| /* |
| * Misc system wide definitions |
| * |
| * Copyright (C) 2017, Broadcom. All Rights Reserved. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION |
| * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN |
| * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| * |
| * |
| * <<Broadcom-WL-IPTag/Open:>> |
| * |
| * $Id: bcmdefs.h 659962 2016-09-16 18:46:17Z $ |
| */ |
| |
| #ifndef _bcmdefs_h_ |
| #define _bcmdefs_h_ |
| |
| /* |
| * One doesn't need to include this file explicitly, gets included automatically if |
| * typedefs.h is included. |
| */ |
| |
| /* Use BCM_REFERENCE to suppress warnings about intentionally-unused function |
| * arguments or local variables. |
| */ |
| #define BCM_REFERENCE(data) ((void)(data)) |
| |
| /* Allow for suppressing unused variable warnings. */ |
| #ifdef __GNUC__ |
| #define UNUSED_VAR __attribute__ ((unused)) |
| #else |
| #define UNUSED_VAR |
| #endif |
| |
| /* Compile-time assert can be used in place of ASSERT if the expression evaluates |
| * to a constant at compile time. |
| */ |
| #define STATIC_ASSERT(expr) { \ |
| /* Make sure the expression is constant. */ \ |
| typedef enum { _STATIC_ASSERT_NOT_CONSTANT = (expr) } _static_assert_e UNUSED_VAR; \ |
| /* Make sure the expression is true. */ \ |
| typedef char STATIC_ASSERT_FAIL[(expr) ? 1 : -1] UNUSED_VAR; \ |
| } |
| |
| /* Reclaiming text and data : |
| * The following macros specify special linker sections that can be reclaimed |
| * after a system is considered 'up'. |
| * BCMATTACHFN is also used for detach functions (it's not worth having a BCMDETACHFN, |
| * as in most cases, the attach function calls the detach function to clean up on error). |
| */ |
| #if defined(BCM_RECLAIM) |
| |
| extern bool bcm_reclaimed; |
| extern bool bcm_attach_part_reclaimed; |
| extern bool bcm_preattach_part_reclaimed; |
| extern bool bcm_postattach_part_reclaimed; |
| |
| #define RECLAIMED() (bcm_reclaimed) |
| #define ATTACH_PART_RECLAIMED() (bcm_attach_part_reclaimed) |
| #define PREATTACH_PART_RECLAIMED() (bcm_preattach_part_reclaimed) |
| #define POSTATTACH_PART_RECLAIMED() (bcm_postattach_part_reclaimed) |
| |
| #if defined(BCM_RECLAIM_ATTACH_FN_DATA) |
| #define BCMATTACHDATA(_data) __attribute__ ((__section__ (".dataini2." #_data))) _data |
| #define BCMATTACHFN(_fn) __attribute__ ((__section__ (".textini2." #_fn), noinline)) _fn |
| |
| /* Relocate attach symbols to save-restore region to increase pre-reclaim heap size. */ |
| #define BCM_SRM_ATTACH_DATA(_data) __attribute__ ((__section__ (".datasrm." #_data))) _data |
| #define BCM_SRM_ATTACH_FN(_fn) __attribute__ ((__section__ (".textsrm." #_fn), noinline)) _fn |
| |
| #ifndef PREATTACH_NORECLAIM |
| #define BCMPREATTACHDATA(_data) __attribute__ ((__section__ (".dataini3." #_data))) _data |
