|  | /* | 
|  | *  USB HID support for Linux | 
|  | * | 
|  | *  Copyright (c) 1999 Andreas Gal | 
|  | *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> | 
|  | *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc | 
|  | *  Copyright (c) 2007-2008 Oliver Neukum | 
|  | *  Copyright (c) 2006-2010 Jiri Kosina | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms of the GNU General Public License as published by the Free | 
|  | * Software Foundation; either version 2 of the License, or (at your option) | 
|  | * any later version. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <asm/unaligned.h> | 
|  | #include <asm/byteorder.h> | 
|  | #include <linux/input.h> | 
|  | #include <linux/wait.h> | 
|  | #include <linux/workqueue.h> | 
|  | #include <linux/string.h> | 
|  |  | 
|  | #include <linux/usb.h> | 
|  |  | 
|  | #include <linux/hid.h> | 
|  | #include <linux/hiddev.h> | 
|  | #include <linux/hid-debug.h> | 
|  | #include <linux/hidraw.h> | 
|  | #include "usbhid.h" | 
|  |  | 
|  | /* | 
|  | * Version Information | 
|  | */ | 
|  |  | 
|  | #define DRIVER_DESC "USB HID core driver" | 
|  | #define DRIVER_LICENSE "GPL" | 
|  |  | 
|  | /* | 
|  | * Module parameters. | 
|  | */ | 
|  |  | 
|  | static unsigned int hid_mousepoll_interval; | 
|  | module_param_named(mousepoll, hid_mousepoll_interval, uint, 0644); | 
|  | MODULE_PARM_DESC(mousepoll, "Polling interval of mice"); | 
|  |  | 
|  | static unsigned int ignoreled; | 
|  | module_param_named(ignoreled, ignoreled, uint, 0644); | 
|  | MODULE_PARM_DESC(ignoreled, "Autosuspend with active leds"); | 
|  |  | 
|  | /* Quirks specified at module load time */ | 
|  | static char *quirks_param[MAX_USBHID_BOOT_QUIRKS]; | 
|  | module_param_array_named(quirks, quirks_param, charp, NULL, 0444); | 
|  | MODULE_PARM_DESC(quirks, "Add/modify USB HID quirks by specifying " | 
|  | " quirks=vendorID:productID:quirks" | 
|  | " where vendorID, productID, and quirks are all in" | 
|  | " 0x-prefixed hex"); | 
|  | /* | 
|  | * Input submission and I/O error handler. | 
|  | */ | 
|  | static DEFINE_MUTEX(hid_open_mut); | 
|  |  | 
|  | static void hid_io_error(struct hid_device *hid); | 
|  | static int hid_submit_out(struct hid_device *hid); | 
|  | static int hid_submit_ctrl(struct hid_device *hid); | 
|  | static void hid_cancel_delayed_stuff(struct usbhid_device *usbhid); | 
|  |  | 
|  | /* Start up the input URB */ | 
|  | static int hid_start_in(struct hid_device *hid) | 
|  | { | 
|  | unsigned long flags; | 
|  | int rc = 0; | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  |  | 
|  | spin_lock_irqsave(&usbhid->lock, flags); | 
|  | if ((hid->open > 0 || hid->quirks & HID_QUIRK_ALWAYS_POLL) && | 
|  | !test_bit(HID_DISCONNECTED, &usbhid->iofl) && | 
|  | !test_bit(HID_SUSPENDED, &usbhid->iofl) && | 
|  | !test_and_set_bit(HID_IN_RUNNING, &usbhid->iofl)) { | 
|  | rc = usb_submit_urb(usbhid->urbin, GFP_ATOMIC); | 
|  | if (rc != 0) { | 
|  | clear_bit(HID_IN_RUNNING, &usbhid->iofl); | 
|  | if (rc == -ENOSPC) | 
|  | set_bit(HID_NO_BANDWIDTH, &usbhid->iofl); | 
|  | } else { | 
|  | clear_bit(HID_NO_BANDWIDTH, &usbhid->iofl); | 
|  | } | 
|  | } | 
|  | spin_unlock_irqrestore(&usbhid->lock, flags); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* I/O retry timer routine */ | 
|  | static void hid_retry_timeout(unsigned long _hid) | 
|  | { | 
|  | struct hid_device *hid = (struct hid_device *) _hid; | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  |  | 
|  | dev_dbg(&usbhid->intf->dev, "retrying intr urb\n"); | 
|  | if (hid_start_in(hid)) | 
|  | hid_io_error(hid); | 
|  | } | 
|  |  | 
|  | /* Workqueue routine to reset the device or clear a halt */ | 
|  | static void hid_reset(struct work_struct *work) | 
|  | { | 
|  | struct usbhid_device *usbhid = | 
|  | container_of(work, struct usbhid_device, reset_work); | 
|  | struct hid_device *hid = usbhid->hid; | 
|  | int rc; | 
|  |  | 
|  | if (test_bit(HID_CLEAR_HALT, &usbhid->iofl)) { | 
|  | dev_dbg(&usbhid->intf->dev, "clear halt\n"); | 
|  | rc = usb_clear_halt(hid_to_usb_dev(hid), usbhid->urbin->pipe); | 
|  | clear_bit(HID_CLEAR_HALT, &usbhid->iofl); | 
|  | if (rc == 0) { | 
|  | hid_start_in(hid); | 
|  | } else { | 
|  | dev_dbg(&usbhid->intf->dev, | 
|  | "clear-halt failed: %d\n", rc); | 
|  | set_bit(HID_RESET_PENDING, &usbhid->iofl); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (test_bit(HID_RESET_PENDING, &usbhid->iofl)) { | 
|  | dev_dbg(&usbhid->intf->dev, "resetting device\n"); | 
|  | usb_queue_reset_device(usbhid->intf); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Main I/O error handler */ | 
|  | static void hid_io_error(struct hid_device *hid) | 
|  | { | 
|  | unsigned long flags; | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  |  | 
|  | spin_lock_irqsave(&usbhid->lock, flags); | 
|  |  | 
|  | /* Stop when disconnected */ | 
|  | if (test_bit(HID_DISCONNECTED, &usbhid->iofl)) | 
|  | goto done; | 
|  |  | 
|  | /* If it has been a while since the last error, we'll assume | 
|  | * this a brand new error and reset the retry timeout. */ | 
|  | if (time_after(jiffies, usbhid->stop_retry + HZ/2)) | 
|  | usbhid->retry_delay = 0; | 
|  |  | 
|  | /* When an error occurs, retry at increasing intervals */ | 
|  | if (usbhid->retry_delay == 0) { | 
|  | usbhid->retry_delay = 13;	/* Then 26, 52, 104, 104, ... */ | 
|  | usbhid->stop_retry = jiffies + msecs_to_jiffies(1000); | 
|  | } else if (usbhid->retry_delay < 100) | 
|  | usbhid->retry_delay *= 2; | 
|  |  | 
|  | if (time_after(jiffies, usbhid->stop_retry)) { | 
|  |  | 
|  | /* Retries failed, so do a port reset unless we lack bandwidth*/ | 
|  | if (!test_bit(HID_NO_BANDWIDTH, &usbhid->iofl) | 
|  | && !test_and_set_bit(HID_RESET_PENDING, &usbhid->iofl)) { | 
|  |  | 
|  | schedule_work(&usbhid->reset_work); | 
|  | goto done; | 
|  | } | 
|  | } | 
|  |  | 
|  | mod_timer(&usbhid->io_retry, | 
|  | jiffies + msecs_to_jiffies(usbhid->retry_delay)); | 
|  | done: | 
|  | spin_unlock_irqrestore(&usbhid->lock, flags); | 
|  | } | 
|  |  | 
|  | static void usbhid_mark_busy(struct usbhid_device *usbhid) | 
|  | { | 
|  | struct usb_interface *intf = usbhid->intf; | 
|  |  | 
|  | usb_mark_last_busy(interface_to_usbdev(intf)); | 
|  | } | 
|  |  | 
|  | static int usbhid_restart_out_queue(struct usbhid_device *usbhid) | 
|  | { | 
|  | struct hid_device *hid = usb_get_intfdata(usbhid->intf); | 
|  | int kicked; | 
|  | int r; | 
|  |  | 
|  | if (!hid || test_bit(HID_RESET_PENDING, &usbhid->iofl) || | 
|  | test_bit(HID_SUSPENDED, &usbhid->iofl)) | 
|  | return 0; | 
|  |  | 
|  | if ((kicked = (usbhid->outhead != usbhid->outtail))) { | 
|  | hid_dbg(hid, "Kicking head %d tail %d", usbhid->outhead, usbhid->outtail); | 
|  |  | 
|  | /* Try to wake up from autosuspend... */ | 
|  | r = usb_autopm_get_interface_async(usbhid->intf); | 
|  | if (r < 0) | 
|  | return r; | 
|  |  | 
|  | /* | 
|  | * If still suspended, don't submit.  Submission will | 
