|  | #include <dt-bindings/interrupt-controller/arm-gic.h> | 
|  |  | 
|  | #include "skeleton.dtsi" | 
|  |  | 
|  | / { | 
|  | #address-cells = <2>; | 
|  | #size-cells = <2>; | 
|  | model = "Broadcom STB (bcm7445)"; | 
|  | compatible = "brcm,bcm7445", "brcm,brcmstb"; | 
|  | interrupt-parent = <&gic>; | 
|  |  | 
|  | chosen { | 
|  | bootargs = "console=ttyS0,115200 earlyprintk"; | 
|  | }; | 
|  |  | 
|  | cpus { | 
|  | #address-cells = <1>; | 
|  | #size-cells = <0>; | 
|  |  | 
|  | cpu@0 { | 
|  | compatible = "brcm,brahma-b15"; | 
|  | device_type = "cpu"; | 
|  | enable-method = "brcm,brahma-b15"; | 
|  | reg = <0>; | 
|  | }; | 
|  |  | 
|  | cpu@1 { | 
|  | compatible = "brcm,brahma-b15"; | 
|  | device_type = "cpu"; | 
|  | enable-method = "brcm,brahma-b15"; | 
|  | reg = <1>; | 
|  | }; | 
|  |  | 
|  | cpu@2 { | 
|  | compatible = "brcm,brahma-b15"; | 
|  | device_type = "cpu"; | 
|  | enable-method = "brcm,brahma-b15"; | 
|  | reg = <2>; | 
|  | }; | 
|  |  | 
|  | cpu@3 { | 
|  | compatible = "brcm,brahma-b15"; | 
|  | device_type = "cpu"; | 
|  | enable-method = "brcm,brahma-b15"; | 
|  | reg = <3>; | 
|  | }; | 
|  | }; | 
|  |  | 
|  | gic: interrupt-controller@ffd00000 { | 
|  | compatible = "brcm,brahma-b15-gic", "arm,cortex-a15-gic"; | 
|  | reg = <0x00 0xffd01000 0x00 0x1000>, | 
|  | <0x00 0xffd02000 0x00 0x2000>, | 
|  | <0x00 0xffd04000 0x00 0x2000>, | 
|  | <0x00 0xffd06000 0x00 0x2000>; | 
|  | interrupt-controller; | 
|  | #interrupt-cells = <3>; | 
|  | }; | 
|  |  | 
|  | timer { | 
|  | compatible = "arm,armv7-timer"; | 
|  | interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, | 
|  | <GIC_PPI 14 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, | 
|  | <GIC_PPI 11 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, | 
|  | <GIC_PPI 10 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>; | 
|  | }; | 
|  |  | 
|  | rdb { | 
|  | #address-cells = <1>; | 
|  | #size-cells = <1>; | 
|  | compatible = "simple-bus"; | 
|  | ranges = <0 0x00 0xf0000000 0x1000000>; | 
|  |  | 
|  | serial@40ab00 { | 
|  | compatible = "ns16550a"; | 
|  | reg = <0x40ab00 0x20>; | 
|  | reg-shift = <2>; | 
|  | reg-io-width = <4>; | 
|  | interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; | 
|  | clock-frequency = <81000000>; | 
|  | }; | 
|  |  | 
|  | sun_top_ctrl: syscon@404000 { | 
|  | compatible = "brcm,bcm7445-sun-top-ctrl", | 
|  | "syscon"; | 
|  | reg = <0x404000 0x51c>; | 
|  | }; | 
|  |  | 
|  | hif_cpubiuctrl: syscon@3e2400 { | 
|  | compatible = "brcm,bcm7445-hif-cpubiuctrl", | 
|  | "syscon"; | 
|  | reg = <0x3e2400 0x5b4>; | 
|  | }; | 
|  |  | 
|  | hif_continuation: syscon@452000 { | 
|  | compatible = "brcm,bcm7445-hif-continuation", | 
|  | "syscon"; | 
|  | reg = <0x452000 0x100>; | 
|  | }; | 
|  |  | 
|  | irq0_intc: interrupt-controller@40a780 { | 
|  | compatible = "brcm,bcm7120-l2-intc"; | 
|  | interrupt-parent = <&gic>; | 
|  | #interrupt-cells = <1>; | 
|  | reg = <0x40a780 0x8>; | 
|  | interrupt-controller; | 
|  | interrupts = <GIC_SPI 0x45 0x0>, | 
|  | <GIC_SPI 0x43 0x0>; | 
|  | brcm,int-map-mask = <0x25c>, <0x7000000>; | 
|  | brcm,int-fwd-mask = <0x70000>; | 
|  | }; | 
|  | }; | 
|  |  | 
|  | smpboot { | 
|  | compatible = "brcm,brcmstb-smpboot"; | 
|  | syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>; | 
|  | syscon-cont = <&hif_continuation>; | 
|  | }; | 
|  |  | 
|  | reboot { | 
|  | compatible = "brcm,brcmstb-reboot"; | 
|  | syscon = <&sun_top_ctrl 0x304 0x308>; | 
|  | }; | 
|  | }; |