| #define BCMPREATTACHFN(_fn) __attribute__ ((__section__ (".textini3." #_fn), noinline)) _fn |
| #else |
| #define BCMPREATTACHDATA(_data) __attribute__ ((__section__ (".dataini2." #_data))) _data |
| #define BCMPREATTACHFN(_fn) __attribute__ ((__section__ (".textini2." #_fn), noinline)) _fn |
| #endif /* PREATTACH_NORECLAIM */ |
| #define BCMPOSTATTACHDATA(_data) __attribute__ ((__section__ (".dataini5." #_data))) _data |
| #define BCMPOSTATTACHFN(_fn) __attribute__ ((__section__ (".textini5." #_fn), noinline)) _fn |
| #else /* BCM_RECLAIM_ATTACH_FN_DATA */ |
| #define BCMATTACHDATA(_data) _data |
| #define BCMATTACHFN(_fn) _fn |
| #define BCMPREATTACHDATA(_data) _data |
| #define BCMPREATTACHFN(_fn) _fn |
| #define BCMPOSTATTACHDATA(_data) _data |
| #define BCMPOSTATTACHFN(_fn) _fn |
| #endif /* BCM_RECLAIM_ATTACH_FN_DATA */ |
| |
| #ifdef BCMDBG_SR |
| /* |
| * Don't reclaim so we can compare SR ASM |
| */ |
| #define BCMPREATTACHDATASR(_data) _data |
| #define BCMPREATTACHFNSR(_fn) _fn |
| #define BCMATTACHDATASR(_data) _data |
| #define BCMATTACHFNSR(_fn) _fn |
| #else |
| #define BCMPREATTACHDATASR(_data) BCMPREATTACHDATA(_data) |
| #define BCMPREATTACHFNSR(_fn) BCMPREATTACHFN(_fn) |
| #define BCMATTACHDATASR(_data) BCMATTACHDATA(_data) |
| #define BCMATTACHFNSR(_fn) BCMATTACHFN(_fn) |
| #endif |
| |
| #if defined(BCM_RECLAIM_INIT_FN_DATA) |
| #define BCMINITDATA(_data) __attribute__ ((__section__ (".dataini1." #_data))) _data |
| #define BCMINITFN(_fn) __attribute__ ((__section__ (".textini1." #_fn), noinline)) _fn |
| #define CONST |
| #else /* BCM_RECLAIM_INIT_FN_DATA */ |
| #define BCMINITDATA(_data) _data |
| #define BCMINITFN(_fn) _fn |
| #ifndef CONST |
| #define CONST const |
| #endif |
| #endif /* BCM_RECLAIM_INIT_FN_DATA */ |
| |
| /* Non-manufacture or internal attach function/dat */ |
| #define BCMNMIATTACHFN(_fn) BCMATTACHFN(_fn) |
| #define BCMNMIATTACHDATA(_data) BCMATTACHDATA(_data) |
| |
| /* SROM with OTP support */ |
| #if defined(BCMOTPSROM) |
| #define BCMSROMATTACHFN(_fn) _fn |
| #define BCMSROMATTACHDATA(_data) _data |
| #else |
| #define BCMSROMATTACHFN(_fn) BCMNMIATTACHFN(_fn) |
| #define BCMSROMATTACHDATA(_data) BCMNMIATTACHFN(_data) |
| #endif /* BCMOTPSROM */ |
| |
| #ifdef BCMNODOWN |
| #define BCMUNINITFN(_fn) BCMINITFN(_fn) |
| #else |
| #define BCMUNINITFN(_fn) _fn |
| #endif |
| |
| #else /* BCM_RECLAIM */ |
| |
| #define bcm_reclaimed (1) |
| #define bcm_attach_part_reclaimed (1) |
| #define bcm_preattach_part_reclaimed (1) |
| #define bcm_postattach_part_reclaimed (1) |
| #define BCMATTACHDATA(_data) _data |
| #define BCMATTACHFN(_fn) _fn |
| #define BCM_SRM_ATTACH_DATA(_data) _data |
| #define BCM_SRM_ATTACH_FN(_fn) _fn |
| #define BCMPREATTACHDATA(_data) _data |
| #define BCMPREATTACHFN(_fn) _fn |
