arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi

/*
 * P4080/P4040 Silicon/SoC Device Tree Source (pre include)
 *
 * Copyright 2011 Freescale Semiconductor Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in the
 *       documentation and/or other materials provided with the distribution.
 *     * Neither the name of Freescale Semiconductor nor the
 *       names of its contributors may be used to endorse or promote products
 *       derived from this software without specific prior written permission.
 *
 *
 * ALTERNATIVELY, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") as published by the Free Software
 * Foundation, either version 2 of that License or (at your option) any
 * later version.
 *
 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/dts-v1/;

/include/ "e500mc_power_isa.dtsi"

/ {
	compatible = "fsl,P4080";
	#address-cells = <2>;
	#size-cells = <2>;
	interrupt-parent = <&mpic>;

	aliases {
		ccsr = &soc;
		dcsr = &dcsr;

		serial0 = &serial0;
		serial1 = &serial1;
		serial2 = &serial2;
		serial3 = &serial3;
		pci0 = &pci0;
		pci1 = &pci1;
		pci2 = &pci2;
		usb0 = &usb0;
		usb1 = &usb1;
		dma0 = &dma0;
		dma1 = &dma1;
		sdhc = &sdhc;
		msi0 = &msi0;
		msi1 = &msi1;
		msi2 = &msi2;

		crypto = &crypto;
		sec_jr0 = &sec_jr0;
		sec_jr1 = &sec_jr1;
		sec_jr2 = &sec_jr2;
		sec_jr3 = &sec_jr3;
		rtic_a = &rtic_a;
		rtic_b = &rtic_b;
		rtic_c = &rtic_c;
		rtic_d = &rtic_d;
		sec_mon = &sec_mon;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu0: PowerPC,e500mc@0 {
			device_type = "cpu";
			reg = <0>;
			clocks = <&mux0>;
			next-level-cache = <&L2_0>;
			fsl,portid-mapping = <0x80000000>;
			L2_0: l2-cache {
				next-level-cache = <&cpc>;
			};
		};
		cpu1: PowerPC,e500mc@1 {
			device_type = "cpu";
			reg = <1>;
			clocks = <&mux1>;
			next-level-cache = <&L2_1>;
			fsl,portid-mapping = <0x40000000>;
			L2_1: l2-cache {
				next-level-cache = <&cpc>;
			};
		};
		cpu2: PowerPC,e500mc@2 {
			device_type = "cpu";
			reg = <2>;
			clocks = <&mux2>;
			next-level-cache = <&L2_2>;
			fsl,portid-mapping = <0x20000000>;
			L2_2: l2-cache {
				next-level-cache = <&cpc>;
			};
		};
		cpu3: PowerPC,e500mc@3 {
			device_type = "cpu";
			reg = <3>;
			clocks = <&mux3>;
			next-level-cache = <&L2_3>;
			fsl,portid-mapping = <0x10000000>;
			L2_3: l2-cache {
				next-level-cache = <&cpc>;
			};
		};
		cpu4: PowerPC,e500mc@4 {
			device_type = "cpu";
			reg = <4>;
			clocks = <&mux4>;
			next-level-cache = <&L2_4>;
			fsl,portid-mapping = <0x08000000>;
			L2_4: l2-cache {
				next-level-cache = <&cpc>;
			};
		};
		cpu5: PowerPC,e500mc@5 {
			device_type = "cpu";
			reg = <5>;
			clocks = <&mux5>;
			next-level-cache = <&L2_5>;
			fsl,portid-mapping = <0x04000000>;
			L2_5: l2-cache {
				next-level-cache = <&cpc>;
			};
		};
		cpu6: PowerPC,e500mc@6 {
			device_type = "cpu";
			reg = <6>;
			clocks = <&mux6>;
			next-level-cache = <&L2_6>;
			fsl,portid-mapping = <0x02000000>;
			L2_6: l2-cache {
				next-level-cache = <&cpc>;
			};
		};
		cpu7: PowerPC,e500mc@7 {
			device_type = "cpu";
			reg = <7>;
			clocks = <&mux7>;
			next-level-cache = <&L2_7>;
			fsl,portid-mapping = <0x01000000>;
			L2_7: l2-cache {
				next-level-cache = <&cpc>;
			};
		};
	};
};