| * Atmel AC97 controller |
| |
| Required properties: |
| - compatible: "atmel,at91sam9263-ac97c" |
| - reg: Address and length of the register set for the device |
| - interrupts: Should contain AC97 interrupt |
| - ac97-gpios: Please refer to soc-ac97link.txt, only ac97-reset is used |
| Optional properties: |
| - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt |
| |
| Example: |
| sound@fffa0000 { |
| compatible = "atmel,at91sam9263-ac97c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ac97>; |
| reg = <0xfffa0000 0x4000>; |
| interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>; |
| |
| ac97-gpios = <&pioB 0 0 &pioB 2 0 &pioC 29 GPIO_ACTIVE_LOW>; |
| }; |