|  | * occur if/when resume drains the queue. | 
|  | */ | 
|  | if (test_bit(HID_SUSPENDED, &usbhid->iofl)) { | 
|  | usb_autopm_put_interface_no_suspend(usbhid->intf); | 
|  | return r; | 
|  | } | 
|  |  | 
|  | /* Asynchronously flush queue. */ | 
|  | set_bit(HID_OUT_RUNNING, &usbhid->iofl); | 
|  | if (hid_submit_out(hid)) { | 
|  | clear_bit(HID_OUT_RUNNING, &usbhid->iofl); | 
|  | usb_autopm_put_interface_async(usbhid->intf); | 
|  | } | 
|  | wake_up(&usbhid->wait); | 
|  | } | 
|  | return kicked; | 
|  | } | 
|  |  | 
|  | static int usbhid_restart_ctrl_queue(struct usbhid_device *usbhid) | 
|  | { | 
|  | struct hid_device *hid = usb_get_intfdata(usbhid->intf); | 
|  | int kicked; | 
|  | int r; | 
|  |  | 
|  | WARN_ON(hid == NULL); | 
|  | if (!hid || test_bit(HID_RESET_PENDING, &usbhid->iofl) || | 
|  | test_bit(HID_SUSPENDED, &usbhid->iofl)) | 
|  | return 0; | 
|  |  | 
|  | if ((kicked = (usbhid->ctrlhead != usbhid->ctrltail))) { | 
|  | hid_dbg(hid, "Kicking head %d tail %d", usbhid->ctrlhead, usbhid->ctrltail); | 
|  |  | 
|  | /* Try to wake up from autosuspend... */ | 
|  | r = usb_autopm_get_interface_async(usbhid->intf); | 
|  | if (r < 0) | 
|  | return r; | 
|  |  | 
|  | /* | 
|  | * If still suspended, don't submit.  Submission will | 
|  | * occur if/when resume drains the queue. | 
|  | */ | 
|  | if (test_bit(HID_SUSPENDED, &usbhid->iofl)) { | 
|  | usb_autopm_put_interface_no_suspend(usbhid->intf); | 
|  | return r; | 
|  | } | 
|  |  | 
|  | /* Asynchronously flush queue. */ | 
|  | set_bit(HID_CTRL_RUNNING, &usbhid->iofl); | 
|  | if (hid_submit_ctrl(hid)) { | 
|  | clear_bit(HID_CTRL_RUNNING, &usbhid->iofl); | 
|  | usb_autopm_put_interface_async(usbhid->intf); | 
|  | } | 
|  | wake_up(&usbhid->wait); | 
|  | } | 
|  | return kicked; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Input interrupt completion handler. | 
|  | */ | 
|  |  | 
|  | static void hid_irq_in(struct urb *urb) | 
|  | { | 
|  | struct hid_device	*hid = urb->context; | 
|  | struct usbhid_device 	*usbhid = hid->driver_data; | 
|  | int			status; | 
|  |  | 
|  | switch (urb->status) { | 
|  | case 0:			/* success */ | 
|  | usbhid_mark_busy(usbhid); | 
|  | usbhid->retry_delay = 0; | 
|  | if ((hid->quirks & HID_QUIRK_ALWAYS_POLL) && !hid->open) | 
|  | break; | 
|  | if (!test_bit(HID_RESUME_RUNNING, &usbhid->iofl)) { | 
|  | hid_input_report(urb->context, HID_INPUT_REPORT, | 
|  | urb->transfer_buffer, | 
|  | urb->actual_length, 1); | 
|  | /* | 
|  | * autosuspend refused while keys are pressed | 
|  | * because most keyboards don't wake up when | 
|  | * a key is released | 
|  | */ | 
|  | if (hid_check_keys_pressed(hid)) | 
|  | set_bit(HID_KEYS_PRESSED, &usbhid->iofl); | 
|  | else | 
|  | clear_bit(HID_KEYS_PRESSED, &usbhid->iofl); | 
|  | } | 
|  | break; | 
|  | case -EPIPE:		/* stall */ | 
|  | usbhid_mark_busy(usbhid); | 
|  | clear_bit(HID_IN_RUNNING, &usbhid->iofl); | 
|  | set_bit(HID_CLEAR_HALT, &usbhid->iofl); | 
|  | schedule_work(&usbhid->reset_work); | 
|  | return; | 
|  | case -ECONNRESET:	/* unlink */ | 
|  | case -ENOENT: | 
|  | case -ESHUTDOWN:	/* unplug */ | 
|  | clear_bit(HID_IN_RUNNING, &usbhid->iofl); | 
|  | return; | 
|  | case -EILSEQ:		/* protocol error or unplug */ | 
|  | case -EPROTO:		/* protocol error or unplug */ | 
|  | case -ETIME:		/* protocol error or unplug */ | 
|  | case -ETIMEDOUT:	/* Should never happen, but... */ | 
|  | usbhid_mark_busy(usbhid); | 
|  | clear_bit(HID_IN_RUNNING, &usbhid->iofl); | 
|  | hid_io_error(hid); | 
|  | return; | 
|  | default:		/* error */ | 
|  | hid_warn(urb->dev, "input irq status %d received\n", | 
|  | urb->status); | 
|  | } | 
|  |  | 
|  | status = usb_submit_urb(urb, GFP_ATOMIC); | 
|  | if (status) { | 
|  | clear_bit(HID_IN_RUNNING, &usbhid->iofl); | 
|  | if (status != -EPERM) { | 
|  | hid_err(hid, "can't resubmit intr, %s-%s/input%d, status %d\n", | 
|  | hid_to_usb_dev(hid)->bus->bus_name, | 
|  | hid_to_usb_dev(hid)->devpath, | 
|  | usbhid->ifnum, status); | 
|  | hid_io_error(hid); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static int hid_submit_out(struct hid_device *hid) | 
|  | { | 
|  | struct hid_report *report; | 
|  | char *raw_report; | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  | int r; | 
|  |  | 
|  | report = usbhid->out[usbhid->outtail].report; | 
|  | raw_report = usbhid->out[usbhid->outtail].raw_report; | 
|  |  | 
|  | usbhid->urbout->transfer_buffer_length = hid_report_len(report); | 
|  | usbhid->urbout->dev = hid_to_usb_dev(hid); | 
|  | if (raw_report) { | 
|  | memcpy(usbhid->outbuf, raw_report, | 
|  | usbhid->urbout->transfer_buffer_length); | 
|  | kfree(raw_report); | 
|  | usbhid->out[usbhid->outtail].raw_report = NULL; | 
|  | } | 
|  |  | 
|  | dbg_hid("submitting out urb\n"); | 
|  |  | 
|  | r = usb_submit_urb(usbhid->urbout, GFP_ATOMIC); | 
|  | if (r < 0) { | 
|  | hid_err(hid, "usb_submit_urb(out) failed: %d\n", r); | 
|  | return r; | 
|  | } | 
|  | usbhid->last_out = jiffies; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int hid_submit_ctrl(struct hid_device *hid) | 
|  | { | 
|  | struct hid_report *report; | 
|  | unsigned char dir; | 
|  | char *raw_report; | 
|  | int len, r; | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  |  | 
|  | report = usbhid->ctrl[usbhid->ctrltail].report; | 
|  | raw_report = usbhid->ctrl[usbhid->ctrltail].raw_report; | 
|  | dir = usbhid->ctrl[usbhid->ctrltail].dir; | 
|  |  | 
|  | len = ((report->size - 1) >> 3) + 1 + (report->id > 0); | 
|  | if (dir == USB_DIR_OUT) { | 
|  | usbhid->urbctrl->pipe = usb_sndctrlpipe(hid_to_usb_dev(hid), 0); | 
|  | usbhid->urbctrl->transfer_buffer_length = len; | 
|  | if (raw_report) { | 
|  | memcpy(usbhid->ctrlbuf, raw_report, len); | 
|  | kfree(raw_report); | 
|  | usbhid->ctrl[usbhid->ctrltail].raw_report = NULL; | 
|  | } | 
|  | } else { | 
|  | int maxpacket, padlen; | 
|  |  | 
|  | usbhid->urbctrl->pipe = usb_rcvctrlpipe(hid_to_usb_dev(hid), 0); | 
|  | maxpacket = usb_maxpacket(hid_to_usb_dev(hid), | 
|  | usbhid->urbctrl->pipe, 0); | 
|  | if (maxpacket > 0) { | 
|  | padlen = DIV_ROUND_UP(len, maxpacket); | 
|  | padlen *= maxpacket; | 
|  | if (padlen > usbhid->bufsize) | 
|  | padlen = usbhid->bufsize; | 
|  | } else | 
|  | padlen = 0; | 
|  | usbhid->urbctrl->transfer_buffer_length = padlen; | 
|  | } | 
|  | usbhid->urbctrl->dev = hid_to_usb_dev(hid); | 
|  |  | 
|  | usbhid->cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE | dir; | 
|  | usbhid->cr->bRequest = (dir == USB_DIR_OUT) ? HID_REQ_SET_REPORT : | 
|  | HID_REQ_GET_REPORT; | 
|  | usbhid->cr->wValue = cpu_to_le16(((report->type + 1) << 8) | | 
|  | report->id); | 
|  | usbhid->cr->wIndex = cpu_to_le16(usbhid->ifnum); | 
|  | usbhid->cr->wLength = cpu_to_le16(len); | 
|  |  | 
|  | dbg_hid("submitting ctrl urb: %s wValue=0x%04x wIndex=0x%04x wLength=%u\n", | 
|  | usbhid->cr->bRequest == HID_REQ_SET_REPORT ? "Set_Report" : | 
|  | "Get_Report", | 