| #define BCMPOSTATTACHDATA(_data) _data |
| #define BCMPOSTATTACHFN(_fn) _fn |
| #define BCMINITDATA(_data) _data |
| #define BCMINITFN(_fn) _fn |
| #define BCMUNINITFN(_fn) _fn |
| #define BCMNMIATTACHFN(_fn) _fn |
| #define BCMNMIATTACHDATA(_data) _data |
| #define BCMSROMATTACHFN(_fn) _fn |
| #define BCMSROMATTACHDATA(_data) _data |
| #define BCMPREATTACHFNSR(_fn) _fn |
| #define BCMPREATTACHDATASR(_data) _data |
| #define BCMATTACHFNSR(_fn) _fn |
| #define BCMATTACHDATASR(_data) _data |
| #define CONST const |
| |
| #define RECLAIMED() (bcm_reclaimed) |
| #define ATTACH_PART_RECLAIMED() (bcm_attach_part_reclaimed) |
| #define PREATTACH_PART_RECLAIMED() (bcm_preattach_part_reclaimed) |
| #define POSTATTACH_PART_RECLAIMED() (bcm_postattach_part_reclaimed) |
| |
| #endif /* BCM_RECLAIM */ |
| |
| #define BCMUCODEDATA(_data) BCMINITDATA(_data) |
| |
| #if defined(BCM_DMA_CT) && !defined(BCM_DMA_CT_DISABLED) |
| #define BCMUCODEFN(_fn) BCMINITFN(_fn) |
| #else |
| #define BCMUCODEFN(_fn) BCMATTACHFN(_fn) |
| #endif /* BCM_DMA_CT */ |
| |
| #if !defined STB |
| #if defined(BCM47XX) && defined(__ARM_ARCH_7A__) && !defined(OEM_ANDROID) |
| #define BCM47XX_CA9 |
| #else |
| #undef BCM47XX_CA9 |
| #endif /* BCM47XX && __ARM_ARCH_7A__ && !OEM_ANDROID */ |
| #endif /* STB */ |
| |
| /* BCMFASTPATH Related Macro defines |
| */ |
| #ifndef BCMFASTPATH |
| #if defined(mips) || defined(BCM47XX_CA9) || defined(STB) |
| #define BCMFASTPATH __attribute__ ((__section__ (".text.fastpath"))) |
| #define BCMFASTPATH_HOST __attribute__ ((__section__ (".text.fastpath_host"))) |
| #else /* mips || BCM47XX_CA9 || STB */ |
| #define BCMFASTPATH |
| #define BCMFASTPATH_HOST |
| #endif /* mips || BCM47XX_CA9 || STB */ |
| #endif /* BCMFASTPATH */ |
| |
| /* Use the BCMRAMFN() macro to tag functions in source that must be included in RAM (excluded from |
| * ROM). This should eliminate the need to manually specify these functions in the ROM config file. |
| * It should only be used in special cases where the function must be in RAM for *all* ROM-based |
| * chips. |
| */ |
| #if defined(BCMROMBUILD) |
| #define BCMRAMFN(_fn) __attribute__ ((__section__ (".text_ram." #_fn), noinline)) _fn |
| #else |
| #define BCMRAMFN(_fn) _fn |
| #endif |
| |
| #define STATIC static |
| |
| /* Bus types */ |
| #define SI_BUS 0 /* SOC Interconnect */ |
| #define PCI_BUS 1 /* PCI target */ |
| #define PCMCIA_BUS 2 /* PCMCIA target */ |
| #define SDIO_BUS 3 /* SDIO target */ |
| #define JTAG_BUS 4 /* JTAG */ |
| #define USB_BUS 5 /* USB (does not support R/W REG) */ |
| #define SPI_BUS 6 /* gSPI target */ |
| #define RPC_BUS 7 /* RPC target */ |
| |
| /* Allows size optimization for single-bus image */ |
| #ifdef BCMBUSTYPE |
| #define BUSTYPE(bus) (BCMBUSTYPE) |
| #else |
| #define BUSTYPE(bus) (bus) |
| #endif |
