|  | /* | 
|  | *	linux/arch/alpha/kernel/core_tsunami.c | 
|  | * | 
|  | * Based on code written by David A. Rusling (david.rusling@reo.mts.dec.com). | 
|  | * | 
|  | * Code common to all TSUNAMI core logic chips. | 
|  | */ | 
|  |  | 
|  | #define __EXTERN_INLINE inline | 
|  | #include <asm/io.h> | 
|  | #include <asm/core_tsunami.h> | 
|  | #undef __EXTERN_INLINE | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/bootmem.h> | 
|  |  | 
|  | #include <asm/ptrace.h> | 
|  | #include <asm/smp.h> | 
|  | #include <asm/vga.h> | 
|  |  | 
|  | #include "proto.h" | 
|  | #include "pci_impl.h" | 
|  |  | 
|  | /* Save Tsunami configuration data as the console had it set up.  */ | 
|  |  | 
|  | struct | 
|  | { | 
|  | unsigned long wsba[4]; | 
|  | unsigned long wsm[4]; | 
|  | unsigned long tba[4]; | 
|  | } saved_config[2] __attribute__((common)); | 
|  |  | 
|  | /* | 
|  | * NOTE: Herein lie back-to-back mb instructions.  They are magic. | 
|  | * One plausible explanation is that the I/O controller does not properly | 
|  | * handle the system transaction.  Another involves timing.  Ho hum. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * BIOS32-style PCI interface: | 
|  | */ | 
|  |  | 
|  | #define DEBUG_CONFIG 0 | 
|  |  | 
|  | #if DEBUG_CONFIG | 
|  | # define DBG_CFG(args)	printk args | 
|  | #else | 
|  | # define DBG_CFG(args) | 
|  | #endif | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Given a bus, device, and function number, compute resulting | 
|  | * configuration space address | 
|  | * accordingly.  It is therefore not safe to have concurrent | 
|  | * invocations to configuration space access routines, but there | 
|  | * really shouldn't be any need for this. | 
|  | * | 
|  | * Note that all config space accesses use Type 1 address format. | 
|  | * | 
|  | * Note also that type 1 is determined by non-zero bus number. | 
|  | * | 
|  | * Type 1: | 
|  | * | 
|  | *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 | 
|  | *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0 | 
|  | * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | 
|  | * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1| | 
|  | * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | 
|  | * | 
|  | *	31:24	reserved | 
|  | *	23:16	bus number (8 bits = 128 possible buses) | 
|  | *	15:11	Device number (5 bits) | 
|  | *	10:8	function number | 
|  | *	 7:2	register number | 
|  | * | 
|  | * Notes: | 
|  | *	The function number selects which function of a multi-function device | 
|  | *	(e.g., SCSI and Ethernet). | 
|  | * | 
|  | *	The register selects a DWORD (32 bit) register offset.  Hence it | 
|  | *	doesn't get shifted by 2 bits as we want to "drop" the bottom two | 
|  | *	bits. | 
|  | */ | 
|  |  | 
|  | static int | 
|  | mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where, | 
|  | unsigned long *pci_addr, unsigned char *type1) | 
|  | { | 
|  | struct pci_controller *hose = pbus->sysdata; | 
|  | unsigned long addr; | 
|  | u8 bus = pbus->number; | 
|  |  | 
|  | DBG_CFG(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x, " | 
|  | "pci_addr=0x%p, type1=0x%p)\n", | 
|  | bus, device_fn, where, pci_addr, type1)); | 
|  |  | 
|  | if (!pbus->parent) /* No parent means peer PCI bus. */ | 