|  | usbhid->cr->wValue, usbhid->cr->wIndex, usbhid->cr->wLength); | 
|  |  | 
|  | r = usb_submit_urb(usbhid->urbctrl, GFP_ATOMIC); | 
|  | if (r < 0) { | 
|  | hid_err(hid, "usb_submit_urb(ctrl) failed: %d\n", r); | 
|  | return r; | 
|  | } | 
|  | usbhid->last_ctrl = jiffies; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Output interrupt completion handler. | 
|  | */ | 
|  |  | 
|  | static void hid_irq_out(struct urb *urb) | 
|  | { | 
|  | struct hid_device *hid = urb->context; | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  | unsigned long flags; | 
|  | int unplug = 0; | 
|  |  | 
|  | switch (urb->status) { | 
|  | case 0:			/* success */ | 
|  | break; | 
|  | case -ESHUTDOWN:	/* unplug */ | 
|  | unplug = 1; | 
|  | case -EILSEQ:		/* protocol error or unplug */ | 
|  | case -EPROTO:		/* protocol error or unplug */ | 
|  | case -ECONNRESET:	/* unlink */ | 
|  | case -ENOENT: | 
|  | break; | 
|  | default:		/* error */ | 
|  | hid_warn(urb->dev, "output irq status %d received\n", | 
|  | urb->status); | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&usbhid->lock, flags); | 
|  |  | 
|  | if (unplug) { | 
|  | usbhid->outtail = usbhid->outhead; | 
|  | } else { | 
|  | usbhid->outtail = (usbhid->outtail + 1) & (HID_OUTPUT_FIFO_SIZE - 1); | 
|  |  | 
|  | if (usbhid->outhead != usbhid->outtail && | 
|  | hid_submit_out(hid) == 0) { | 
|  | /* Successfully submitted next urb in queue */ | 
|  | spin_unlock_irqrestore(&usbhid->lock, flags); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | clear_bit(HID_OUT_RUNNING, &usbhid->iofl); | 
|  | spin_unlock_irqrestore(&usbhid->lock, flags); | 
|  | usb_autopm_put_interface_async(usbhid->intf); | 
|  | wake_up(&usbhid->wait); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Control pipe completion handler. | 
|  | */ | 
|  |  | 
|  | static void hid_ctrl(struct urb *urb) | 
|  | { | 
|  | struct hid_device *hid = urb->context; | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  | int unplug = 0, status = urb->status; | 
|  |  | 
|  | spin_lock(&usbhid->lock); | 
|  |  | 
|  | switch (status) { | 
|  | case 0:			/* success */ | 
|  | if (usbhid->ctrl[usbhid->ctrltail].dir == USB_DIR_IN) | 
|  | hid_input_report(urb->context, | 
|  | usbhid->ctrl[usbhid->ctrltail].report->type, | 
|  | urb->transfer_buffer, urb->actual_length, 0); | 
|  | break; | 
|  | case -ESHUTDOWN:	/* unplug */ | 
|  | unplug = 1; | 
|  | case -EILSEQ:		/* protocol error or unplug */ | 
|  | case -EPROTO:		/* protocol error or unplug */ | 
|  | case -ECONNRESET:	/* unlink */ | 
|  | case -ENOENT: | 
|  | case -EPIPE:		/* report not available */ | 
|  | break; | 
|  | default:		/* error */ | 
|  | hid_warn(urb->dev, "ctrl urb status %d received\n", status); | 
|  | } | 
|  |  | 
|  | if (unplug) { | 
|  | usbhid->ctrltail = usbhid->ctrlhead; | 
|  | } else { | 
|  | usbhid->ctrltail = (usbhid->ctrltail + 1) & (HID_CONTROL_FIFO_SIZE - 1); | 
|  |  | 
|  | if (usbhid->ctrlhead != usbhid->ctrltail && | 
|  | hid_submit_ctrl(hid) == 0) { | 
|  | /* Successfully submitted next urb in queue */ | 
|  | spin_unlock(&usbhid->lock); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | clear_bit(HID_CTRL_RUNNING, &usbhid->iofl); | 
|  | spin_unlock(&usbhid->lock); | 
|  | usb_autopm_put_interface_async(usbhid->intf); | 
|  | wake_up(&usbhid->wait); | 
|  | } | 
|  |  | 
|  | static void __usbhid_submit_report(struct hid_device *hid, struct hid_report *report, | 
|  | unsigned char dir) | 
|  | { | 
|  | int head; | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  |  | 
|  | if (((hid->quirks & HID_QUIRK_NOGET) && dir == USB_DIR_IN) || | 
|  | test_bit(HID_DISCONNECTED, &usbhid->iofl)) | 
|  | return; | 
|  |  | 
|  | if (usbhid->urbout && dir == USB_DIR_OUT && report->type == HID_OUTPUT_REPORT) { | 
|  | if ((head = (usbhid->outhead + 1) & (HID_OUTPUT_FIFO_SIZE - 1)) == usbhid->outtail) { | 
|  | hid_warn(hid, "output queue full\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | usbhid->out[usbhid->outhead].raw_report = hid_alloc_report_buf(report, GFP_ATOMIC); | 
|  | if (!usbhid->out[usbhid->outhead].raw_report) { | 
|  | hid_warn(hid, "output queueing failed\n"); | 
|  | return; | 
|  | } | 
|  | hid_output_report(report, usbhid->out[usbhid->outhead].raw_report); | 
|  | usbhid->out[usbhid->outhead].report = report; | 
|  | usbhid->outhead = head; | 
|  |  | 
|  | /* If the queue isn't running, restart it */ | 
|  | if (!test_bit(HID_OUT_RUNNING, &usbhid->iofl)) { | 
|  | usbhid_restart_out_queue(usbhid); | 
|  |  | 
|  | /* Otherwise see if an earlier request has timed out */ | 
|  | } else if (time_after(jiffies, usbhid->last_out + HZ * 5)) { | 
|  |  | 
|  | /* Prevent autosuspend following the unlink */ | 
|  | usb_autopm_get_interface_no_resume(usbhid->intf); | 
|  |  | 
|  | /* | 
|  | * Prevent resubmission in case the URB completes | 
|  | * before we can unlink it.  We don't want to cancel | 
|  | * the wrong transfer! | 
|  | */ | 
|  | usb_block_urb(usbhid->urbout); | 
|  |  | 
|  | /* Drop lock to avoid deadlock if the callback runs */ | 
|  | spin_unlock(&usbhid->lock); | 
|  |  | 
|  | usb_unlink_urb(usbhid->urbout); | 
|  | spin_lock(&usbhid->lock); | 
|  | usb_unblock_urb(usbhid->urbout); | 
|  |  | 
|  | /* Unlink might have stopped the queue */ | 
|  | if (!test_bit(HID_OUT_RUNNING, &usbhid->iofl)) | 
|  | usbhid_restart_out_queue(usbhid); | 
|  |  | 
|  | /* Now we can allow autosuspend again */ | 
|  | usb_autopm_put_interface_async(usbhid->intf); | 
|  | } | 
|  | return; | 
|  | } | 
|  |  | 
|  | if ((head = (usbhid->ctrlhead + 1) & (HID_CONTROL_FIFO_SIZE - 1)) == usbhid->ctrltail) { | 
|  | hid_warn(hid, "control queue full\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (dir == USB_DIR_OUT) { | 
|  | usbhid->ctrl[usbhid->ctrlhead].raw_report = hid_alloc_report_buf(report, GFP_ATOMIC); | 
|  | if (!usbhid->ctrl[usbhid->ctrlhead].raw_report) { | 
|  | hid_warn(hid, "control queueing failed\n"); | 
|  | return; | 
|  | } | 
|  | hid_output_report(report, usbhid->ctrl[usbhid->ctrlhead].raw_report); | 
|  | } | 
|  | usbhid->ctrl[usbhid->ctrlhead].report = report; | 
|  | usbhid->ctrl[usbhid->ctrlhead].dir = dir; | 
|  | usbhid->ctrlhead = head; | 
|  |  | 
|  | /* If the queue isn't running, restart it */ | 
|  | if (!test_bit(HID_CTRL_RUNNING, &usbhid->iofl)) { | 
|  | usbhid_restart_ctrl_queue(usbhid); | 
|  |  | 
|  | /* Otherwise see if an earlier request has timed out */ | 
|  | } else if (time_after(jiffies, usbhid->last_ctrl + HZ * 5)) { | 
|  |  | 
|  | /* Prevent autosuspend following the unlink */ | 
|  | usb_autopm_get_interface_no_resume(usbhid->intf); | 
|  |  | 
|  | /* | 
|  | * Prevent resubmission in case the URB completes | 
|  | * before we can unlink it.  We don't want to cancel | 
|  | * the wrong transfer! | 
|  | */ | 
|  | usb_block_urb(usbhid->urbctrl); | 
|  |  | 
|  | /* Drop lock to avoid deadlock if the callback runs */ | 
|  | spin_unlock(&usbhid->lock); | 
|  |  | 