| |
| #ifdef BCMBUSCORETYPE |
| #define BUSCORETYPE(ct) (BCMBUSCORETYPE) |
| #else |
| #define BUSCORETYPE(ct) (ct) |
| #endif |
| |
| /* Allows size optimization for single-backplane image */ |
| #ifdef BCMCHIPTYPE |
| #define CHIPTYPE(bus) (BCMCHIPTYPE) |
| #else |
| #define CHIPTYPE(bus) (bus) |
| #endif |
| |
| |
| /* Allows size optimization for SPROM support */ |
| #if defined(BCMSPROMBUS) |
| #define SPROMBUS (BCMSPROMBUS) |
| #elif defined(SI_PCMCIA_SROM) |
| #define SPROMBUS (PCMCIA_BUS) |
| #else |
| #define SPROMBUS (PCI_BUS) |
| #endif |
| |
| /* Allows size optimization for single-chip image */ |
| #ifdef BCMCHIPID |
| #define CHIPID(chip) (BCMCHIPID) |
| #else |
| #define CHIPID(chip) (chip) |
| #endif |
| |
| #ifdef BCMCHIPREV |
| #define CHIPREV(rev) (BCMCHIPREV) |
| #else |
| #define CHIPREV(rev) (rev) |
| #endif |
| |
| #ifdef BCMPCIEREV |
| #define PCIECOREREV(rev) (BCMPCIEREV) |
| #else |
| #define PCIECOREREV(rev) (rev) |
| #endif |
| |
| #ifdef BCMPMUREV |
| #define PMUREV(rev) (BCMPMUREV) |
| #else |
| #define PMUREV(rev) (rev) |
| #endif |
| |
| #ifdef BCMCCREV |
| #define CCREV(rev) (BCMCCREV) |
| #else |
| #define CCREV(rev) (rev) |
| #endif |
| |
| #ifdef BCMGCIREV |
| #define GCIREV(rev) (BCMGCIREV) |
| #else |
| #define GCIREV(rev) (rev) |
| #endif |
| |
| /* Defines for DMA Address Width - Shared between OSL and HNDDMA */ |
| #define DMADDR_MASK_32 0x0 /* Address mask for 32-bits */ |
| #define DMADDR_MASK_30 0xc0000000 /* Address mask for 30-bits */ |
| #define DMADDR_MASK_26 0xFC000000 /* Address maks for 26-bits */ |
| #define DMADDR_MASK_0 0xffffffff /* Address mask for 0-bits (hi-part) */ |
| |
| #define DMADDRWIDTH_26 26 /* 26-bit addressing capability */ |
| #define DMADDRWIDTH_30 30 /* 30-bit addressing capability */ |
| #define DMADDRWIDTH_32 32 /* 32-bit addressing capability */ |
| #define DMADDRWIDTH_63 63 /* 64-bit addressing capability */ |
| #define DMADDRWIDTH_64 64 /* 64-bit addressing capability */ |
| |
| typedef struct { |
| uint32 loaddr; |
| uint32 hiaddr; |
| } dma64addr_t; |
| |
| #define PHYSADDR64HI(_pa) ((_pa).hiaddr) |
| #define PHYSADDR64HISET(_pa, _val) \ |
| do { \ |
| (_pa).hiaddr = (_val); \ |
| } while (0) |
| #define PHYSADDR64LO(_pa) ((_pa).loaddr) |
| #define PHYSADDR64LOSET(_pa, _val) \ |
| do { \ |
| (_pa).loaddr = (_val); \ |
| } while (0) |
| |
| #ifdef BCMDMA64OSL |
| typedef dma64addr_t dmaaddr_t; |
| #define PHYSADDRHI(_pa) PHYSADDR64HI(_pa) |
| #define PHYSADDRHISET(_pa, _val) PHYSADDR64HISET(_pa, _val) |
| #define PHYSADDRLO(_pa) PHYSADDR64LO(_pa) |
| #define PHYSADDRLOSET(_pa, _val) PHYSADDR64LOSET(_pa, _val) |
| #define PHYSADDRTOULONG(_pa, _ulong) \ |
| do { \ |
| _ulong = ((unsigned long long)(_pa).hiaddr << 32) | ((_pa).loaddr); \ |
| } while (0) |
| |
| #else |
