|  | /* | 
|  | * Copyright 2004-2009 Analog Devices Inc. | 
|  | *           2008-2009 Cambridge Signal Processing | 
|  | *                2005 National ICT Australia (NICTA) | 
|  | *                      Aidan Williams <aidan@nicta.com.au> | 
|  | * | 
|  | * Licensed under the GPL-2 or later. | 
|  | */ | 
|  |  | 
|  | #include <linux/device.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/mtd/mtd.h> | 
|  | #include <linux/mtd/partitions.h> | 
|  | #include <linux/spi/spi.h> | 
|  | #include <linux/spi/flash.h> | 
|  | #if IS_ENABLED(CONFIG_USB_ISP1362_HCD) | 
|  | #include <linux/usb/isp1362.h> | 
|  | #endif | 
|  | #include <linux/ata_platform.h> | 
|  | #include <linux/irq.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/usb/sl811.h> | 
|  | #include <asm/dma.h> | 
|  | #include <asm/bfin5xx_spi.h> | 
|  | #include <asm/reboot.h> | 
|  | #include <asm/portmux.h> | 
|  | #include <linux/spi/ad7877.h> | 
|  |  | 
|  | /* | 
|  | * Name the Board for the /proc/cpuinfo | 
|  | */ | 
|  | const char bfin_board_name[] = "CamSig Minotaur BF537"; | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) | 
|  | static struct resource bfin_pcmcia_cf_resources[] = { | 
|  | { | 
|  | .start = 0x20310000, /* IO PORT */ | 
|  | .end = 0x20312000, | 
|  | .flags = IORESOURCE_MEM, | 
|  | }, { | 
|  | .start = 0x20311000, /* Attribute Memory */ | 
|  | .end = 0x20311FFF, | 
|  | .flags = IORESOURCE_MEM, | 
|  | }, { | 
|  | .start = IRQ_PF4, | 
|  | .end = IRQ_PF4, | 
|  | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, | 
|  | }, { | 
|  | .start = IRQ_PF6, /* Card Detect PF6 */ | 
|  | .end = IRQ_PF6, | 
|  | .flags = IORESOURCE_IRQ, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct platform_device bfin_pcmcia_cf_device = { | 
|  | .name = "bfin_cf_pcmcia", | 
|  | .id = -1, | 
|  | .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources), | 
|  | .resource = bfin_pcmcia_cf_resources, | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_RTC_DRV_BFIN) | 
|  | static struct platform_device rtc_device = { | 
|  | .name = "rtc-bfin", | 
|  | .id   = -1, | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_BFIN_MAC) | 
|  | #include <linux/bfin_mac.h> | 
|  | static const unsigned short bfin_mac_peripherals[] = P_MII0; | 
|  |  | 
|  | static struct bfin_phydev_platform_data bfin_phydev_data[] = { | 
|  | { | 
|  | .addr = 1, | 
|  | .irq = IRQ_MAC_PHYINT, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct bfin_mii_bus_platform_data bfin_mii_bus_data = { | 
|  | .phydev_number = 1, | 
|  | .phydev_data = bfin_phydev_data, | 
|  | .phy_mode = PHY_INTERFACE_MODE_MII, | 
|  | .mac_peripherals = bfin_mac_peripherals, | 
|  | }; | 
|  |  | 
|  | static struct platform_device bfin_mii_bus = { | 
|  | .name = "bfin_mii_bus", | 
|  | .dev = { | 
|  | .platform_data = &bfin_mii_bus_data, | 
|  | } | 
|  | }; | 
|  |  | 
|  | static struct platform_device bfin_mac_device = { | 
|  | .name = "bfin_mac", | 
|  | .dev = { | 
|  | .platform_data = &bfin_mii_bus, | 
|  | } | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_USB_NET2272) | 
|  | static struct resource net2272_bfin_resources[] = { | 
|  | { | 
|  | .start = 0x20300000, | 
|  | .end = 0x20300000 + 0x100, | 
|  | .flags = IORESOURCE_MEM, | 
|  | }, { | 
|  | .start = IRQ_PF7, | 
|  | .end = IRQ_PF7, | 
|  | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct platform_device net2272_bfin_device = { | 