|  | usb_unlink_urb(usbhid->urbctrl); | 
|  | spin_lock(&usbhid->lock); | 
|  | usb_unblock_urb(usbhid->urbctrl); | 
|  |  | 
|  | /* Unlink might have stopped the queue */ | 
|  | if (!test_bit(HID_CTRL_RUNNING, &usbhid->iofl)) | 
|  | usbhid_restart_ctrl_queue(usbhid); | 
|  |  | 
|  | /* Now we can allow autosuspend again */ | 
|  | usb_autopm_put_interface_async(usbhid->intf); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir) | 
|  | { | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&usbhid->lock, flags); | 
|  | __usbhid_submit_report(hid, report, dir); | 
|  | spin_unlock_irqrestore(&usbhid->lock, flags); | 
|  | } | 
|  |  | 
|  | static int usbhid_wait_io(struct hid_device *hid) | 
|  | { | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  |  | 
|  | if (!wait_event_timeout(usbhid->wait, | 
|  | (!test_bit(HID_CTRL_RUNNING, &usbhid->iofl) && | 
|  | !test_bit(HID_OUT_RUNNING, &usbhid->iofl)), | 
|  | 10*HZ)) { | 
|  | dbg_hid("timeout waiting for ctrl or out queue to clear\n"); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int hid_set_idle(struct usb_device *dev, int ifnum, int report, int idle) | 
|  | { | 
|  | return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | 
|  | HID_REQ_SET_IDLE, USB_TYPE_CLASS | USB_RECIP_INTERFACE, (idle << 8) | report, | 
|  | ifnum, NULL, 0, USB_CTRL_SET_TIMEOUT); | 
|  | } | 
|  |  | 
|  | static int hid_get_class_descriptor(struct usb_device *dev, int ifnum, | 
|  | unsigned char type, void *buf, int size) | 
|  | { | 
|  | int result, retries = 4; | 
|  |  | 
|  | memset(buf, 0, size); | 
|  |  | 
|  | do { | 
|  | result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), | 
|  | USB_REQ_GET_DESCRIPTOR, USB_RECIP_INTERFACE | USB_DIR_IN, | 
|  | (type << 8), ifnum, buf, size, USB_CTRL_GET_TIMEOUT); | 
|  | retries--; | 
|  | } while (result < size && retries); | 
|  | return result; | 
|  | } | 
|  |  | 
|  | int usbhid_open(struct hid_device *hid) | 
|  | { | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  | int res = 0; | 
|  |  | 
|  | mutex_lock(&hid_open_mut); | 
|  | if (!hid->open++) { | 
|  | res = usb_autopm_get_interface(usbhid->intf); | 
|  | /* the device must be awake to reliably request remote wakeup */ | 
|  | if (res < 0) { | 
|  | hid->open--; | 
|  | res = -EIO; | 
|  | goto done; | 
|  | } | 
|  | usbhid->intf->needs_remote_wakeup = 1; | 
|  | set_bit(HID_RESUME_RUNNING, &usbhid->iofl); | 
|  | res = hid_start_in(hid); | 
|  | if (res) { | 
|  | if (res != -ENOSPC) { | 
|  | hid_io_error(hid); | 
|  | res = 0; | 
|  | } else { | 
|  | /* no use opening if resources are insufficient */ | 
|  | hid->open--; | 
|  | res = -EBUSY; | 
|  | usbhid->intf->needs_remote_wakeup = 0; | 
|  | } | 
|  | } | 
|  | usb_autopm_put_interface(usbhid->intf); | 
|  |  | 
|  | /* | 
|  | * In case events are generated while nobody was listening, | 
|  | * some are released when the device is re-opened. | 
|  | * Wait 50 msec for the queue to empty before allowing events | 
|  | * to go through hid. | 
|  | */ | 
|  | msleep(50); | 
|  | clear_bit(HID_RESUME_RUNNING, &usbhid->iofl); | 
|  | } | 
|  | done: | 
|  | mutex_unlock(&hid_open_mut); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | void usbhid_close(struct hid_device *hid) | 
|  | { | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  |  | 
|  | mutex_lock(&hid_open_mut); | 
|  |  | 
|  | /* protecting hid->open to make sure we don't restart | 
|  | * data acquistion due to a resumption we no longer | 
|  | * care about | 
|  | */ | 
|  | spin_lock_irq(&usbhid->lock); | 
|  | if (!--hid->open) { | 
|  | spin_unlock_irq(&usbhid->lock); | 
|  | hid_cancel_delayed_stuff(usbhid); | 
|  | if (!(hid->quirks & HID_QUIRK_ALWAYS_POLL)) { | 
|  | usb_kill_urb(usbhid->urbin); | 
|  | usbhid->intf->needs_remote_wakeup = 0; | 
|  | } | 
|  | } else { | 
|  | spin_unlock_irq(&usbhid->lock); | 
|  | } | 
|  | mutex_unlock(&hid_open_mut); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Initialize all reports | 
|  | */ | 
|  |  | 
|  | void usbhid_init_reports(struct hid_device *hid) | 
|  | { | 
|  | struct hid_report *report; | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  | struct hid_report_enum *report_enum; | 
|  | int err, ret; | 
|  |  | 
|  | if (!(hid->quirks & HID_QUIRK_NO_INIT_INPUT_REPORTS)) { | 
|  | report_enum = &hid->report_enum[HID_INPUT_REPORT]; | 
|  | list_for_each_entry(report, &report_enum->report_list, list) | 
|  | usbhid_submit_report(hid, report, USB_DIR_IN); | 
|  | } | 
|  |  | 
|  | report_enum = &hid->report_enum[HID_FEATURE_REPORT]; | 
|  | list_for_each_entry(report, &report_enum->report_list, list) | 
|  | usbhid_submit_report(hid, report, USB_DIR_IN); | 
|  |  | 
|  | err = 0; | 
|  | ret = usbhid_wait_io(hid); | 
|  | while (ret) { | 
|  | err |= ret; | 
|  | if (test_bit(HID_CTRL_RUNNING, &usbhid->iofl)) | 
|  | usb_kill_urb(usbhid->urbctrl); | 
|  | if (test_bit(HID_OUT_RUNNING, &usbhid->iofl)) | 
|  | usb_kill_urb(usbhid->urbout); | 
|  | ret = usbhid_wait_io(hid); | 
|  | } | 
|  |  | 
|  | if (err) | 
|  | hid_warn(hid, "timeout initializing reports\n"); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Reset LEDs which BIOS might have left on. For now, just NumLock (0x01). | 
|  | */ | 
|  | static int hid_find_field_early(struct hid_device *hid, unsigned int page, | 
|  | unsigned int hid_code, struct hid_field **pfield) | 
|  | { | 
|  | struct hid_report *report; | 
|  | struct hid_field *field; | 
|  | struct hid_usage *usage; | 
|  | int i, j; | 
|  |  | 
|  | list_for_each_entry(report, &hid->report_enum[HID_OUTPUT_REPORT].report_list, list) { | 
|  | for (i = 0; i < report->maxfield; i++) { | 
|  | field = report->field[i]; | 
|  | for (j = 0; j < field->maxusage; j++) { | 
|  | usage = &field->usage[j]; | 
|  | if ((usage->hid & HID_USAGE_PAGE) == page && | 
|  | (usage->hid & 0xFFFF) == hid_code) { | 
|  | *pfield = field; | 
|  | return j; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static void usbhid_set_leds(struct hid_device *hid) | 
|  | { | 
|  | struct hid_field *field; | 
|  | int offset; | 
|  |  | 
|  | if ((offset = hid_find_field_early(hid, HID_UP_LED, 0x01, &field)) != -1) { | 
|  | hid_set_field(field, offset, 0); | 
|  | usbhid_submit_report(hid, field->report, USB_DIR_OUT); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Traverse the supplied list of reports and find the longest | 
|  | */ | 
|  | static void hid_find_max_report(struct hid_device *hid, unsigned int type, | 
|  | unsigned int *max) | 
|  | { | 
|  | struct hid_report *report; | 
|  | unsigned int size; | 
|  |  | 
|  | list_for_each_entry(report, &hid->report_enum[type].report_list, list) { | 
|  | size = ((report->size - 1) >> 3) + 1 + hid->report_enum[type].numbered; | 
|  | if (*max < size) | 
|  | *max = size; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int hid_alloc_buffers(struct usb_device *dev, struct hid_device *hid) | 
|  | { | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  |  | 