|  | bus = 0; | 
|  | *type1 = (bus != 0); | 
|  |  | 
|  | addr = (bus << 16) | (device_fn << 8) | where; | 
|  | addr |= hose->config_space_base; | 
|  |  | 
|  | *pci_addr = addr; | 
|  | DBG_CFG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | tsunami_read_config(struct pci_bus *bus, unsigned int devfn, int where, | 
|  | int size, u32 *value) | 
|  | { | 
|  | unsigned long addr; | 
|  | unsigned char type1; | 
|  |  | 
|  | if (mk_conf_addr(bus, devfn, where, &addr, &type1)) | 
|  | return PCIBIOS_DEVICE_NOT_FOUND; | 
|  |  | 
|  | switch (size) { | 
|  | case 1: | 
|  | *value = __kernel_ldbu(*(vucp)addr); | 
|  | break; | 
|  | case 2: | 
|  | *value = __kernel_ldwu(*(vusp)addr); | 
|  | break; | 
|  | case 4: | 
|  | *value = *(vuip)addr; | 
|  | break; | 
|  | } | 
|  |  | 
|  | return PCIBIOS_SUCCESSFUL; | 
|  | } | 
|  |  | 
|  | static int | 
|  | tsunami_write_config(struct pci_bus *bus, unsigned int devfn, int where, | 
|  | int size, u32 value) | 
|  | { | 
|  | unsigned long addr; | 
|  | unsigned char type1; | 
|  |  | 
|  | if (mk_conf_addr(bus, devfn, where, &addr, &type1)) | 
|  | return PCIBIOS_DEVICE_NOT_FOUND; | 
|  |  | 
|  | switch (size) { | 
|  | case 1: | 
|  | __kernel_stb(value, *(vucp)addr); | 
|  | mb(); | 
|  | __kernel_ldbu(*(vucp)addr); | 
|  | break; | 
|  | case 2: | 
|  | __kernel_stw(value, *(vusp)addr); | 
|  | mb(); | 
|  | __kernel_ldwu(*(vusp)addr); | 
|  | break; | 
|  | case 4: | 
|  | *(vuip)addr = value; | 
|  | mb(); | 
|  | *(vuip)addr; | 
|  | break; | 
|  | } | 
|  |  | 
|  | return PCIBIOS_SUCCESSFUL; | 
|  | } | 
|  |  | 
|  | struct pci_ops tsunami_pci_ops = | 
|  | { | 
|  | .read =		tsunami_read_config, | 
|  | .write = 	tsunami_write_config, | 
|  | }; | 
|  |  | 
|  | void | 
|  | tsunami_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end) | 
|  | { | 
|  | tsunami_pchip *pchip = hose->index ? TSUNAMI_pchip1 : TSUNAMI_pchip0; | 
|  | volatile unsigned long *csr; | 
|  | unsigned long value; | 
|  |  | 
|  | /* We can invalidate up to 8 tlb entries in a go.  The flush | 
|  | matches against <31:16> in the pci address.  */ | 
|  | csr = &pchip->tlbia.csr; | 
|  | if (((start ^ end) & 0xffff0000) == 0) | 
|  | csr = &pchip->tlbiv.csr; | 
|  |  | 
|  | /* For TBIA, it doesn't matter what value we write.  For TBI, | 
|  | it's the shifted tag bits.  */ | 
|  | value = (start & 0xffff0000) >> 12; | 
|  |  | 
|  | *csr = value; | 
|  | mb(); | 
|  | *csr; | 
|  | } | 
|  |  | 
|  | #ifdef NXM_MACHINE_CHECKS_ON_TSUNAMI | 
|  | static long __init | 
|  | tsunami_probe_read(volatile unsigned long *vaddr) | 
|  | { | 
|  | long dont_care, probe_result; | 
|  | int cpu = smp_processor_id(); | 
|  | int s = swpipl(IPL_MCHECK - 1); | 
|  |  | 
|  | mcheck_taken(cpu) = 0; | 
|  | mcheck_expected(cpu) = 1; | 
|  | mb(); | 
|  | dont_care = *vaddr; | 
|  | draina(); | 
|  | mcheck_expected(cpu) = 0; | 
|  | probe_result = !mcheck_taken(cpu); | 
|  | mcheck_taken(cpu) = 0; | 
|  | setipl(s); | 
|  |  | 
|  | printk("dont_care == 0x%lx\n", dont_care); | 
|  |  | 
|  | return probe_result; | 
|  | } | 
|  |  | 
|  | static long __init | 
|  | tsunami_probe_write(volatile unsigned long *vaddr) | 
|  | { | 