|  | .name = "net2272", | 
|  | .id = -1, | 
|  | .num_resources = ARRAY_SIZE(net2272_bfin_resources), | 
|  | .resource = net2272_bfin_resources, | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_SPI_BFIN5XX) | 
|  | /* all SPI peripherals info goes here */ | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_MTD_M25P80) | 
|  |  | 
|  | /* Partition sizes */ | 
|  | #define FLASH_SIZE       0x00400000 | 
|  | #define PSIZE_UBOOT      0x00030000 | 
|  | #define PSIZE_INITRAMFS  0x00240000 | 
|  |  | 
|  | static struct mtd_partition bfin_spi_flash_partitions[] = { | 
|  | { | 
|  | .name       = "bootloader(spi)", | 
|  | .size       = PSIZE_UBOOT, | 
|  | .offset     = 0x000000, | 
|  | .mask_flags = MTD_CAP_ROM | 
|  | }, { | 
|  | .name       = "initramfs(spi)", | 
|  | .size       = PSIZE_INITRAMFS, | 
|  | .offset     = PSIZE_UBOOT | 
|  | }, { | 
|  | .name       = "opt(spi)", | 
|  | .size       = FLASH_SIZE - (PSIZE_UBOOT + PSIZE_INITRAMFS), | 
|  | .offset     = PSIZE_UBOOT + PSIZE_INITRAMFS, | 
|  | } | 
|  | }; | 
|  |  | 
|  | static struct flash_platform_data bfin_spi_flash_data = { | 
|  | .name = "m25p80", | 
|  | .parts = bfin_spi_flash_partitions, | 
|  | .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), | 
|  | .type = "m25p64", | 
|  | }; | 
|  |  | 
|  | /* SPI flash chip (m25p64) */ | 
|  | static struct bfin5xx_spi_chip spi_flash_chip_info = { | 
|  | .enable_dma = 0,         /* use dma transfer with this chip*/ | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_MMC_SPI) | 
|  | static struct bfin5xx_spi_chip mmc_spi_chip_info = { | 
|  | .enable_dma = 0, | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | static struct spi_board_info bfin_spi_board_info[] __initdata = { | 
|  | #if IS_ENABLED(CONFIG_MTD_M25P80) | 
|  | { | 
|  | /* the modalias must be the same as spi device driver name */ | 
|  | .modalias = "m25p80", /* Name of spi_driver for this device */ | 
|  | .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */ | 
|  | .bus_num = 0, /* Framework bus number */ | 
|  | .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ | 
|  | .platform_data = &bfin_spi_flash_data, | 
|  | .controller_data = &spi_flash_chip_info, | 
|  | .mode = SPI_MODE_3, | 
|  | }, | 
|  | #endif | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_MMC_SPI) | 
|  | { | 
|  | .modalias = "mmc_spi", | 
|  | .max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */ | 
|  | .bus_num = 0, | 
|  | .chip_select = 5, | 
|  | .controller_data = &mmc_spi_chip_info, | 
|  | .mode = SPI_MODE_3, | 
|  | }, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | /* SPI controller data */ | 
|  | static struct bfin5xx_spi_master bfin_spi0_info = { | 
|  | .num_chipselect = 8, | 
|  | .enable_dma = 1,  /* master has the ability to do dma transfer */ | 
|  | }; | 
|  |  | 
|  | /* SPI (0) */ | 
|  | static struct resource bfin_spi0_resource[] = { | 
|  | [0] = { | 
|  | .start = SPI0_REGBASE, | 
|  | .end   = SPI0_REGBASE + 0xFF, | 
|  | .flags = IORESOURCE_MEM, | 
|  | }, | 
|  | [1] = { | 
|  | .start = CH_SPI, | 
|  | .end   = CH_SPI, | 
|  | .flags = IORESOURCE_DMA, | 
|  | }, | 
|  | [2] = { | 
|  | .start = IRQ_SPI, | 
|  | .end   = IRQ_SPI, | 
|  | .flags = IORESOURCE_IRQ, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct platform_device bfin_spi0_device = { | 
|  | .name = "bfin-spi", | 
|  | .id = 0, /* Bus number */ | 
|  | .num_resources = ARRAY_SIZE(bfin_spi0_resource), | 