| typedef unsigned long dmaaddr_t; |
| #define PHYSADDRHI(_pa) (0) |
| #define PHYSADDRHISET(_pa, _val) |
| #define PHYSADDRLO(_pa) ((_pa)) |
| #define PHYSADDRLOSET(_pa, _val) \ |
| do { \ |
| (_pa) = (_val); \ |
| } while (0) |
| #endif /* BCMDMA64OSL */ |
| #define PHYSADDRISZERO(_pa) (PHYSADDRLO(_pa) == 0 && PHYSADDRHI(_pa) == 0) |
| |
| /* One physical DMA segment */ |
| typedef struct { |
| dmaaddr_t addr; |
| uint32 length; |
| } hnddma_seg_t; |
| |
| #if defined(linux) |
| #define MAX_DMA_SEGS 8 |
| #else |
| #define MAX_DMA_SEGS 4 |
| #endif |
| |
| |
| typedef struct { |
| void *oshdmah; /* Opaque handle for OSL to store its information */ |
| uint origsize; /* Size of the virtual packet */ |
| uint nsegs; |
| hnddma_seg_t segs[MAX_DMA_SEGS]; |
| } hnddma_seg_map_t; |
| |
| |
| /* packet headroom necessary to accommodate the largest header in the system, (i.e TXOFF). |
| * By doing, we avoid the need to allocate an extra buffer for the header when bridging to WL. |
| * There is a compile time check in wlc.c which ensure that this value is at least as big |
| * as TXOFF. This value is used in dma_rxfill (hnddma.c). |
| */ |
| |
| #if defined(BCM_RPC_NOCOPY) || defined(BCM_RCP_TXNOCOPY) |
| /* add 40 bytes to allow for extra RPC header and info */ |
| #define BCMEXTRAHDROOM 260 |
| #else /* BCM_RPC_NOCOPY || BCM_RPC_TXNOCOPY */ |
| #if defined(linux) && (defined(BCM47XX_CA9) || defined(STB)) |
| #if defined(BCM_GMAC3) |
| #define BCMEXTRAHDROOM 32 /* For FullDongle, no D11 headroom space required. */ |
| #define BCMEXTRAHDROOM_NIC 224 |
| #else |
| #define BCMEXTRAHDROOM 224 |
| #endif /* ! BCM_GMAC3 */ |
| #else |
| #ifdef CTFMAP |
| #define BCMEXTRAHDROOM 208 |
| #else /* CTFMAP */ |
| #define BCMEXTRAHDROOM 204 |
| #endif /* CTFMAP */ |
| #endif /* linux && BCM47XX_CA9 */ |
| #endif /* BCM_RPC_NOCOPY || BCM_RPC_TXNOCOPY */ |
| |
| /* Packet alignment for most efficient SDIO (can change based on platform) */ |
| #ifndef SDALIGN |
| #define SDALIGN 32 |
| #endif |
| |
| /* Headroom required for dongle-to-host communication. Packets allocated |
| * locally in the dongle (e.g. for CDC ioctls or RNDIS messages) should |
| * leave this much room in front for low-level message headers which may |
| * be needed to get across the dongle bus to the host. (These messages |
| * don't go over the network, so room for the full WL header above would |
| * be a waste.). |
| */ |
| #define BCMDONGLEHDRSZ 12 |
| #define BCMDONGLEPADSZ 16 |
| |
| #define BCMDONGLEOVERHEAD (BCMDONGLEHDRSZ + BCMDONGLEPADSZ) |
| |
| #ifdef BCMDBG |
| |
| #ifndef BCMDBG_ERR |
| #define BCMDBG_ERR |
| #endif /* BCMDBG_ERR */ |
| |
| #ifndef BCMDBG_ASSERT |
| #define BCMDBG_ASSERT |
| #endif /* BCMDBG_ASSERT */ |
| |
| #endif /* BCMDBG */ |
| |
| #if defined(NO_BCMDBG_ASSERT) |
| # undef BCMDBG_ASSERT |
