|  | /* | 
|  | * This file is part of wl1251 | 
|  | * | 
|  | * Copyright (c) 1998-2007 Texas Instruments Incorporated | 
|  | * Copyright (C) 2008 Nokia Corporation | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * version 2 as published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but | 
|  | * WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | * General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | 
|  | * 02110-1301 USA | 
|  | * | 
|  | */ | 
|  |  | 
|  | #ifndef __WL1251_CMD_H__ | 
|  | #define __WL1251_CMD_H__ | 
|  |  | 
|  | #include "wl1251.h" | 
|  |  | 
|  | #include <net/cfg80211.h> | 
|  |  | 
|  | struct acx_header; | 
|  |  | 
|  | int wl1251_cmd_send(struct wl1251 *wl, u16 type, void *buf, size_t buf_len); | 
|  | int wl1251_cmd_test(struct wl1251 *wl, void *buf, size_t buf_len, u8 answer); | 
|  | int wl1251_cmd_interrogate(struct wl1251 *wl, u16 id, void *buf, size_t len); | 
|  | int wl1251_cmd_configure(struct wl1251 *wl, u16 id, void *buf, size_t len); | 
|  | int wl1251_cmd_vbm(struct wl1251 *wl, u8 identity, | 
|  | void *bitmap, u16 bitmap_len, u8 bitmap_control); | 
|  | int wl1251_cmd_data_path_rx(struct wl1251 *wl, u8 channel, bool enable); | 
|  | int wl1251_cmd_data_path_tx(struct wl1251 *wl, u8 channel, bool enable); | 
|  | int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u8 channel, | 
|  | u16 beacon_interval, u8 dtim_interval); | 
|  | int wl1251_cmd_ps_mode(struct wl1251 *wl, u8 ps_mode); | 
|  | int wl1251_cmd_read_memory(struct wl1251 *wl, u32 addr, void *answer, | 
|  | size_t len); | 
|  | int wl1251_cmd_template_set(struct wl1251 *wl, u16 cmd_id, | 
|  | void *buf, size_t buf_len); | 
|  | int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len, | 
|  | struct ieee80211_channel *channels[], | 
|  | unsigned int n_channels, unsigned int n_probes); | 
|  | int wl1251_cmd_trigger_scan_to(struct wl1251 *wl, u32 timeout); | 
|  |  | 
|  | /* unit ms */ | 
|  | #define WL1251_COMMAND_TIMEOUT 2000 | 
|  |  | 
|  | enum wl1251_commands { | 
|  | CMD_RESET           = 0, | 
|  | CMD_INTERROGATE     = 1,    /*use this to read information elements*/ | 
|  | CMD_CONFIGURE       = 2,    /*use this to write information elements*/ | 
|  | CMD_ENABLE_RX       = 3, | 
|  | CMD_ENABLE_TX       = 4, | 
|  | CMD_DISABLE_RX      = 5, | 
|  | CMD_DISABLE_TX      = 6, | 
|  | CMD_SCAN            = 8, | 
|  | CMD_STOP_SCAN       = 9, | 
|  | CMD_VBM             = 10, | 
|  | CMD_START_JOIN      = 11, | 
|  | CMD_SET_KEYS        = 12, | 
|  | CMD_READ_MEMORY     = 13, | 
|  | CMD_WRITE_MEMORY    = 14, | 
|  | CMD_BEACON          = 19, | 
|  | CMD_PROBE_RESP      = 20, | 
|  | CMD_NULL_DATA       = 21, | 
|  | CMD_PROBE_REQ       = 22, | 
|  | CMD_TEST            = 23, | 
|  | CMD_RADIO_CALIBRATE     = 25,   /* OBSOLETE */ | 
|  | CMD_ENABLE_RX_PATH      = 27,   /* OBSOLETE */ | 
|  | CMD_NOISE_HIST      = 28, | 
|  | CMD_RX_RESET        = 29, | 
|  | CMD_PS_POLL         = 30, | 
|  | CMD_QOS_NULL_DATA   = 31, | 
|  | CMD_LNA_CONTROL     = 32, | 
|  | CMD_SET_BCN_MODE    = 33, | 
|  | CMD_MEASUREMENT      = 34, | 
|  | CMD_STOP_MEASUREMENT = 35, | 
|  | CMD_DISCONNECT       = 36, | 
|  | CMD_SET_PS_MODE      = 37, | 
|  | CMD_CHANNEL_SWITCH   = 38, | 
|  | CMD_STOP_CHANNEL_SWICTH = 39, | 
|  | CMD_AP_DISCOVERY     = 40, | 