|  | .resource = bfin_spi0_resource, | 
|  | .dev = { | 
|  | .platform_data = &bfin_spi0_info, /* Passed to driver */ | 
|  | }, | 
|  | }; | 
|  | #endif  /* spi master and devices */ | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_SERIAL_BFIN) | 
|  | #ifdef CONFIG_SERIAL_BFIN_UART0 | 
|  | static struct resource bfin_uart0_resources[] = { | 
|  | { | 
|  | .start = UART0_THR, | 
|  | .end = UART0_GCTL+2, | 
|  | .flags = IORESOURCE_MEM, | 
|  | }, | 
|  | { | 
|  | .start = IRQ_UART0_TX, | 
|  | .end = IRQ_UART0_TX, | 
|  | .flags = IORESOURCE_IRQ, | 
|  | }, | 
|  | { | 
|  | .start = IRQ_UART0_RX, | 
|  | .end = IRQ_UART0_RX, | 
|  | .flags = IORESOURCE_IRQ, | 
|  | }, | 
|  | { | 
|  | .start = IRQ_UART0_ERROR, | 
|  | .end = IRQ_UART0_ERROR, | 
|  | .flags = IORESOURCE_IRQ, | 
|  | }, | 
|  | { | 
|  | .start = CH_UART0_TX, | 
|  | .end = CH_UART0_TX, | 
|  | .flags = IORESOURCE_DMA, | 
|  | }, | 
|  | { | 
|  | .start = CH_UART0_RX, | 
|  | .end = CH_UART0_RX, | 
|  | .flags = IORESOURCE_DMA, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static unsigned short bfin_uart0_peripherals[] = { | 
|  | P_UART0_TX, P_UART0_RX, 0 | 
|  | }; | 
|  |  | 
|  | static struct platform_device bfin_uart0_device = { | 
|  | .name = "bfin-uart", | 
|  | .id = 0, | 
|  | .num_resources = ARRAY_SIZE(bfin_uart0_resources), | 
|  | .resource = bfin_uart0_resources, | 
|  | .dev = { | 
|  | .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ | 
|  | }, | 
|  | }; | 
|  | #endif | 
|  | #ifdef CONFIG_SERIAL_BFIN_UART1 | 
|  | static struct resource bfin_uart1_resources[] = { | 
|  | { | 
|  | .start = UART1_THR, | 
|  | .end = UART1_GCTL+2, | 
|  | .flags = IORESOURCE_MEM, | 
|  | }, | 
|  | { | 
|  | .start = IRQ_UART1_TX, | 
|  | .end = IRQ_UART1_TX, | 
|  | .flags = IORESOURCE_IRQ, | 
|  | }, | 
|  | { | 
|  | .start = IRQ_UART1_RX, | 
|  | .end = IRQ_UART1_RX, | 
|  | .flags = IORESOURCE_IRQ, | 
|  | }, | 
|  | { | 
|  | .start = IRQ_UART1_ERROR, | 
|  | .end = IRQ_UART1_ERROR, | 
|  | .flags = IORESOURCE_IRQ, | 
|  | }, | 
|  | { | 
|  | .start = CH_UART1_TX, | 
|  | .end = CH_UART1_TX, | 
|  | .flags = IORESOURCE_DMA, | 
|  | }, | 
|  | { | 
|  | .start = CH_UART1_RX, | 
|  | .end = CH_UART1_RX, | 
|  | .flags = IORESOURCE_DMA, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static unsigned short bfin_uart1_peripherals[] = { | 
|  | P_UART1_TX, P_UART1_RX, 0 | 
|  | }; | 
|  |  | 
|  | static struct platform_device bfin_uart1_device = { | 
|  | .name = "bfin-uart", | 
|  | .id = 1, | 
|  | .num_resources = ARRAY_SIZE(bfin_uart1_resources), | 
|  | .resource = bfin_uart1_resources, | 
|  | .dev = { | 
|  | .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ | 
|  | }, | 
|  | }; | 
|  | #endif | 
|  | #endif | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_BFIN_SIR) | 
|  | #ifdef CONFIG_BFIN_SIR0 | 
|  | static struct resource bfin_sir0_resources[] = { | 
|  | { | 
|  | .start = 0xFFC00400, | 
|  | .end = 0xFFC004FF, | 
|  | .flags = IORESOURCE_MEM, | 
|  | }, | 
|  | { | 
|  | .start = IRQ_UART0_RX, | 
|  | .end = IRQ_UART0_RX+1, | 
|  | .flags = IORESOURCE_IRQ, | 
|  | }, | 
|  | { | 
|  | .start = CH_UART0_RX, | 
|  | .end = CH_UART0_RX+1, | 
|  | .flags = IORESOURCE_DMA, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct platform_device bfin_sir0_device = { | 
|  | .name = "bfin_sir", | 
|  | .id = 0, | 
|  | .num_resources = ARRAY_SIZE(bfin_sir0_resources), | 