| # undef BCMASSERT_LOG |
| #endif |
| |
| #if defined(BCMDBG_ASSERT) || defined(BCMASSERT_LOG) |
| #define BCMASSERT_SUPPORT |
| #endif /* BCMDBG_ASSERT || BCMASSERT_LOG */ |
| |
| /* Macros for doing definition and get/set of bitfields |
| * Usage example, e.g. a three-bit field (bits 4-6): |
| * #define <NAME>_M BITFIELD_MASK(3) |
| * #define <NAME>_S 4 |
| * ... |
| * regval = R_REG(osh, ®s->regfoo); |
| * field = GFIELD(regval, <NAME>); |
| * regval = SFIELD(regval, <NAME>, 1); |
| * W_REG(osh, ®s->regfoo, regval); |
| */ |
| #define BITFIELD_MASK(width) \ |
| (((unsigned)1 << (width)) - 1) |
| #define GFIELD(val, field) \ |
| (((val) >> field ## _S) & field ## _M) |
| #define SFIELD(val, field, bits) \ |
| (((val) & (~(field ## _M << field ## _S))) | \ |
| ((unsigned)(bits) << field ## _S)) |
| |
| /* define BCMSMALL to remove misc features for memory-constrained environments */ |
| #ifdef BCMSMALL |
| #undef BCMSPACE |
| #define bcmspace FALSE /* if (bcmspace) code is discarded */ |
| #else |
| #define BCMSPACE |
| #define bcmspace TRUE /* if (bcmspace) code is retained */ |
| #endif |
| |
| /* Max. nvram variable table size */ |
| #ifndef MAXSZ_NVRAM_VARS |
| #ifdef LARGE_NVRAM_MAXSZ |
| #define MAXSZ_NVRAM_VARS (LARGE_NVRAM_MAXSZ * 2) |
| #else |
| #if defined(BCMROMBUILD) || defined(DONGLEBUILD) |
| /* SROM12 changes */ |
| #define MAXSZ_NVRAM_VARS 6144 |
| #else |
| #define LARGE_NVRAM_MAXSZ 8192 |
| #define MAXSZ_NVRAM_VARS (LARGE_NVRAM_MAXSZ * 2) |
| #endif /* BCMROMBUILD || DONGLEBUILD */ |
| #endif /* LARGE_NVRAM_MAXSZ */ |
| #endif /* !MAXSZ_NVRAM_VARS */ |
| |
| #ifdef ATE_BUILD |
| #ifndef ATE_NVRAM_MAXSIZE |
| #define ATE_NVRAM_MAXSIZE 32000 |
| #endif /* ATE_NVRAM_MAXSIZE */ |
| #endif /* ATE_BUILD */ |
| |
| |
| /* WL_ENAB_RUNTIME_CHECK may be set based upon the #define below (for ROM builds). It may also |
| * be defined via makefiles (e.g. ROM auto abandon unoptimized compiles). |
| */ |
| #if defined(BCMROMBUILD) |
| #ifndef WL_ENAB_RUNTIME_CHECK |
| #define WL_ENAB_RUNTIME_CHECK |
| #endif |
| #endif /* BCMROMBUILD */ |
| |
| #ifdef BCMLFRAG /* BCMLFRAG support enab macros */ |
| extern bool _bcmlfrag; |
| #if defined(WL_ENAB_RUNTIME_CHECK) || !defined(DONGLEBUILD) |
| #define BCMLFRAG_ENAB() (_bcmlfrag) |
| #elif defined(BCMLFRAG_DISABLED) |
| #define BCMLFRAG_ENAB() (0) |
| #else |
| #define BCMLFRAG_ENAB() (1) |
| #endif |
| #else |
| #define BCMLFRAG_ENAB() (0) |
| #endif /* BCMLFRAG_ENAB */ |
| |
| #ifdef BCMPCIEDEV /* BCMPCIEDEV support enab macros */ |
| extern bool _pciedevenab; |
| #if defined(WL_ENAB_RUNTIME_CHECK) |
| #define BCMPCIEDEV_ENAB() (_pciedevenab) |
| #elif defined(BCMPCIEDEV_ENABLED) |
| #define BCMPCIEDEV_ENAB() 1 |
| #else |
| #define BCMPCIEDEV_ENAB() 0 |
| #endif |
| #else |
| #define BCMPCIEDEV_ENAB() 0 |