|  | CMD_STOP_AP_DISCOVERY = 41, | 
|  | CMD_SPS_SCAN = 42, | 
|  | CMD_STOP_SPS_SCAN = 43, | 
|  | CMD_HEALTH_CHECK     = 45, | 
|  | CMD_DEBUG            = 46, | 
|  | CMD_TRIGGER_SCAN_TO  = 47, | 
|  |  | 
|  | NUM_COMMANDS, | 
|  | MAX_COMMAND_ID = 0xFFFF, | 
|  | }; | 
|  |  | 
|  | #define MAX_CMD_PARAMS 572 | 
|  |  | 
|  | struct wl1251_cmd_header { | 
|  | u16 id; | 
|  | u16 status; | 
|  | /* payload */ | 
|  | u8 data[0]; | 
|  | } __packed; | 
|  |  | 
|  | struct  wl1251_command { | 
|  | struct wl1251_cmd_header header; | 
|  | u8  parameters[MAX_CMD_PARAMS]; | 
|  | } __packed; | 
|  |  | 
|  | enum { | 
|  | CMD_MAILBOX_IDLE              		=  0, | 
|  | CMD_STATUS_SUCCESS            		=  1, | 
|  | CMD_STATUS_UNKNOWN_CMD        		=  2, | 
|  | CMD_STATUS_UNKNOWN_IE         		=  3, | 
|  | CMD_STATUS_REJECT_MEAS_SG_ACTIVE 	= 11, | 
|  | CMD_STATUS_RX_BUSY            		= 13, | 
|  | CMD_STATUS_INVALID_PARAM      		= 14, | 
|  | CMD_STATUS_TEMPLATE_TOO_LARGE 		= 15, | 
|  | CMD_STATUS_OUT_OF_MEMORY      		= 16, | 
|  | CMD_STATUS_STA_TABLE_FULL     		= 17, | 
|  | CMD_STATUS_RADIO_ERROR        		= 18, | 
|  | CMD_STATUS_WRONG_NESTING      		= 19, | 
|  | CMD_STATUS_TIMEOUT            		= 21, /* Driver internal use.*/ | 
|  | CMD_STATUS_FW_RESET           		= 22, /* Driver internal use.*/ | 
|  | MAX_COMMAND_STATUS            		= 0xff | 
|  | }; | 
|  |  | 
|  |  | 
|  | /* | 
|  | * CMD_READ_MEMORY | 
|  | * | 
|  | * The host issues this command to read the WiLink device memory/registers. | 
|  | * | 
|  | * Note: The Base Band address has special handling (16 bits registers and | 
|  | * addresses). For more information, see the hardware specification. | 
|  | */ | 
|  | /* | 
|  | * CMD_WRITE_MEMORY | 
|  | * | 
|  | * The host issues this command to write the WiLink device memory/registers. | 
|  | * | 
|  | * The Base Band address has special handling (16 bits registers and | 
|  | * addresses). For more information, see the hardware specification. | 
|  | */ | 
|  | #define MAX_READ_SIZE 256 | 
|  |  | 
|  | struct cmd_read_write_memory { | 
|  | struct wl1251_cmd_header header; | 
|  |  | 
|  | /* The address of the memory to read from or write to.*/ | 
|  | u32 addr; | 
|  |  | 
|  | /* The amount of data in bytes to read from or write to the WiLink | 
|  | * device.*/ | 
|  | u32 size; | 
|  |  | 
|  | /* The actual value read from or written to the Wilink. The source | 
|  | of this field is the Host in WRITE command or the Wilink in READ | 
|  | command. */ | 
|  | u8 value[MAX_READ_SIZE]; | 
|  | } __packed; | 
|  |  | 
|  | #define CMDMBOX_HEADER_LEN 4 | 
|  | #define CMDMBOX_INFO_ELEM_HEADER_LEN 4 | 
|  |  | 
|  | #define WL1251_SCAN_OPT_PASSIVE		1 | 
|  | #define WL1251_SCAN_OPT_5GHZ_BAND	2 | 
|  | #define WL1251_SCAN_OPT_TRIGGERD_SCAN	4 | 
|  | #define WL1251_SCAN_OPT_PRIORITY_HIGH	8 | 
|  |  | 
|  | #define WL1251_SCAN_MIN_DURATION 30000 | 
|  | #define WL1251_SCAN_MAX_DURATION 60000 | 
|  |  | 
|  | #define WL1251_SCAN_NUM_PROBES 3 | 
|  |  | 
|  | struct wl1251_scan_parameters { | 
|  | __le32 rx_config_options; | 
|  | __le32 rx_filter_options; | 
|  |  | 
|  | /* | 
|  | * Scan options: | 
|  | * bit 0: When this bit is set, passive scan. | 
|  | * bit 1: Band, when this bit is set we scan | 
|  | * in the 5Ghz band. | 
