| Kernel driver hih6130 |
| ===================== |
| |
| Supported chips: |
| * Honeywell HIH-6130 / HIH-6131 |
| Prefix: 'hih6130' |
| Addresses scanned: none |
| Datasheet: Publicly available at the Honeywell website |
| http://sensing.honeywell.com/index.php?ci_id=3106&la_id=1&defId=44872 |
| |
| Author: |
| Iain Paton <ipaton0@gmail.com> |
| |
| Description |
| ----------- |
| |
| The HIH-6130 & HIH-6131 are humidity and temperature sensors in a SO8 package. |
| The difference between the two devices is that the HIH-6131 has a condensation |
| filter. |
| |
| The devices communicate with the I2C protocol. All sensors are set to the same |
| I2C address 0x27 by default, so an entry with I2C_BOARD_INFO("hih6130", 0x27) |
| can be used in the board setup code. |
| |
| Please see Documentation/i2c/instantiating-devices for details on how to |
| instantiate I2C devices. |
| |
| sysfs-Interface |
| --------------- |
| |
| temp1_input - temperature input |
| humidity1_input - humidity input |
| |
| Notes |
| ----- |
| |
| Command mode and alarms are not currently supported. |