|  | long true_contents, probe_result = 1; | 
|  |  | 
|  | TSUNAMI_cchip->misc.csr |= (1L << 28); /* clear NXM... */ | 
|  | true_contents = *vaddr; | 
|  | *vaddr = 0; | 
|  | draina(); | 
|  | if (TSUNAMI_cchip->misc.csr & (1L << 28)) { | 
|  | int source = (TSUNAMI_cchip->misc.csr >> 29) & 7; | 
|  | TSUNAMI_cchip->misc.csr |= (1L << 28); /* ...and unlock NXS. */ | 
|  | probe_result = 0; | 
|  | printk("tsunami_probe_write: unit %d at 0x%016lx\n", source, | 
|  | (unsigned long)vaddr); | 
|  | } | 
|  | if (probe_result) | 
|  | *vaddr = true_contents; | 
|  | return probe_result; | 
|  | } | 
|  | #else | 
|  | #define tsunami_probe_read(ADDR) 1 | 
|  | #endif /* NXM_MACHINE_CHECKS_ON_TSUNAMI */ | 
|  |  | 
|  | static void __init | 
|  | tsunami_init_one_pchip(tsunami_pchip *pchip, int index) | 
|  | { | 
|  | struct pci_controller *hose; | 
|  |  | 
|  | if (tsunami_probe_read(&pchip->pctl.csr) == 0) | 
|  | return; | 
|  |  | 
|  | hose = alloc_pci_controller(); | 
|  | if (index == 0) | 
|  | pci_isa_hose = hose; | 
|  | hose->io_space = alloc_resource(); | 
|  | hose->mem_space = alloc_resource(); | 
|  |  | 
|  | /* This is for userland consumption.  For some reason, the 40-bit | 
|  | PIO bias that we use in the kernel through KSEG didn't work for | 
|  | the page table based user mappings.  So make sure we get the | 
|  | 43-bit PIO bias.  */ | 
|  | hose->sparse_mem_base = 0; | 
|  | hose->sparse_io_base = 0; | 
|  | hose->dense_mem_base | 
|  | = (TSUNAMI_MEM(index) & 0xffffffffffL) | 0x80000000000L; | 
|  | hose->dense_io_base | 
|  | = (TSUNAMI_IO(index) & 0xffffffffffL) | 0x80000000000L; | 
|  |  | 
|  | hose->config_space_base = TSUNAMI_CONF(index); | 
|  | hose->index = index; | 
|  |  | 
|  | hose->io_space->start = TSUNAMI_IO(index) - TSUNAMI_IO_BIAS; | 
|  | hose->io_space->end = hose->io_space->start + TSUNAMI_IO_SPACE - 1; | 
|  | hose->io_space->name = pci_io_names[index]; | 
|  | hose->io_space->flags = IORESOURCE_IO; | 
|  |  | 
|  | hose->mem_space->start = TSUNAMI_MEM(index) - TSUNAMI_MEM_BIAS; | 
|  | hose->mem_space->end = hose->mem_space->start + 0xffffffff; | 
|  | hose->mem_space->name = pci_mem_names[index]; | 
|  | hose->mem_space->flags = IORESOURCE_MEM; | 
|  |  | 
|  | if (request_resource(&ioport_resource, hose->io_space) < 0) | 
|  | printk(KERN_ERR "Failed to request IO on hose %d\n", index); | 
|  | if (request_resource(&iomem_resource, hose->mem_space) < 0) | 
|  | printk(KERN_ERR "Failed to request MEM on hose %d\n", index); | 
|  |  | 
|  | /* | 
|  | * Save the existing PCI window translations.  SRM will | 
|  | * need them when we go to reboot. | 
|  | */ | 
|  |  | 
|  | saved_config[index].wsba[0] = pchip->wsba[0].csr; | 
|  | saved_config[index].wsm[0] = pchip->wsm[0].csr; | 
|  | saved_config[index].tba[0] = pchip->tba[0].csr; | 
|  |  | 
|  | saved_config[index].wsba[1] = pchip->wsba[1].csr; | 
|  | saved_config[index].wsm[1] = pchip->wsm[1].csr; | 
|  | saved_config[index].tba[1] = pchip->tba[1].csr; | 
|  |  | 
|  | saved_config[index].wsba[2] = pchip->wsba[2].csr; | 
|  | saved_config[index].wsm[2] = pchip->wsm[2].csr; | 
|  | saved_config[index].tba[2] = pchip->tba[2].csr; | 
|  |  | 
|  | saved_config[index].wsba[3] = pchip->wsba[3].csr; | 