|  | usbhid->inbuf = usb_alloc_coherent(dev, usbhid->bufsize, GFP_KERNEL, | 
|  | &usbhid->inbuf_dma); | 
|  | usbhid->outbuf = usb_alloc_coherent(dev, usbhid->bufsize, GFP_KERNEL, | 
|  | &usbhid->outbuf_dma); | 
|  | usbhid->cr = kmalloc(sizeof(*usbhid->cr), GFP_KERNEL); | 
|  | usbhid->ctrlbuf = usb_alloc_coherent(dev, usbhid->bufsize, GFP_KERNEL, | 
|  | &usbhid->ctrlbuf_dma); | 
|  | if (!usbhid->inbuf || !usbhid->outbuf || !usbhid->cr || | 
|  | !usbhid->ctrlbuf) | 
|  | return -1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int usbhid_get_raw_report(struct hid_device *hid, | 
|  | unsigned char report_number, __u8 *buf, size_t count, | 
|  | unsigned char report_type) | 
|  | { | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  | struct usb_device *dev = hid_to_usb_dev(hid); | 
|  | struct usb_interface *intf = usbhid->intf; | 
|  | struct usb_host_interface *interface = intf->cur_altsetting; | 
|  | int skipped_report_id = 0; | 
|  | int ret; | 
|  |  | 
|  | /* Byte 0 is the report number. Report data starts at byte 1.*/ | 
|  | buf[0] = report_number; | 
|  | if (report_number == 0x0) { | 
|  | /* Offset the return buffer by 1, so that the report ID | 
|  | will remain in byte 0. */ | 
|  | buf++; | 
|  | count--; | 
|  | skipped_report_id = 1; | 
|  | } | 
|  | ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), | 
|  | HID_REQ_GET_REPORT, | 
|  | USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, | 
|  | ((report_type + 1) << 8) | report_number, | 
|  | interface->desc.bInterfaceNumber, buf, count, | 
|  | USB_CTRL_SET_TIMEOUT); | 
|  |  | 
|  | /* count also the report id */ | 
|  | if (ret > 0 && skipped_report_id) | 
|  | ret++; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int usbhid_set_raw_report(struct hid_device *hid, unsigned int reportnum, | 
|  | __u8 *buf, size_t count, unsigned char rtype) | 
|  | { | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  | struct usb_device *dev = hid_to_usb_dev(hid); | 
|  | struct usb_interface *intf = usbhid->intf; | 
|  | struct usb_host_interface *interface = intf->cur_altsetting; | 
|  | int ret, skipped_report_id = 0; | 
|  |  | 
|  | /* Byte 0 is the report number. Report data starts at byte 1.*/ | 
|  | if ((rtype == HID_OUTPUT_REPORT) && | 
|  | (hid->quirks & HID_QUIRK_SKIP_OUTPUT_REPORT_ID)) | 
|  | buf[0] = 0; | 
|  | else | 
|  | buf[0] = reportnum; | 
|  |  | 
|  | if (buf[0] == 0x0) { | 
|  | /* Don't send the Report ID */ | 
|  | buf++; | 
|  | count--; | 
|  | skipped_report_id = 1; | 
|  | } | 
|  |  | 
|  | ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | 
|  | HID_REQ_SET_REPORT, | 
|  | USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, | 
|  | ((rtype + 1) << 8) | reportnum, | 
|  | interface->desc.bInterfaceNumber, buf, count, | 
|  | USB_CTRL_SET_TIMEOUT); | 
|  | /* count also the report id, if this was a numbered report. */ | 
|  | if (ret > 0 && skipped_report_id) | 
|  | ret++; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int usbhid_output_report(struct hid_device *hid, __u8 *buf, size_t count) | 
|  | { | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  | struct usb_device *dev = hid_to_usb_dev(hid); | 
|  | int actual_length, skipped_report_id = 0, ret; | 
|  |  | 
|  | if (!usbhid->urbout) | 
|  | return -ENOSYS; | 
|  |  | 
|  | if (buf[0] == 0x0) { | 
|  | /* Don't send the Report ID */ | 
|  | buf++; | 
|  | count--; | 
|  | skipped_report_id = 1; | 
|  | } | 
|  |  | 
|  | ret = usb_interrupt_msg(dev, usbhid->urbout->pipe, | 
|  | buf, count, &actual_length, | 
|  | USB_CTRL_SET_TIMEOUT); | 
|  | /* return the number of bytes transferred */ | 
|  | if (ret == 0) { | 
|  | ret = actual_length; | 
|  | /* count also the report id */ | 
|  | if (skipped_report_id) | 
|  | ret++; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void usbhid_restart_queues(struct usbhid_device *usbhid) | 
|  | { | 
|  | if (usbhid->urbout && !test_bit(HID_OUT_RUNNING, &usbhid->iofl)) | 
|  | usbhid_restart_out_queue(usbhid); | 
|  | if (!test_bit(HID_CTRL_RUNNING, &usbhid->iofl)) | 
|  | usbhid_restart_ctrl_queue(usbhid); | 
|  | } | 
|  |  | 
|  | static void hid_free_buffers(struct usb_device *dev, struct hid_device *hid) | 
|  | { | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  |  | 
|  | usb_free_coherent(dev, usbhid->bufsize, usbhid->inbuf, usbhid->inbuf_dma); | 
|  | usb_free_coherent(dev, usbhid->bufsize, usbhid->outbuf, usbhid->outbuf_dma); | 
|  | kfree(usbhid->cr); | 
|  | usb_free_coherent(dev, usbhid->bufsize, usbhid->ctrlbuf, usbhid->ctrlbuf_dma); | 
|  | } | 
|  |  | 
|  | static int usbhid_parse(struct hid_device *hid) | 
|  | { | 
|  | struct usb_interface *intf = to_usb_interface(hid->dev.parent); | 
|  | struct usb_host_interface *interface = intf->cur_altsetting; | 
|  | struct usb_device *dev = interface_to_usbdev (intf); | 
|  | struct hid_descriptor *hdesc; | 
|  | u32 quirks = 0; | 
|  | unsigned int rsize = 0; | 
|  | char *rdesc; | 
|  | int ret, n; | 
|  |  | 
|  | quirks = usbhid_lookup_quirk(le16_to_cpu(dev->descriptor.idVendor), | 
|  | le16_to_cpu(dev->descriptor.idProduct)); | 
|  |  | 
|  | if (quirks & HID_QUIRK_IGNORE) | 
|  | return -ENODEV; | 
|  |  | 
|  | /* Many keyboards and mice don't like to be polled for reports, | 
|  | * so we will always set the HID_QUIRK_NOGET flag for them. */ | 
|  | if (interface->desc.bInterfaceSubClass == USB_INTERFACE_SUBCLASS_BOOT) { | 
|  | if (interface->desc.bInterfaceProtocol == USB_INTERFACE_PROTOCOL_KEYBOARD || | 
|  | interface->desc.bInterfaceProtocol == USB_INTERFACE_PROTOCOL_MOUSE) | 
|  | quirks |= HID_QUIRK_NOGET; | 
|  | } | 
|  |  | 
|  | if (usb_get_extra_descriptor(interface, HID_DT_HID, &hdesc) && | 
|  | (!interface->desc.bNumEndpoints || | 
|  | usb_get_extra_descriptor(&interface->endpoint[0], HID_DT_HID, &hdesc))) { | 
|  | dbg_hid("class descriptor not present\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | hid->version = le16_to_cpu(hdesc->bcdHID); | 
|  | hid->country = hdesc->bCountryCode; | 
|  |  | 
|  | for (n = 0; n < hdesc->bNumDescriptors; n++) | 
|  | if (hdesc->desc[n].bDescriptorType == HID_DT_REPORT) | 
|  | rsize = le16_to_cpu(hdesc->desc[n].wDescriptorLength); | 
|  |  | 
|  | if (!rsize || rsize > HID_MAX_DESCRIPTOR_SIZE) { | 
|  | dbg_hid("weird size of report descriptor (%u)\n", rsize); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (!(rdesc = kmalloc(rsize, GFP_KERNEL))) { | 
|  | dbg_hid("couldn't allocate rdesc memory\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | hid_set_idle(dev, interface->desc.bInterfaceNumber, 0, 0); | 
|  |  | 
|  | ret = hid_get_class_descriptor(dev, interface->desc.bInterfaceNumber, | 
|  | HID_DT_REPORT, rdesc, rsize); | 
|  | if (ret < 0) { | 
|  | dbg_hid("reading report descriptor failed\n"); | 
|  | kfree(rdesc); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | ret = hid_parse_report(hid, rdesc, rsize); | 
|  | kfree(rdesc); | 
|  | if (ret) { | 
