|  | /* | 
|  | * Common library for ADIS16XXX devices | 
|  | * | 
|  | * Copyright 2012 Analog Devices Inc. | 
|  | *   Author: Lars-Peter Clausen <lars@metafoo.de> | 
|  | * | 
|  | * Licensed under the GPL-2 or later. | 
|  | */ | 
|  |  | 
|  | #include <linux/export.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/spi/spi.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | #include <linux/iio/iio.h> | 
|  | #include <linux/iio/buffer.h> | 
|  | #include <linux/iio/trigger_consumer.h> | 
|  | #include <linux/iio/triggered_buffer.h> | 
|  | #include <linux/iio/imu/adis.h> | 
|  |  | 
|  | int adis_update_scan_mode(struct iio_dev *indio_dev, | 
|  | const unsigned long *scan_mask) | 
|  | { | 
|  | struct adis *adis = iio_device_get_drvdata(indio_dev); | 
|  | const struct iio_chan_spec *chan; | 
|  | unsigned int scan_count; | 
|  | unsigned int i, j; | 
|  | __be16 *tx, *rx; | 
|  |  | 
|  | kfree(adis->xfer); | 
|  | kfree(adis->buffer); | 
|  |  | 
|  | scan_count = indio_dev->scan_bytes / 2; | 
|  |  | 
|  | adis->xfer = kcalloc(scan_count + 1, sizeof(*adis->xfer), GFP_KERNEL); | 
|  | if (!adis->xfer) | 
|  | return -ENOMEM; | 
|  |  | 
|  | adis->buffer = kzalloc(indio_dev->scan_bytes * 2, GFP_KERNEL); | 
|  | if (!adis->buffer) | 
|  | return -ENOMEM; | 
|  |  | 
|  | rx = adis->buffer; | 
|  | tx = rx + indio_dev->scan_bytes; | 
|  |  | 
|  | spi_message_init(&adis->msg); | 
|  |  | 
|  | for (j = 0; j <= scan_count; j++) { | 
|  | adis->xfer[j].bits_per_word = 8; | 
|  | if (j != scan_count) | 
|  | adis->xfer[j].cs_change = 1; | 
|  | adis->xfer[j].len = 2; | 
|  | adis->xfer[j].delay_usecs = adis->data->read_delay; | 
|  | if (j < scan_count) | 
|  | adis->xfer[j].tx_buf = &tx[j]; | 
|  | if (j >= 1) | 
|  | adis->xfer[j].rx_buf = &rx[j - 1]; | 
|  | spi_message_add_tail(&adis->xfer[j], &adis->msg); | 
|  | } | 
|  |  | 
|  | chan = indio_dev->channels; | 
|  | for (i = 0; i < indio_dev->num_channels; i++, chan++) { | 
|  | if (!test_bit(chan->scan_index, scan_mask)) | 
|  | continue; | 
|  | if (chan->scan_type.storagebits == 32) | 
|  | *tx++ = cpu_to_be16((chan->address + 2) << 8); | 
|  | *tx++ = cpu_to_be16(chan->address << 8); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(adis_update_scan_mode); | 
|  |  | 
|  | static irqreturn_t adis_trigger_handler(int irq, void *p) | 
|  | { | 
|  | struct iio_poll_func *pf = p; | 
|  | struct iio_dev *indio_dev = pf->indio_dev; | 
|  | struct adis *adis = iio_device_get_drvdata(indio_dev); | 
|  | int ret; | 
|  |  | 
|  | if (!adis->buffer) | 
|  | return -ENOMEM; | 
|  |  | 
|  | if (adis->data->has_paging) { | 
|  | mutex_lock(&adis->txrx_lock); | 
|  | if (adis->current_page != 0) { | 
|  | adis->tx[0] = ADIS_WRITE_REG(ADIS_REG_PAGE_ID); | 
|  | adis->tx[1] = 0; | 
|  | spi_write(adis->spi, adis->tx, 2); | 
|  | } | 
|  | } | 
|  |  | 
|  | ret = spi_sync(adis->spi, &adis->msg); | 
|  | if (ret) | 
|  | dev_err(&adis->spi->dev, "Failed to read data: %d", ret); | 
|  |  | 
|  |  | 
|  | if (adis->data->has_paging) { | 
|  | adis->current_page = 0; | 
|  | mutex_unlock(&adis->txrx_lock); | 
|  | } | 
|  |  | 
|  | iio_push_to_buffers_with_timestamp(indio_dev, adis->buffer, | 
|  | pf->timestamp); | 
|  |  | 
|  | iio_trigger_notify_done(indio_dev->trig); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * adis_setup_buffer_and_trigger() - Sets up buffer and trigger for the adis device | 
|  | * @adis: The adis device. | 
|  | * @indio_dev: The IIO device. | 
|  | * @trigger_handler: Optional trigger handler, may be NULL. | 
|  | * | 
|  | * Returns 0 on success, a negative error code otherwise. | 
|  | * | 
|  | * This function sets up the buffer and trigger for a adis devices.  If | 
|  | * 'trigger_handler' is NULL the default trigger handler will be used. The | 
|  | * default trigger handler will simply read the registers assigned to the | 
|  | * currently active channels. | 
|  | * | 
|  | * adis_cleanup_buffer_and_trigger() should be called to free the resources | 
|  | * allocated by this function. | 
|  | */ | 
|  | int adis_setup_buffer_and_trigger(struct adis *adis, struct iio_dev *indio_dev, | 
|  | irqreturn_t (*trigger_handler)(int, void *)) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | if (!trigger_handler) | 
|  | trigger_handler = adis_trigger_handler; | 
|  |  | 
|  | ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, | 
|  | trigger_handler, NULL); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (adis->spi->irq) { | 
|  | ret = adis_probe_trigger(adis, indio_dev); | 
|  | if (ret) | 
|  | goto error_buffer_cleanup; | 
|  | } | 
|  | return 0; | 
|  |  | 
|  | error_buffer_cleanup: | 
|  | iio_triggered_buffer_cleanup(indio_dev); | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(adis_setup_buffer_and_trigger); | 
|  |  | 
|  | /** | 
|  | * adis_cleanup_buffer_and_trigger() - Free buffer and trigger resources | 
|  | * @adis: The adis device. | 
|  | * @indio_dev: The IIO device. | 
|  | * | 
|  | * Frees resources allocated by adis_setup_buffer_and_trigger() | 
|  | */ | 
|  | void adis_cleanup_buffer_and_trigger(struct adis *adis, | 
|  | struct iio_dev *indio_dev) | 
|  | { | 
|  | if (adis->spi->irq) | 
|  | adis_remove_trigger(adis); | 
|  | kfree(adis->buffer); | 
|  | kfree(adis->xfer); | 
|  | iio_triggered_buffer_cleanup(indio_dev); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(adis_cleanup_buffer_and_trigger); |