|  | saved_config[index].wsm[3] = pchip->wsm[3].csr; | 
|  | saved_config[index].tba[3] = pchip->tba[3].csr; | 
|  |  | 
|  | /* | 
|  | * Set up the PCI to main memory translation windows. | 
|  | * | 
|  | * Note: Window 3 is scatter-gather only | 
|  | * | 
|  | * Window 0 is scatter-gather 8MB at 8MB (for isa) | 
|  | * Window 1 is scatter-gather (up to) 1GB at 1GB | 
|  | * Window 2 is direct access 2GB at 2GB | 
|  | * | 
|  | * NOTE: we need the align_entry settings for Acer devices on ES40, | 
|  | * specifically floppy and IDE when memory is larger than 2GB. | 
|  | */ | 
|  | hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000, 0); | 
|  | /* Initially set for 4 PTEs, but will be overridden to 64K for ISA. */ | 
|  | hose->sg_isa->align_entry = 4; | 
|  |  | 
|  | hose->sg_pci = iommu_arena_new(hose, 0x40000000, | 
|  | size_for_memory(0x40000000), 0); | 
|  | hose->sg_pci->align_entry = 4; /* Tsunami caches 4 PTEs at a time */ | 
|  |  | 
|  | __direct_map_base = 0x80000000; | 
|  | __direct_map_size = 0x80000000; | 
|  |  | 
|  | pchip->wsba[0].csr = hose->sg_isa->dma_base | 3; | 
|  | pchip->wsm[0].csr  = (hose->sg_isa->size - 1) & 0xfff00000; | 
|  | pchip->tba[0].csr  = virt_to_phys(hose->sg_isa->ptes); | 
|  |  | 
|  | pchip->wsba[1].csr = hose->sg_pci->dma_base | 3; | 
|  | pchip->wsm[1].csr  = (hose->sg_pci->size - 1) & 0xfff00000; | 
|  | pchip->tba[1].csr  = virt_to_phys(hose->sg_pci->ptes); | 
|  |  | 
|  | pchip->wsba[2].csr = 0x80000000 | 1; | 
|  | pchip->wsm[2].csr  = (0x80000000 - 1) & 0xfff00000; | 
|  | pchip->tba[2].csr  = 0; | 
|  |  | 
|  | pchip->wsba[3].csr = 0; | 
|  |  | 
|  | /* Enable the Monster Window to make DAC pci64 possible. */ | 
|  | pchip->pctl.csr |= pctl_m_mwin; | 
|  |  | 
|  | tsunami_pci_tbi(hose, 0, -1); | 
|  | } | 
|  |  | 
|  |  | 
|  | void __iomem * | 
|  | tsunami_ioportmap(unsigned long addr) | 
|  | { | 
|  | FIXUP_IOADDR_VGA(addr); | 
|  | return (void __iomem *)(addr + TSUNAMI_IO_BIAS); | 
|  | } | 
|  |  | 
|  | void __iomem * | 
|  | tsunami_ioremap(unsigned long addr, unsigned long size) | 
|  | { | 
|  | FIXUP_MEMADDR_VGA(addr); | 
|  | return (void __iomem *)(addr + TSUNAMI_MEM_BIAS); | 
|  | } | 
|  |  | 
|  | #ifndef CONFIG_ALPHA_GENERIC | 
|  | EXPORT_SYMBOL(tsunami_ioportmap); | 
|  | EXPORT_SYMBOL(tsunami_ioremap); | 
|  | #endif | 
|  |  | 
|  | void __init | 
|  | tsunami_init_arch(void) | 
|  | { | 
|  | #ifdef NXM_MACHINE_CHECKS_ON_TSUNAMI | 
|  | unsigned long tmp; | 
|  |  | 
|  | /* Ho hum.. init_arch is called before init_IRQ, but we need to be | 
|  | able to handle machine checks.  So install the handler now.  */ | 
|  | wrent(entInt, 0); | 
|  |  | 
|  | /* NXMs just don't matter to Tsunami--unless they make it | 
|  | choke completely. */ | 
|  | tmp = (unsigned long)(TSUNAMI_cchip - 1); | 
|  | printk("%s: probing bogus address:  0x%016lx\n", __func__, bogus_addr); | 
|  | printk("\tprobe %s\n", | 
|  | tsunami_probe_write((unsigned long *)bogus_addr) | 
|  | ? "succeeded" : "failed"); | 
|  | #endif /* NXM_MACHINE_CHECKS_ON_TSUNAMI */ | 
|  |  | 
|  | #if 0 | 
|  | printk("%s: CChip registers:\n", __func__); | 
|  | printk("%s: CSR_CSC 0x%lx\n", __func__, TSUNAMI_cchip->csc.csr); | 
|  | printk("%s: CSR_MTR 0x%lx\n", __func__, TSUNAMI_cchip.mtr.csr); | 