|  | dbg_hid("parsing report descriptor failed\n"); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | hid->quirks |= quirks; | 
|  |  | 
|  | return 0; | 
|  | err: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int usbhid_start(struct hid_device *hid) | 
|  | { | 
|  | struct usb_interface *intf = to_usb_interface(hid->dev.parent); | 
|  | struct usb_host_interface *interface = intf->cur_altsetting; | 
|  | struct usb_device *dev = interface_to_usbdev(intf); | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  | unsigned int n, insize = 0; | 
|  | int ret; | 
|  |  | 
|  | clear_bit(HID_DISCONNECTED, &usbhid->iofl); | 
|  |  | 
|  | usbhid->bufsize = HID_MIN_BUFFER_SIZE; | 
|  | hid_find_max_report(hid, HID_INPUT_REPORT, &usbhid->bufsize); | 
|  | hid_find_max_report(hid, HID_OUTPUT_REPORT, &usbhid->bufsize); | 
|  | hid_find_max_report(hid, HID_FEATURE_REPORT, &usbhid->bufsize); | 
|  |  | 
|  | if (usbhid->bufsize > HID_MAX_BUFFER_SIZE) | 
|  | usbhid->bufsize = HID_MAX_BUFFER_SIZE; | 
|  |  | 
|  | hid_find_max_report(hid, HID_INPUT_REPORT, &insize); | 
|  |  | 
|  | if (insize > HID_MAX_BUFFER_SIZE) | 
|  | insize = HID_MAX_BUFFER_SIZE; | 
|  |  | 
|  | if (hid_alloc_buffers(dev, hid)) { | 
|  | ret = -ENOMEM; | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | for (n = 0; n < interface->desc.bNumEndpoints; n++) { | 
|  | struct usb_endpoint_descriptor *endpoint; | 
|  | int pipe; | 
|  | int interval; | 
|  |  | 
|  | endpoint = &interface->endpoint[n].desc; | 
|  | if (!usb_endpoint_xfer_int(endpoint)) | 
|  | continue; | 
|  |  | 
|  | interval = endpoint->bInterval; | 
|  |  | 
|  | /* Some vendors give fullspeed interval on highspeed devides */ | 
|  | if (hid->quirks & HID_QUIRK_FULLSPEED_INTERVAL && | 
|  | dev->speed == USB_SPEED_HIGH) { | 
|  | interval = fls(endpoint->bInterval*8); | 
|  | printk(KERN_INFO "%s: Fixing fullspeed to highspeed interval: %d -> %d\n", | 
|  | hid->name, endpoint->bInterval, interval); | 
|  | } | 
|  |  | 
|  | /* Change the polling interval of mice. */ | 
|  | if (hid->collection->usage == HID_GD_MOUSE && hid_mousepoll_interval > 0) | 
|  | interval = hid_mousepoll_interval; | 
|  |  | 
|  | ret = -ENOMEM; | 
|  | if (usb_endpoint_dir_in(endpoint)) { | 
|  | if (usbhid->urbin) | 
|  | continue; | 
|  | if (!(usbhid->urbin = usb_alloc_urb(0, GFP_KERNEL))) | 
|  | goto fail; | 
|  | pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress); | 
|  | usb_fill_int_urb(usbhid->urbin, dev, pipe, usbhid->inbuf, insize, | 
|  | hid_irq_in, hid, interval); | 
|  | usbhid->urbin->transfer_dma = usbhid->inbuf_dma; | 
|  | usbhid->urbin->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; | 
|  | } else { | 
|  | if (usbhid->urbout) | 
|  | continue; | 
|  | if (!(usbhid->urbout = usb_alloc_urb(0, GFP_KERNEL))) | 
|  | goto fail; | 
|  | pipe = usb_sndintpipe(dev, endpoint->bEndpointAddress); | 
|  | usb_fill_int_urb(usbhid->urbout, dev, pipe, usbhid->outbuf, 0, | 
|  | hid_irq_out, hid, interval); | 
|  | usbhid->urbout->transfer_dma = usbhid->outbuf_dma; | 
|  | usbhid->urbout->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; | 
|  | } | 
|  | } | 
|  |  | 
|  | usbhid->urbctrl = usb_alloc_urb(0, GFP_KERNEL); | 
|  | if (!usbhid->urbctrl) { | 
|  | ret = -ENOMEM; | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | usb_fill_control_urb(usbhid->urbctrl, dev, 0, (void *) usbhid->cr, | 
|  | usbhid->ctrlbuf, 1, hid_ctrl, hid); | 
|  | usbhid->urbctrl->transfer_dma = usbhid->ctrlbuf_dma; | 
|  | usbhid->urbctrl->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; | 
|  |  | 
|  | if (!(hid->quirks & HID_QUIRK_NO_INIT_REPORTS)) | 
|  | usbhid_init_reports(hid); | 
|  |  | 
|  | set_bit(HID_STARTED, &usbhid->iofl); | 
|  |  | 
|  | if (hid->quirks & HID_QUIRK_ALWAYS_POLL) { | 
|  | ret = usb_autopm_get_interface(usbhid->intf); | 
|  | if (ret) | 
|  | goto fail; | 
|  | usbhid->intf->needs_remote_wakeup = 1; | 
|  | ret = hid_start_in(hid); | 
|  | if (ret) { | 
|  | dev_err(&hid->dev, | 
|  | "failed to start in urb: %d\n", ret); | 
|  | } | 
|  | usb_autopm_put_interface(usbhid->intf); | 
|  | } | 
|  |  | 
|  | /* Some keyboards don't work until their LEDs have been set. | 
|  | * Since BIOSes do set the LEDs, it must be safe for any device | 
|  | * that supports the keyboard boot protocol. | 
|  | * In addition, enable remote wakeup by default for all keyboard | 
|  | * devices supporting the boot protocol. | 
|  | */ | 
|  | if (interface->desc.bInterfaceSubClass == USB_INTERFACE_SUBCLASS_BOOT && | 
|  | interface->desc.bInterfaceProtocol == | 
|  | USB_INTERFACE_PROTOCOL_KEYBOARD) { | 
|  | usbhid_set_leds(hid); | 
|  | device_set_wakeup_enable(&dev->dev, 1); | 
|  | } | 
|  | return 0; | 
|  |  | 
|  | fail: | 
|  | usb_free_urb(usbhid->urbin); | 
|  | usb_free_urb(usbhid->urbout); | 
|  | usb_free_urb(usbhid->urbctrl); | 
|  | usbhid->urbin = NULL; | 
|  | usbhid->urbout = NULL; | 
|  | usbhid->urbctrl = NULL; | 
|  | hid_free_buffers(dev, hid); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void usbhid_stop(struct hid_device *hid) | 
|  | { | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  |  | 
|  | if (WARN_ON(!usbhid)) | 
|  | return; | 
|  |  | 
|  | if (hid->quirks & HID_QUIRK_ALWAYS_POLL) | 
|  | usbhid->intf->needs_remote_wakeup = 0; | 
|  |  | 
|  | clear_bit(HID_STARTED, &usbhid->iofl); | 
|  | spin_lock_irq(&usbhid->lock);	/* Sync with error and led handlers */ | 
|  | set_bit(HID_DISCONNECTED, &usbhid->iofl); | 
|  | spin_unlock_irq(&usbhid->lock); | 
|  | usb_kill_urb(usbhid->urbin); | 
|  | usb_kill_urb(usbhid->urbout); | 
|  | usb_kill_urb(usbhid->urbctrl); | 
|  |  | 
|  | hid_cancel_delayed_stuff(usbhid); | 
|  |  | 
|  | hid->claimed = 0; | 
|  |  | 
|  | usb_free_urb(usbhid->urbin); | 
|  | usb_free_urb(usbhid->urbctrl); | 
|  | usb_free_urb(usbhid->urbout); | 
|  | usbhid->urbin = NULL; /* don't mess up next start */ | 
|  | usbhid->urbctrl = NULL; | 
|  | usbhid->urbout = NULL; | 
|  |  | 
|  | hid_free_buffers(hid_to_usb_dev(hid), hid); | 
|  | } | 
|  |  | 
|  | static int usbhid_power(struct hid_device *hid, int lvl) | 
|  | { | 
|  | int r = 0; | 
|  |  | 
|  | switch (lvl) { | 
|  | case PM_HINT_FULLON: | 
|  | r = usbhid_get_power(hid); | 
|  | break; | 
|  | case PM_HINT_NORMAL: | 
|  | usbhid_put_power(hid); | 
|  | break; | 
|  | } | 
|  | return r; | 
|  | } | 
|  |  | 
|  | static void usbhid_request(struct hid_device *hid, struct hid_report *rep, int reqtype) | 
|  | { | 
|  | switch (reqtype) { | 
|  | case HID_REQ_GET_REPORT: | 
|  | usbhid_submit_report(hid, rep, USB_DIR_IN); | 
|  | break; | 
|  | case HID_REQ_SET_REPORT: | 
|  | usbhid_submit_report(hid, rep, USB_DIR_OUT); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int usbhid_raw_request(struct hid_device *hid, unsigned char reportnum, | 
|  | __u8 *buf, size_t len, unsigned char rtype, | 
|  | int reqtype) | 
|  | { | 
|  | switch (reqtype) { | 
|  | case HID_REQ_GET_REPORT: | 
|  | return usbhid_get_raw_report(hid, reportnum, buf, len, rtype); | 