|  | * bit 2: voice mode, 0 for normal scan. | 
|  | * bit 3: scan priority, 1 for high priority. | 
|  | */ | 
|  | __le16 scan_options; | 
|  |  | 
|  | /* Number of channels to scan */ | 
|  | u8 num_channels; | 
|  |  | 
|  | /* Number opf probe requests to send, per channel */ | 
|  | u8 num_probe_requests; | 
|  |  | 
|  | /* Rate and modulation for probe requests */ | 
|  | __le16 tx_rate; | 
|  |  | 
|  | u8 tid_trigger; | 
|  | u8 ssid_len; | 
|  | u8 ssid[32]; | 
|  |  | 
|  | } __packed; | 
|  |  | 
|  | struct wl1251_scan_ch_parameters { | 
|  | __le32 min_duration; /* in TU */ | 
|  | __le32 max_duration; /* in TU */ | 
|  | u32 bssid_lsb; | 
|  | u16 bssid_msb; | 
|  |  | 
|  | /* | 
|  | * bits 0-3: Early termination count. | 
|  | * bits 4-5: Early termination condition. | 
|  | */ | 
|  | u8 early_termination; | 
|  |  | 
|  | u8 tx_power_att; | 
|  | u8 channel; | 
|  | u8 pad[3]; | 
|  | } __packed; | 
|  |  | 
|  | /* SCAN parameters */ | 
|  | #define SCAN_MAX_NUM_OF_CHANNELS 16 | 
|  |  | 
|  | struct wl1251_cmd_scan { | 
|  | struct wl1251_cmd_header header; | 
|  |  | 
|  | struct wl1251_scan_parameters params; | 
|  | struct wl1251_scan_ch_parameters channels[SCAN_MAX_NUM_OF_CHANNELS]; | 
|  | } __packed; | 
|  |  | 
|  | enum { | 
|  | BSS_TYPE_IBSS = 0, | 
|  | BSS_TYPE_STA_BSS = 2, | 
|  | BSS_TYPE_AP_BSS = 3, | 
|  | MAX_BSS_TYPE = 0xFF | 
|  | }; | 
|  |  | 
|  | #define JOIN_CMD_CTRL_TX_FLUSH             0x80 /* Firmware flushes all Tx */ | 
|  | #define JOIN_CMD_CTRL_EARLY_WAKEUP_ENABLE  0x01 /* Early wakeup time */ | 
|  |  | 
|  |  | 
|  | struct cmd_join { | 
|  | struct wl1251_cmd_header header; | 
|  |  | 
|  | u32 bssid_lsb; | 
|  | u16 bssid_msb; | 
|  | u16 beacon_interval; /* in TBTTs */ | 
|  | u32 rx_config_options; | 
|  | u32 rx_filter_options; | 
|  |  | 
|  | /* | 
|  | * The target uses this field to determine the rate at | 
|  | * which to transmit control frame responses (such as | 
|  | * ACK or CTS frames). | 
|  | */ | 
|  | u16 basic_rate_set; | 
|  | u8 dtim_interval; | 
|  | u8 tx_ctrl_frame_rate; /* OBSOLETE */ | 
|  | u8 tx_ctrl_frame_mod;  /* OBSOLETE */ | 
|  | /* | 
|  | * bits 0-2: This bitwise field specifies the type | 
|  | * of BSS to start or join (BSS_TYPE_*). | 
|  | * bit 4: Band - The radio band in which to join | 
|  | * or start. | 
|  | *  0 - 2.4GHz band | 
|  | *  1 - 5GHz band | 
|  | * bits 3, 5-7: Reserved | 
|  | */ | 
|  | u8 bss_type; | 
|  | u8 channel; | 
|  | u8 ssid_len; | 
|  | u8 ssid[IEEE80211_MAX_SSID_LEN]; | 
|  | u8 ctrl; /* JOIN_CMD_CTRL_* */ | 
|  | u8 tx_mgt_frame_rate; /* OBSOLETE */ | 
|  | u8 tx_mgt_frame_mod;  /* OBSOLETE */ | 
|  | u8 reserved; | 
|  | } __packed; | 
|  |  | 
|  | struct cmd_enabledisable_path { | 
|  | struct wl1251_cmd_header header; | 
|  |  | 
|  | u8 channel; | 
|  | u8 padding[3]; | 
|  | } __packed; | 
|  |  | 
|  | #define WL1251_MAX_TEMPLATE_SIZE 300 | 
|  |  | 
|  | struct wl1251_cmd_packet_template { | 
|  | struct wl1251_cmd_header header; | 
|  |  | 
|  | __le16 size; | 
|  | u8 data[0]; | 
|  | } __packed; | 
|  |  | 
|  | #define TIM_ELE_ID    5 | 
|  | #define PARTIAL_VBM_MAX    251 | 
|  |  | 
|  | struct wl1251_tim { | 
|  | u8 identity; | 
|  | u8 length; | 
|  | u8 dtim_count; | 
|  | u8 dtim_period; | 
|  | u8 bitmap_ctrl; | 
