| LEDs connected to pca9632, pca9633 or pca9634 |
| |
| Required properties: |
| - compatible : should be : "nxp,pca9632", "nxp,pca9633", "nxp,pca9634" or "nxp,pca9635" |
| |
| Optional properties: |
| - nxp,totem-pole : use totem pole (push-pull) instead of open-drain (pca9632 defaults |
| to open-drain, newer chips to totem pole) |
| - nxp,hw-blink : use hardware blinking instead of software blinking |
| |
| Each led is represented as a sub-node of the nxp,pca963x device. |
| |
| LED sub-node properties: |
| - label : (optional) see Documentation/devicetree/bindings/leds/common.txt |
| - reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633, |
| 0 to 7 in pca9634, or 0 to 15 in pca9635) |
| - linux,default-trigger : (optional) |
| see Documentation/devicetree/bindings/leds/common.txt |
| |
| Examples: |
| |
| pca9632: pca9632 { |
| compatible = "nxp,pca9632"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x62>; |
| |
| red@0 { |
| label = "red"; |
| reg = <0>; |
| linux,default-trigger = "none"; |
| }; |
| green@1 { |
| label = "green"; |
| reg = <1>; |
| linux,default-trigger = "none"; |
| }; |
| blue@2 { |
| label = "blue"; |
| reg = <2>; |
| linux,default-trigger = "none"; |
| }; |
| unused@3 { |
| label = "unused"; |
| reg = <3>; |
| linux,default-trigger = "none"; |
| }; |
| }; |