|  | .resource = bfin_sir0_resources, | 
|  | }; | 
|  | #endif | 
|  | #ifdef CONFIG_BFIN_SIR1 | 
|  | static struct resource bfin_sir1_resources[] = { | 
|  | { | 
|  | .start = 0xFFC02000, | 
|  | .end = 0xFFC020FF, | 
|  | .flags = IORESOURCE_MEM, | 
|  | }, | 
|  | { | 
|  | .start = IRQ_UART1_RX, | 
|  | .end = IRQ_UART1_RX+1, | 
|  | .flags = IORESOURCE_IRQ, | 
|  | }, | 
|  | { | 
|  | .start = CH_UART1_RX, | 
|  | .end = CH_UART1_RX+1, | 
|  | .flags = IORESOURCE_DMA, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct platform_device bfin_sir1_device = { | 
|  | .name = "bfin_sir", | 
|  | .id = 1, | 
|  | .num_resources = ARRAY_SIZE(bfin_sir1_resources), | 
|  | .resource = bfin_sir1_resources, | 
|  | }; | 
|  | #endif | 
|  | #endif | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) | 
|  | static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; | 
|  |  | 
|  | static struct resource bfin_twi0_resource[] = { | 
|  | [0] = { | 
|  | .start = TWI0_REGBASE, | 
|  | .end   = TWI0_REGBASE + 0xFF, | 
|  | .flags = IORESOURCE_MEM, | 
|  | }, | 
|  | [1] = { | 
|  | .start = IRQ_TWI, | 
|  | .end   = IRQ_TWI, | 
|  | .flags = IORESOURCE_IRQ, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct platform_device i2c_bfin_twi_device = { | 
|  | .name = "i2c-bfin-twi", | 
|  | .id = 0, | 
|  | .num_resources = ARRAY_SIZE(bfin_twi0_resource), | 
|  | .resource = bfin_twi0_resource, | 
|  | .dev = { | 
|  | .platform_data = &bfin_twi0_pins, | 
|  | }, | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) | 
|  | #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART | 
|  | static struct resource bfin_sport0_uart_resources[] = { | 
|  | { | 
|  | .start = SPORT0_TCR1, | 
|  | .end = SPORT0_MRCS3+4, | 
|  | .flags = IORESOURCE_MEM, | 
|  | }, | 
|  | { | 
|  | .start = IRQ_SPORT0_RX, | 
|  | .end = IRQ_SPORT0_RX+1, | 
|  | .flags = IORESOURCE_IRQ, | 
|  | }, | 
|  | { | 
|  | .start = IRQ_SPORT0_ERROR, | 
|  | .end = IRQ_SPORT0_ERROR, | 
|  | .flags = IORESOURCE_IRQ, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static unsigned short bfin_sport0_peripherals[] = { | 
|  | P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, | 
|  | P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0 | 
|  | }; | 
|  |  | 
|  | static struct platform_device bfin_sport0_uart_device = { | 
|  | .name = "bfin-sport-uart", | 
|  | .id = 0, | 
|  | .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), | 
|  | .resource = bfin_sport0_uart_resources, | 
|  | .dev = { | 
|  | .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ | 
|  | }, | 
|  | }; | 
|  | #endif | 
|  | #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART | 
|  | static struct resource bfin_sport1_uart_resources[] = { | 
|  | { | 
|  | .start = SPORT1_TCR1, | 
|  | .end = SPORT1_MRCS3+4, | 
|  | .flags = IORESOURCE_MEM, | 
|  | }, | 
|  | { | 
|  | .start = IRQ_SPORT1_RX, | 
|  | .end = IRQ_SPORT1_RX+1, | 
|  | .flags = IORESOURCE_IRQ, | 
|  | }, | 
|  | { | 
|  | .start = IRQ_SPORT1_ERROR, | 
|  | .end = IRQ_SPORT1_ERROR, | 
|  | .flags = IORESOURCE_IRQ, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static unsigned short bfin_sport1_peripherals[] = { | 
|  | P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, | 
|  | P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0 | 
|  | }; | 
|  |  | 
|  | static struct platform_device bfin_sport1_uart_device = { | 
|  | .name = "bfin-sport-uart", | 