|  | u8 pvb_field[PARTIAL_VBM_MAX]; /* Partial Virtual Bitmap */ | 
|  | } __packed; | 
|  |  | 
|  | /* Virtual Bit Map update */ | 
|  | struct wl1251_cmd_vbm_update { | 
|  | struct wl1251_cmd_header header; | 
|  | __le16 len; | 
|  | u8  padding[2]; | 
|  | struct wl1251_tim tim; | 
|  | } __packed; | 
|  |  | 
|  | enum wl1251_cmd_ps_mode { | 
|  | CHIP_ACTIVE_MODE, | 
|  | CHIP_POWER_SAVE_MODE | 
|  | }; | 
|  |  | 
|  | struct wl1251_cmd_ps_params { | 
|  | struct wl1251_cmd_header header; | 
|  |  | 
|  | u8 ps_mode; /* STATION_* */ | 
|  | u8 send_null_data; /* Do we have to send NULL data packet ? */ | 
|  | u8 retries; /* Number of retires for the initial NULL data packet */ | 
|  |  | 
|  | /* | 
|  | * TUs during which the target stays awake after switching | 
|  | * to power save mode. | 
|  | */ | 
|  | u8 hang_over_period; | 
|  | u16 null_data_rate; | 
|  | u8 pad[2]; | 
|  | } __packed; | 
|  |  | 
|  | struct wl1251_cmd_trigger_scan_to { | 
|  | struct wl1251_cmd_header header; | 
|  |  | 
|  | u32 timeout; | 
|  | } __packed; | 
|  |  | 
|  | /* HW encryption keys */ | 
|  | #define NUM_ACCESS_CATEGORIES_COPY 4 | 
|  | #define MAX_KEY_SIZE 32 | 
|  |  | 
|  | /* When set, disable HW encryption */ | 
|  | #define DF_ENCRYPTION_DISABLE      0x01 | 
|  | /* When set, disable HW decryption */ | 
|  | #define DF_SNIFF_MODE_ENABLE       0x80 | 
|  |  | 
|  | enum wl1251_cmd_key_action { | 
|  | KEY_ADD_OR_REPLACE = 1, | 
|  | KEY_REMOVE         = 2, | 
|  | KEY_SET_ID         = 3, | 
|  | MAX_KEY_ACTION     = 0xffff, | 
|  | }; | 
|  |  | 
|  | enum wl1251_cmd_key_type { | 
|  | KEY_WEP_DEFAULT       = 0, | 
|  | KEY_WEP_ADDR          = 1, | 
|  | KEY_AES_GROUP         = 4, | 
|  | KEY_AES_PAIRWISE      = 5, | 
|  | KEY_WEP_GROUP         = 6, | 
|  | KEY_TKIP_MIC_GROUP    = 10, | 
|  | KEY_TKIP_MIC_PAIRWISE = 11, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * | 
|  | * key_type_e   key size    key format | 
|  | * ----------   ---------   ---------- | 
|  | * 0x00         5, 13, 29   Key data | 
|  | * 0x01         5, 13, 29   Key data | 
|  | * 0x04         16          16 bytes of key data | 
|  | * 0x05         16          16 bytes of key data | 
|  | * 0x0a         32          16 bytes of TKIP key data | 
|  | *                          8 bytes of RX MIC key data | 
|  | *                          8 bytes of TX MIC key data | 
|  | * 0x0b         32          16 bytes of TKIP key data | 
|  | *                          8 bytes of RX MIC key data | 
|  | *                          8 bytes of TX MIC key data | 
|  | * | 
|  | */ | 
|  |  | 
|  | struct wl1251_cmd_set_keys { | 
|  | struct wl1251_cmd_header header; | 
|  |  | 
|  | /* Ignored for default WEP key */ | 
|  | u8 addr[ETH_ALEN]; | 
|  |  | 
|  | /* key_action_e */ | 
|  | u16 key_action; | 
|  |  | 
|  | u16 reserved_1; | 
|  |  | 
|  | /* key size in bytes */ | 
|  | u8 key_size; | 
|  |  | 
|  | /* key_type_e */ | 
|  | u8 key_type; | 
|  | u8 ssid_profile; | 
|  |  | 
|  | /* | 
|  | * TKIP, AES: frame's key id field. | 
|  | * For WEP default key: key id; | 
|  | */ | 
|  | u8 id; | 
|  | u8 reserved_2[6]; | 
|  | u8 key[MAX_KEY_SIZE]; | 
|  | u16 ac_seq_num16[NUM_ACCESS_CATEGORIES_COPY]; | 
|  | u32 ac_seq_num32[NUM_ACCESS_CATEGORIES_COPY]; | 
|  | } __packed; | 
|  |  | 
|  |  | 
|  | #endif /* __WL1251_CMD_H__ */ |