|  | case HID_REQ_SET_REPORT: | 
|  | return usbhid_set_raw_report(hid, reportnum, buf, len, rtype); | 
|  | default: | 
|  | return -EIO; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int usbhid_idle(struct hid_device *hid, int report, int idle, | 
|  | int reqtype) | 
|  | { | 
|  | struct usb_device *dev = hid_to_usb_dev(hid); | 
|  | struct usb_interface *intf = to_usb_interface(hid->dev.parent); | 
|  | struct usb_host_interface *interface = intf->cur_altsetting; | 
|  | int ifnum = interface->desc.bInterfaceNumber; | 
|  |  | 
|  | if (reqtype != HID_REQ_SET_IDLE) | 
|  | return -EINVAL; | 
|  |  | 
|  | return hid_set_idle(dev, ifnum, report, idle); | 
|  | } | 
|  |  | 
|  | static struct hid_ll_driver usb_hid_driver = { | 
|  | .parse = usbhid_parse, | 
|  | .start = usbhid_start, | 
|  | .stop = usbhid_stop, | 
|  | .open = usbhid_open, | 
|  | .close = usbhid_close, | 
|  | .power = usbhid_power, | 
|  | .request = usbhid_request, | 
|  | .wait = usbhid_wait_io, | 
|  | .raw_request = usbhid_raw_request, | 
|  | .output_report = usbhid_output_report, | 
|  | .idle = usbhid_idle, | 
|  | }; | 
|  |  | 
|  | static int usbhid_probe(struct usb_interface *intf, const struct usb_device_id *id) | 
|  | { | 
|  | struct usb_host_interface *interface = intf->cur_altsetting; | 
|  | struct usb_device *dev = interface_to_usbdev(intf); | 
|  | struct usbhid_device *usbhid; | 
|  | struct hid_device *hid; | 
|  | unsigned int n, has_in = 0; | 
|  | size_t len; | 
|  | int ret; | 
|  |  | 
|  | dbg_hid("HID probe called for ifnum %d\n", | 
|  | intf->altsetting->desc.bInterfaceNumber); | 
|  |  | 
|  | for (n = 0; n < interface->desc.bNumEndpoints; n++) | 
|  | if (usb_endpoint_is_int_in(&interface->endpoint[n].desc)) | 
|  | has_in++; | 
|  | if (!has_in) { | 
|  | hid_err(intf, "couldn't find an input interrupt endpoint\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | hid = hid_allocate_device(); | 
|  | if (IS_ERR(hid)) | 
|  | return PTR_ERR(hid); | 
|  |  | 
|  | usb_set_intfdata(intf, hid); | 
|  | hid->ll_driver = &usb_hid_driver; | 
|  | hid->ff_init = hid_pidff_init; | 
|  | #ifdef CONFIG_USB_HIDDEV | 
|  | hid->hiddev_connect = hiddev_connect; | 
|  | hid->hiddev_disconnect = hiddev_disconnect; | 
|  | hid->hiddev_hid_event = hiddev_hid_event; | 
|  | hid->hiddev_report_event = hiddev_report_event; | 
|  | #endif | 
|  | hid->dev.parent = &intf->dev; | 
|  | hid->bus = BUS_USB; | 
|  | hid->vendor = le16_to_cpu(dev->descriptor.idVendor); | 
|  | hid->product = le16_to_cpu(dev->descriptor.idProduct); | 
|  | hid->name[0] = 0; | 
|  | hid->quirks = usbhid_lookup_quirk(hid->vendor, hid->product); | 
|  | if (intf->cur_altsetting->desc.bInterfaceProtocol == | 
|  | USB_INTERFACE_PROTOCOL_MOUSE) | 
|  | hid->type = HID_TYPE_USBMOUSE; | 
|  | else if (intf->cur_altsetting->desc.bInterfaceProtocol == 0) | 
|  | hid->type = HID_TYPE_USBNONE; | 
|  |  | 
|  | if (dev->manufacturer) | 
|  | strlcpy(hid->name, dev->manufacturer, sizeof(hid->name)); | 
|  |  | 
|  | if (dev->product) { | 
|  | if (dev->manufacturer) | 
|  | strlcat(hid->name, " ", sizeof(hid->name)); | 
|  | strlcat(hid->name, dev->product, sizeof(hid->name)); | 
|  | } | 
|  |  | 
|  | if (!strlen(hid->name)) | 
|  | snprintf(hid->name, sizeof(hid->name), "HID %04x:%04x", | 
|  | le16_to_cpu(dev->descriptor.idVendor), | 
|  | le16_to_cpu(dev->descriptor.idProduct)); | 
|  |  | 
|  | usb_make_path(dev, hid->phys, sizeof(hid->phys)); | 
|  | strlcat(hid->phys, "/input", sizeof(hid->phys)); | 
|  | len = strlen(hid->phys); | 
|  | if (len < sizeof(hid->phys) - 1) | 
|  | snprintf(hid->phys + len, sizeof(hid->phys) - len, | 
|  | "%d", intf->altsetting[0].desc.bInterfaceNumber); | 
|  |  | 
|  | if (usb_string(dev, dev->descriptor.iSerialNumber, hid->uniq, 64) <= 0) | 
|  | hid->uniq[0] = 0; | 
|  |  | 
|  | usbhid = kzalloc(sizeof(*usbhid), GFP_KERNEL); | 
|  | if (usbhid == NULL) { | 
|  | ret = -ENOMEM; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | hid->driver_data = usbhid; | 
|  | usbhid->hid = hid; | 
|  | usbhid->intf = intf; | 
|  | usbhid->ifnum = interface->desc.bInterfaceNumber; | 
|  |  | 
|  | init_waitqueue_head(&usbhid->wait); | 
|  | INIT_WORK(&usbhid->reset_work, hid_reset); | 
|  | setup_timer(&usbhid->io_retry, hid_retry_timeout, (unsigned long) hid); | 
|  | spin_lock_init(&usbhid->lock); | 
|  |  | 
|  | ret = hid_add_device(hid); | 
|  | if (ret) { | 
|  | if (ret != -ENODEV) | 
|  | hid_err(intf, "can't add hid device: %d\n", ret); | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | err_free: | 
|  | kfree(usbhid); | 
|  | err: | 
|  | hid_destroy_device(hid); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void usbhid_disconnect(struct usb_interface *intf) | 
|  | { | 
|  | struct hid_device *hid = usb_get_intfdata(intf); | 
|  | struct usbhid_device *usbhid; | 
|  |  | 
|  | if (WARN_ON(!hid)) | 
|  | return; | 
|  |  | 
|  | usbhid = hid->driver_data; | 
|  | spin_lock_irq(&usbhid->lock);	/* Sync with error and led handlers */ | 
|  | set_bit(HID_DISCONNECTED, &usbhid->iofl); | 
|  | spin_unlock_irq(&usbhid->lock); | 
|  | hid_destroy_device(hid); | 
|  | kfree(usbhid); | 
|  | } | 
|  |  | 
|  | static void hid_cancel_delayed_stuff(struct usbhid_device *usbhid) | 
|  | { | 
|  | del_timer_sync(&usbhid->io_retry); | 
|  | cancel_work_sync(&usbhid->reset_work); | 
|  | } | 
|  |  | 
|  | static void hid_cease_io(struct usbhid_device *usbhid) | 
|  | { | 
|  | del_timer_sync(&usbhid->io_retry); | 
|  | usb_kill_urb(usbhid->urbin); | 
|  | usb_kill_urb(usbhid->urbctrl); | 
|  | usb_kill_urb(usbhid->urbout); | 
|  | } | 
|  |  | 
|  | /* Treat USB reset pretty much the same as suspend/resume */ | 
|  | static int hid_pre_reset(struct usb_interface *intf) | 
|  | { | 
|  | struct hid_device *hid = usb_get_intfdata(intf); | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  |  | 
|  | spin_lock_irq(&usbhid->lock); | 
|  | set_bit(HID_RESET_PENDING, &usbhid->iofl); | 
|  | spin_unlock_irq(&usbhid->lock); | 
|  | hid_cease_io(usbhid); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Same routine used for post_reset and reset_resume */ | 
|  | static int hid_post_reset(struct usb_interface *intf) | 
|  | { | 
|  | struct usb_device *dev = interface_to_usbdev (intf); | 
|  | struct hid_device *hid = usb_get_intfdata(intf); | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  | struct usb_host_interface *interface = intf->cur_altsetting; | 
|  | int status; | 
|  | char *rdesc; | 
|  |  | 
|  | /* Fetch and examine the HID report descriptor. If this | 
|  | * has changed, then rebind. Since usbcore's check of the | 
|  | * configuration descriptors passed, we already know that | 
|  | * the size of the HID report descriptor has not changed. | 
|  | */ | 
|  | rdesc = kmalloc(hid->dev_rsize, GFP_KERNEL); | 
|  | if (!rdesc) { | 
|  | dbg_hid("couldn't allocate rdesc memory (post_reset)\n"); | 
|  | return 1; | 
|  | } | 
