| /* |
| * Definitions for the KLSI KL5KUSB105 serial port adapter |
| */ |
| |
| /* vendor/product pairs that are known to contain this chipset */ |
| #define PALMCONNECT_VID 0x0830 |
| #define PALMCONNECT_PID 0x0080 |
| |
| #define KLSI_VID 0x05e9 |
| #define KLSI_KL5KUSB105D_PID 0x00c0 |
| |
| /* Vendor commands: */ |
| |
| |
| /* port table -- the chip supports up to 4 channels */ |
| |
| /* baud rates */ |
| |
| enum { |
| kl5kusb105a_sio_b115200 = 0, |
| kl5kusb105a_sio_b57600 = 1, |
| kl5kusb105a_sio_b38400 = 2, |
| kl5kusb105a_sio_b19200 = 4, |
| kl5kusb105a_sio_b14400 = 5, |
| kl5kusb105a_sio_b9600 = 6, |
| kl5kusb105a_sio_b4800 = 8, /* unchecked */ |
| kl5kusb105a_sio_b2400 = 9, /* unchecked */ |
| kl5kusb105a_sio_b1200 = 0xa, /* unchecked */ |
| kl5kusb105a_sio_b600 = 0xb /* unchecked */ |
| }; |
| |
| /* data bits */ |
| #define kl5kusb105a_dtb_7 7 |
| #define kl5kusb105a_dtb_8 8 |
| |
| |
| |
| /* requests: */ |
| #define KL5KUSB105A_SIO_SET_DATA 1 |
| #define KL5KUSB105A_SIO_POLL 2 |
| #define KL5KUSB105A_SIO_CONFIGURE 3 |
| /* values used for request KL5KUSB105A_SIO_CONFIGURE */ |
| #define KL5KUSB105A_SIO_CONFIGURE_READ_ON 3 |
| #define KL5KUSB105A_SIO_CONFIGURE_READ_OFF 2 |
| |
| /* Interpretation of modem status lines */ |
| /* These need sorting out by individually connecting pins and checking |
| * results. FIXME! |
| * When data is being sent we see 0x30 in the lower byte; this must |
| * contain DSR and CTS ... |
| */ |
| #define KL5KUSB105A_DSR ((1<<4) | (1<<5)) |
| #define KL5KUSB105A_CTS ((1<<5) | (1<<4)) |
| |
| #define KL5KUSB105A_WANTS_TO_SEND 0x30 |
| #if 0 |
| #define KL5KUSB105A_DTR /* Data Terminal Ready */ |
| #define KL5KUSB105A_CTS /* Clear To Send */ |
| #define KL5KUSB105A_CD /* Carrier Detect */ |
| #define KL5KUSB105A_DSR /* Data Set Ready */ |
| #define KL5KUSB105A_RxD /* Receive pin */ |
| |
| #define KL5KUSB105A_LE |
| #define KL5KUSB105A_RTS |
| #define KL5KUSB105A_ST |
| #define KL5KUSB105A_SR |
| #define KL5KUSB105A_RI /* Ring Indicator */ |
| #endif |