|  | .id = 1, | 
|  | .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), | 
|  | .resource = bfin_sport1_uart_resources, | 
|  | .dev = { | 
|  | .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ | 
|  | }, | 
|  | }; | 
|  | #endif | 
|  | #endif | 
|  |  | 
|  | static struct platform_device *minotaur_devices[] __initdata = { | 
|  | #if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) | 
|  | &bfin_pcmcia_cf_device, | 
|  | #endif | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_RTC_DRV_BFIN) | 
|  | &rtc_device, | 
|  | #endif | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_BFIN_MAC) | 
|  | &bfin_mii_bus, | 
|  | &bfin_mac_device, | 
|  | #endif | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_USB_NET2272) | 
|  | &net2272_bfin_device, | 
|  | #endif | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_SPI_BFIN5XX) | 
|  | &bfin_spi0_device, | 
|  | #endif | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_SERIAL_BFIN) | 
|  | #ifdef CONFIG_SERIAL_BFIN_UART0 | 
|  | &bfin_uart0_device, | 
|  | #endif | 
|  | #ifdef CONFIG_SERIAL_BFIN_UART1 | 
|  | &bfin_uart1_device, | 
|  | #endif | 
|  | #endif | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_BFIN_SIR) | 
|  | #ifdef CONFIG_BFIN_SIR0 | 
|  | &bfin_sir0_device, | 
|  | #endif | 
|  | #ifdef CONFIG_BFIN_SIR1 | 
|  | &bfin_sir1_device, | 
|  | #endif | 
|  | #endif | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) | 
|  | &i2c_bfin_twi_device, | 
|  | #endif | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) | 
|  | #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART | 
|  | &bfin_sport0_uart_device, | 
|  | #endif | 
|  | #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART | 
|  | &bfin_sport1_uart_device, | 
|  | #endif | 
|  | #endif | 
|  |  | 
|  | }; | 
|  |  | 
|  | static int __init minotaur_init(void) | 
|  | { | 
|  | printk(KERN_INFO "%s(): registering device resources\n", __func__); | 
|  | platform_add_devices(minotaur_devices, ARRAY_SIZE(minotaur_devices)); | 
|  | #if IS_ENABLED(CONFIG_SPI_BFIN5XX) | 
|  | spi_register_board_info(bfin_spi_board_info, | 
|  | ARRAY_SIZE(bfin_spi_board_info)); | 
|  | #endif | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | arch_initcall(minotaur_init); | 
|  |  | 
|  | static struct platform_device *minotaur_early_devices[] __initdata = { | 
|  | #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) | 
|  | #ifdef CONFIG_SERIAL_BFIN_UART0 | 
|  | &bfin_uart0_device, | 
|  | #endif | 
|  | #ifdef CONFIG_SERIAL_BFIN_UART1 | 
|  | &bfin_uart1_device, | 
|  | #endif | 
|  | #endif | 
|  |  | 
|  | #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) | 
|  | #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART | 
|  | &bfin_sport0_uart_device, | 
|  | #endif | 
|  | #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART | 
|  | &bfin_sport1_uart_device, | 
|  | #endif | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | void __init native_machine_early_platform_add_devices(void) | 
|  | { | 
|  | printk(KERN_INFO "register early platform devices\n"); | 
|  | early_platform_add_devices(minotaur_early_devices, | 
|  | ARRAY_SIZE(minotaur_early_devices)); | 
|  | } | 
|  |  | 
|  | void native_machine_restart(char *cmd) | 
|  | { | 
|  | /* workaround reboot hang when booting from SPI */ | 
|  | if ((bfin_read_SYSCR() & 0x7) == 0x3) | 
|  | bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); | 
|  | } |