|  | status = hid_get_class_descriptor(dev, | 
|  | interface->desc.bInterfaceNumber, | 
|  | HID_DT_REPORT, rdesc, hid->dev_rsize); | 
|  | if (status < 0) { | 
|  | dbg_hid("reading report descriptor failed (post_reset)\n"); | 
|  | kfree(rdesc); | 
|  | return 1; | 
|  | } | 
|  | status = memcmp(rdesc, hid->dev_rdesc, hid->dev_rsize); | 
|  | kfree(rdesc); | 
|  | if (status != 0) { | 
|  | dbg_hid("report descriptor changed\n"); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | spin_lock_irq(&usbhid->lock); | 
|  | clear_bit(HID_RESET_PENDING, &usbhid->iofl); | 
|  | spin_unlock_irq(&usbhid->lock); | 
|  | hid_set_idle(dev, intf->cur_altsetting->desc.bInterfaceNumber, 0, 0); | 
|  | status = hid_start_in(hid); | 
|  | if (status < 0) | 
|  | hid_io_error(hid); | 
|  | usbhid_restart_queues(usbhid); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int usbhid_get_power(struct hid_device *hid) | 
|  | { | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  |  | 
|  | return usb_autopm_get_interface(usbhid->intf); | 
|  | } | 
|  |  | 
|  | void usbhid_put_power(struct hid_device *hid) | 
|  | { | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  |  | 
|  | usb_autopm_put_interface(usbhid->intf); | 
|  | } | 
|  |  | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static int hid_resume_common(struct hid_device *hid, bool driver_suspended) | 
|  | { | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  | int status; | 
|  |  | 
|  | spin_lock_irq(&usbhid->lock); | 
|  | clear_bit(HID_SUSPENDED, &usbhid->iofl); | 
|  | usbhid_mark_busy(usbhid); | 
|  |  | 
|  | if (test_bit(HID_CLEAR_HALT, &usbhid->iofl) || | 
|  | test_bit(HID_RESET_PENDING, &usbhid->iofl)) | 
|  | schedule_work(&usbhid->reset_work); | 
|  | usbhid->retry_delay = 0; | 
|  |  | 
|  | usbhid_restart_queues(usbhid); | 
|  | spin_unlock_irq(&usbhid->lock); | 
|  |  | 
|  | status = hid_start_in(hid); | 
|  | if (status < 0) | 
|  | hid_io_error(hid); | 
|  |  | 
|  | if (driver_suspended && hid->driver && hid->driver->resume) | 
|  | status = hid->driver->resume(hid); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static int hid_suspend(struct usb_interface *intf, pm_message_t message) | 
|  | { | 
|  | struct hid_device *hid = usb_get_intfdata(intf); | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  | int status = 0; | 
|  | bool driver_suspended = false; | 
|  | unsigned int ledcount; | 
|  |  | 
|  | if (PMSG_IS_AUTO(message)) { | 
|  | ledcount = hidinput_count_leds(hid); | 
|  | spin_lock_irq(&usbhid->lock);	/* Sync with error handler */ | 
|  | if (!test_bit(HID_RESET_PENDING, &usbhid->iofl) | 
|  | && !test_bit(HID_CLEAR_HALT, &usbhid->iofl) | 
|  | && !test_bit(HID_OUT_RUNNING, &usbhid->iofl) | 
|  | && !test_bit(HID_CTRL_RUNNING, &usbhid->iofl) | 
|  | && !test_bit(HID_KEYS_PRESSED, &usbhid->iofl) | 
|  | && (!ledcount || ignoreled)) | 
|  | { | 
|  | set_bit(HID_SUSPENDED, &usbhid->iofl); | 
|  | spin_unlock_irq(&usbhid->lock); | 
|  | if (hid->driver && hid->driver->suspend) { | 
|  | status = hid->driver->suspend(hid, message); | 
|  | if (status < 0) | 
|  | goto failed; | 
|  | } | 
|  | driver_suspended = true; | 
|  | } else { | 
|  | usbhid_mark_busy(usbhid); | 
|  | spin_unlock_irq(&usbhid->lock); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | } else { | 
|  | /* TODO: resume() might need to handle suspend failure */ | 
|  | if (hid->driver && hid->driver->suspend) | 
|  | status = hid->driver->suspend(hid, message); | 
|  | driver_suspended = true; | 
|  | spin_lock_irq(&usbhid->lock); | 
|  | set_bit(HID_SUSPENDED, &usbhid->iofl); | 
|  | spin_unlock_irq(&usbhid->lock); | 
|  | if (usbhid_wait_io(hid) < 0) | 
|  | status = -EIO; | 
|  | } | 
|  |  | 
|  | hid_cancel_delayed_stuff(usbhid); | 
|  | hid_cease_io(usbhid); | 
|  |  | 
|  | if (PMSG_IS_AUTO(message) && test_bit(HID_KEYS_PRESSED, &usbhid->iofl)) { | 
|  | /* lost race against keypresses */ | 
|  | status = -EBUSY; | 
|  | goto failed; | 
|  | } | 
|  | dev_dbg(&intf->dev, "suspend\n"); | 
|  | return status; | 
|  |  | 
|  | failed: | 
|  | hid_resume_common(hid, driver_suspended); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static int hid_resume(struct usb_interface *intf) | 
|  | { | 
|  | struct hid_device *hid = usb_get_intfdata (intf); | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  | int status; | 
|  |  | 
|  | if (!test_bit(HID_STARTED, &usbhid->iofl)) | 
|  | return 0; | 
|  |  | 
|  | status = hid_resume_common(hid, true); | 
|  | dev_dbg(&intf->dev, "resume status %d\n", status); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int hid_reset_resume(struct usb_interface *intf) | 
|  | { | 
|  | struct hid_device *hid = usb_get_intfdata(intf); | 
|  | struct usbhid_device *usbhid = hid->driver_data; | 
|  | int status; | 
|  |  | 
|  | clear_bit(HID_SUSPENDED, &usbhid->iofl); | 
|  | status = hid_post_reset(intf); | 
|  | if (status >= 0 && hid->driver && hid->driver->reset_resume) { | 
|  | int ret = hid->driver->reset_resume(hid); | 
|  | if (ret < 0) | 
|  | status = ret; | 
|  | } | 
|  | return status; | 
|  | } | 
|  |  | 
|  | #endif /* CONFIG_PM */ | 
|  |  | 
|  | static const struct usb_device_id hid_usb_ids[] = { | 
|  | { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS, | 
|  | .bInterfaceClass = USB_INTERFACE_CLASS_HID }, | 
|  | { }						/* Terminating entry */ | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE (usb, hid_usb_ids); | 
|  |  | 
|  | static struct usb_driver hid_driver = { | 
|  | .name =		"usbhid", | 
|  | .probe =	usbhid_probe, | 
|  | .disconnect =	usbhid_disconnect, | 
|  | #ifdef CONFIG_PM | 
|  | .suspend =	hid_suspend, | 
|  | .resume =	hid_resume, | 
|  | .reset_resume =	hid_reset_resume, | 
|  | #endif | 
|  | .pre_reset =	hid_pre_reset, | 
|  | .post_reset =	hid_post_reset, | 
|  | .id_table =	hid_usb_ids, | 
|  | .supports_autosuspend = 1, | 
|  | }; | 
|  |  | 
|  | struct usb_interface *usbhid_find_interface(int minor) | 
|  | { | 
|  | return usb_find_interface(&hid_driver, minor); | 
|  | } | 
|  |  | 
|  | static int __init hid_init(void) | 
|  | { | 
|  | int retval = -ENOMEM; | 
|  |  | 
|  | retval = usbhid_quirks_init(quirks_param); | 
|  | if (retval) | 
|  | goto usbhid_quirks_init_fail; | 
|  | retval = usb_register(&hid_driver); | 
|  | if (retval) | 
|  | goto usb_register_fail; | 
|  | printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n"); | 
|  |  | 
|  | return 0; | 
|  | usb_register_fail: | 
|  | usbhid_quirks_exit(); | 
|  | usbhid_quirks_init_fail: | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static void __exit hid_exit(void) | 
|  | { | 
|  | usb_deregister(&hid_driver); | 
|  | usbhid_quirks_exit(); | 
|  | } | 
|  |  | 
|  | module_init(hid_init); | 
|  | module_exit(hid_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Andreas Gal"); | 
|  | MODULE_AUTHOR("Vojtech Pavlik"); | 
|  | MODULE_AUTHOR("Jiri Kosina"); | 
|  | MODULE_DESCRIPTION(DRIVER_DESC); | 
|  | MODULE_LICENSE(DRIVER_LICENSE); |