2800pci driver. | |
| Supported chips: RT3090, RT3091 & RT3092 | |
| Support for these devices is non-functional at the moment and is | |
| intended for testers and developers. | |
| config RT2800PCI_RT35XX | |
| bool "rt2800pci - Include support for rt35xx (PCI/PCIe/PCMCIA) devices" | |
| default n | |
| ---help--- | |
| This adds support for rt35xx wireless chipset family to the | |
| rt2800pci driver. | |
| Supported chips: RT3060, RT3062, RT3562, RT3592 | |
| Support for these devices is non-functional at the moment and is | |
| intended for testers and developers. | |
| endif | |
| config RT2500USB | |
| tristate "Ralink rt2500 (USB) support" | |
| depends on USB | |
| select RT2X00_LIB_USB | |
| select RT2X00_LIB_CRYPTO | |
| ---help--- | |
| This adds support for rt2500 wireless chipset family. | |
| Supported chips: RT2571 & RT2572. | |
| When compiled as a module, this driver will be called rt2500usb. | |
| config RT73USB | |
| tristate "Ralink rt2501/rt73 (USB) support" | |
| depends on USB | |
| select RT2X00_LIB_USB | |
| select RT2X00_LIB_FIRMWARE | |
| select RT2X00_LIB_CRYPTO | |
| select CRC_ITU_T | |
| ---help--- | |
| This adds support for rt2501 wireless chipset family. | |
| Supported chips: RT2571W, RT2573 & RT2671. | |
| When compiled as a module, this driver will be called rt73usb. | |
| config RT2800USB | |
| tristate "Ralink rt2800 (USB) support (EXPERIMENTAL)" | |
| depends on USB && EXPERIMENTAL | |
| select RT2800_LIB | |
| select RT2X00_LIB_USB | |
| select RT2X00_LIB_HT | |
| select RT2X00_LIB_FIRMWARE | |
| select RT2X00_LIB_CRYPTO | |
| select CRC_CCITT | |
| ---help--- | |
| This adds experimental support for rt2800 wireless chipset family. | |
| Supported chips: RT2770, RT2870 & RT3070. | |
| Known issues: | |
| - support for RT2870 chips doesn't work with 802.11n APs yet | |
| - support for RT3070 chips is non-functional at the moment | |
| When compiled as a module, this driver will be called "rt2800usb.ko". | |
| if RT2800USB | |
| config RT2800USB_RT30XX | |
| bool "rt2800usb - Include support for rt30xx (USB) devices" | |
| default y | |
| ---help--- | |
| This adds support for rt30xx wireless chipset family to the | |
| rt2800usb driver. | |
| Supported chips: RT3070, RT3071 & RT3072 | |
| Support for these devices is non-functional at the moment and is | |
| intended for testers and developers. | |
| config RT2800USB_RT35XX | |
| bool "rt2800usb - Include support for rt35xx (USB) devices" | |
| default n | |
| ---help--- | |
| This adds support for rt35xx wireless chipset family to the | |
| rt2800usb driver. | |
| Supported chips: RT3572 | |
| Support for these devices is non-functional at the moment and is | |
| intended for testers and developers. | |
| config RT2800USB_UNKNOWN | |
| bool "rt2800usb - Include support for unknown (USB) devices" | |
| default n | |
| ---help--- | |
| This adds support for rt2800 family devices that are known to | |
| have a rt2800 family chipset, but for which the exact chipset | |
| is unknown. | |
| Support status for these devices is unknown, and enabling these | |
| devices may or may not work. | |
| endif | |
| config RT2800_LIB | |
| tristate | |
| config RT2X00_LIB_PCI | |
| tristate | |
| select RT2X00_LIB | |
| config RT2X00_LIB_SOC | |
| tristate | |
| select RT2X00_LIB | |
| config RT2X00_LIB_USB | |
| tristate | |
| select RT2X00_LIB | |
| config RT2X00_LIB | |
| tristate | |
| config RT2X00_LIB_HT | |
| boolean | |
| config RT2X00_LIB_FIRMWARE | |
| boolean | |
| select FW_LOADER | |
| config RT2X00_LIB_CRYPTO | |
| boolean | |
| config RT2X00_LIB_LEDS | |
| boolean | |
| default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n) | |
| config RT2X00_LIB_DEBUGFS | |
| bool "Ralink debugfs support" | |
| depends on RT2X00_LIB && MAC80211_DEBUGFS | |
| ---help--- | |
| Enable creation of debugfs files for the rt2x00 drivers. | |
| These debugfs files support both reading and writing of the | |
| most important register types of the rt2x00 hardware. | |
| config RT2X00_DEBUG | |
| bool "Ralink debug output" | |
| depends on RT2X00_LIB | |
| ---help--- | |
| Enable debugging output for all rt2x00 modules | |
| endif |