|  | printk("%s: CSR_MISC 0x%lx\n", __func__, TSUNAMI_cchip->misc.csr); | 
|  | printk("%s: CSR_DIM0 0x%lx\n", __func__, TSUNAMI_cchip->dim0.csr); | 
|  | printk("%s: CSR_DIM1 0x%lx\n", __func__, TSUNAMI_cchip->dim1.csr); | 
|  | printk("%s: CSR_DIR0 0x%lx\n", __func__, TSUNAMI_cchip->dir0.csr); | 
|  | printk("%s: CSR_DIR1 0x%lx\n", __func__, TSUNAMI_cchip->dir1.csr); | 
|  | printk("%s: CSR_DRIR 0x%lx\n", __func__, TSUNAMI_cchip->drir.csr); | 
|  |  | 
|  | printk("%s: DChip registers:\n"); | 
|  | printk("%s: CSR_DSC 0x%lx\n", __func__, TSUNAMI_dchip->dsc.csr); | 
|  | printk("%s: CSR_STR 0x%lx\n", __func__, TSUNAMI_dchip->str.csr); | 
|  | printk("%s: CSR_DREV 0x%lx\n", __func__, TSUNAMI_dchip->drev.csr); | 
|  | #endif | 
|  | /* With multiple PCI busses, we play with I/O as physical addrs.  */ | 
|  | ioport_resource.end = ~0UL; | 
|  |  | 
|  | /* Find how many hoses we have, and initialize them.  TSUNAMI | 
|  | and TYPHOON can have 2, but might only have 1 (DS10).  */ | 
|  |  | 
|  | tsunami_init_one_pchip(TSUNAMI_pchip0, 0); | 
|  | if (TSUNAMI_cchip->csc.csr & 1L<<14) | 
|  | tsunami_init_one_pchip(TSUNAMI_pchip1, 1); | 
|  |  | 
|  | /* Check for graphic console location (if any).  */ | 
|  | find_console_vga_hose(); | 
|  | } | 
|  |  | 
|  | static void | 
|  | tsunami_kill_one_pchip(tsunami_pchip *pchip, int index) | 
|  | { | 
|  | pchip->wsba[0].csr = saved_config[index].wsba[0]; | 
|  | pchip->wsm[0].csr = saved_config[index].wsm[0]; | 
|  | pchip->tba[0].csr = saved_config[index].tba[0]; | 
|  |  | 
|  | pchip->wsba[1].csr = saved_config[index].wsba[1]; | 
|  | pchip->wsm[1].csr = saved_config[index].wsm[1]; | 
|  | pchip->tba[1].csr = saved_config[index].tba[1]; | 
|  |  | 
|  | pchip->wsba[2].csr = saved_config[index].wsba[2]; | 
|  | pchip->wsm[2].csr = saved_config[index].wsm[2]; | 
|  | pchip->tba[2].csr = saved_config[index].tba[2]; | 
|  |  | 
|  | pchip->wsba[3].csr = saved_config[index].wsba[3]; | 
|  | pchip->wsm[3].csr = saved_config[index].wsm[3]; | 
|  | pchip->tba[3].csr = saved_config[index].tba[3]; | 
|  | } | 
|  |  | 
|  | void | 
|  | tsunami_kill_arch(int mode) | 
|  | { | 
|  | tsunami_kill_one_pchip(TSUNAMI_pchip0, 0); | 
|  | if (TSUNAMI_cchip->csc.csr & 1L<<14) | 
|  | tsunami_kill_one_pchip(TSUNAMI_pchip1, 1); | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | tsunami_pci_clr_err_1(tsunami_pchip *pchip) | 
|  | { | 
|  | pchip->perror.csr; | 
|  | pchip->perror.csr = 0x040; | 
|  | mb(); | 
|  | pchip->perror.csr; | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | tsunami_pci_clr_err(void) | 
|  | { | 
|  | tsunami_pci_clr_err_1(TSUNAMI_pchip0); | 
|  |  | 
|  | /* TSUNAMI and TYPHOON can have 2, but might only have 1 (DS10) */ | 
|  | if (TSUNAMI_cchip->csc.csr & 1L<<14) | 
|  | tsunami_pci_clr_err_1(TSUNAMI_pchip1); | 
|  | } | 
|  |  | 
|  | void | 
|  | tsunami_machine_check(unsigned long vector, unsigned long la_ptr) | 
|  | { | 
|  | /* Clear error before any reporting.  */ | 
|  | mb(); | 
|  | mb();  /* magic */ | 
|  | draina(); | 
|  | tsunami_pci_clr_err(); | 
|  | wrmces(0x7); | 
|  | mb(); | 
|  |  | 
|  | process_mcheck_info(vector, la_ptr, "TSUNAMI", | 
|  | mcheck_expected(smp_processor_id())); | 
|  | } |