| #endif /* BCMPCIEDEV */ |
| |
| #ifdef BCMRESVFRAGPOOL /* BCMRESVFRAGPOOL support enab macros */ |
| extern bool _resvfragpool_enab; |
| #if defined(WL_ENAB_RUNTIME_CHECK) || !defined(DONGLEBUILD) |
| #define BCMRESVFRAGPOOL_ENAB() (_resvfragpool_enab) |
| #elif defined(BCMRESVFRAGPOOL_ENABLED) |
| #define BCMRESVFRAGPOOL_ENAB() 1 |
| #else |
| #define BCMRESVFRAGPOOL_ENAB() 0 |
| #endif |
| #else |
| #define BCMRESVFRAGPOOL_ENAB() 0 |
| #endif /* BCMPCIEDEV */ |
| |
| #ifdef BCMSDIODEV /* BCMSDIODEV support enab macros */ |
| extern bool _sdiodevenab; |
| #if defined(WL_ENAB_RUNTIME_CHECK) || !defined(DONGLEBUILD) |
| #define BCMSDIODEV_ENAB() (_sdiodevenab) |
| #elif defined(BCMSDIODEV_ENABLED) |
| #define BCMSDIODEV_ENAB() 1 |
| #else |
| #define BCMSDIODEV_ENAB() 0 |
| #endif |
| #else |
| #define BCMSDIODEV_ENAB() 0 |
| #endif /* BCMSDIODEV */ |
| |
| /* Max size for reclaimable NVRAM array */ |
| #ifndef ATE_BUILD |
| #ifdef DL_NVRAM |
| #define NVRAM_ARRAY_MAXSIZE DL_NVRAM |
| #else |
| #define NVRAM_ARRAY_MAXSIZE MAXSZ_NVRAM_VARS |
| #endif /* DL_NVRAM */ |
| #else |
| #define NVRAM_ARRAY_MAXSIZE ATE_NVRAM_MAXSIZE |
| #endif /* ATE_BUILD */ |
| |
| extern uint32 gFWID; |
| |
| #ifdef BCMFRWDPOOLREORG /* BCMFRWDPOOLREORG support enab macros */ |
| extern bool _bcmfrwdpoolreorg; |
| #if defined(WL_ENAB_RUNTIME_CHECK) || !defined(DONGLEBUILD) |
| #define BCMFRWDPOOLREORG_ENAB() (_bcmfrwdpoolreorg) |
| #elif defined(BCMFRWDPOOLREORG_DISABLED) |
| #define BCMFRWDPOOLREORG_ENAB() (0) |
| #else |
| #define BCMFRWDPOOLREORG_ENAB() (1) |
| #endif |
| #else |
| #define BCMFRWDPOOLREORG_ENAB() (0) |
| #endif /* BCMFRWDPOOLREORG */ |
| |
| #ifdef BCMPOOLRECLAIM /* BCMPOOLRECLAIM support enab macros */ |
| extern bool _bcmpoolreclaim; |
| #if defined(WL_ENAB_RUNTIME_CHECK) || !defined(DONGLEBUILD) |
| #define BCMPOOLRECLAIM_ENAB() (_bcmpoolreclaim) |
| #elif defined(BCMPOOLRECLAIM_DISABLED) |
| #define BCMPOOLRECLAIM_ENAB() (0) |
| #else |
| #define BCMPOOLRECLAIM_ENAB() (1) |
| #endif |
| #else |
| #define BCMPOOLRECLAIM_ENAB() (0) |
| #endif /* BCMPOOLRECLAIM */ |
| |
| /* Chip related low power flags (lpflags) */ |
| |
| #ifndef PAD |
| #define _PADLINE(line) pad ## line |
| #define _XSTR(line) _PADLINE(line) |
| #define PAD _XSTR(__LINE__) |
| #endif |
| |
| #ifndef FRAG_HEADROOM |
| #define FRAG_HEADROOM 224 /* In absence of SFD, use default headroom of 224 */ |
| #endif |
| |
| #ifdef DONGLEBUILD |
| #define MODULE_DETACH(var, detach_func) |
| #define MODULE_DETACH_TYPECASTED(var, detach_func) |
| #else |
| #define MODULE_DETACH(var, detach_func)\ |
| if (var) { \ |
| detach_func(var); \ |
| (var) = NULL; \ |
| } |
| #define MODULE_DETACH_TYPECASTED(var, detach_func) detach_func(var) |
| #endif /* DONGLEBUILD */ |
| |
| #endif /* _bcmdefs_h_ */ |