| /* |
| * linux/arch/arm/mach-omap2/prcm.c |
| * |
| * OMAP 24xx Power Reset and Clock Management (PRCM) functions |
| * |
| * Copyright (C) 2005 Nokia Corporation |
| * |
| * Written by Tony Lindgren <tony.lindgren@nokia.com> |
| * |
| * Copyright (C) 2007 Texas Instruments, Inc. |
| * Rajendra Nayak <rnayak@ti.com> |
| * |
| * Some pieces of code Copyright (C) 2005 Texas Instruments, Inc. |
| * Upgraded with OMAP4 support by Abhijit Pagare <abhijitpagare@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/delay.h> |
| #include <linux/i2c/twl.h> |
| |
| #include <plat/common.h> |
| #include <plat/prcm.h> |
| #include <plat/irqs.h> |
| |
| #include "clock.h" |
| #include "clock2xxx.h" |
| #include "cm2xxx_3xxx.h" |
| #include "prm2xxx_3xxx.h" |
| #include "prm44xx.h" |
| #include "prminst44xx.h" |
| #include "prm-regbits-24xx.h" |
| #include "prm-regbits-44xx.h" |
| #include "control.h" |
| |
| void __iomem *prm_base; |
| void __iomem *cm_base; |
| void __iomem *cm2_base; |
| |
| #define MAX_MODULE_ENABLE_WAIT 100000 |
| |
| u32 omap_prcm_get_reset_sources(void) |
| { |
| /* XXX This presumably needs modification for 34XX */ |
| if (cpu_is_omap24xx()) |
| return omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST) & 0x7f; |
| if (cpu_is_omap34xx()) |
| return omap2_prm_read_mod_reg(0xA00, OMAP2_RM_RSTST) & 0x7f; |
| if (cpu_is_omap44xx()) |
| return omap2_prm_read_mod_reg(WKUP_MOD, OMAP4_RM_RSTST) & 0x7f; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_prcm_get_reset_sources); |
| |
| /* Resets clock rates and reboots the system. Only called from system.h */ |
| void omap_prcm_arch_reset(char mode, const char *cmd) |
| { |
| s16 prcm_offs = 0; |
| |
| if (cpu_is_omap24xx()) { |
| omap2xxx_clk_prepare_for_reboot(); |
| |
| prcm_offs = WKUP_MOD; |
| } else if (cpu_is_omap34xx()) { |
| prcm_offs = OMAP3430_GR_MOD; |
| omap3_ctrl_write_boot_mode((cmd ? (u8)*cmd : 0)); |
| } else if (cpu_is_omap44xx()) { |
| omap4_prm_global_warm_sw_reset(); /* never returns */ |
| } else if (cpu_is_ti81xx()) { |
| omap2_prm_set_mod_reg_bits(TI81XX_GLOBAL_RST_COLD, prcm_offs, |
| TI81XX_PRM_DEVICE_RSTCTRL); |
| } else { |
| WARN_ON(1); |
| } |
| |
| /* Ensure the sleep script doesn't run */ |
| twl4030_remove_script(TWL4030_SLEEP_SCRIPT); |
| |
| omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs, OMAP2_RM_RSTCTRL); |
| |
| omap2_prm_read_mod_reg(prcm_offs, OMAP2_RM_RSTCTRL); /* OCP barrier */ |
| } |
| |
| /** |
| * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness |
| * @reg: physical address of module IDLEST register |
| * @mask: value to mask against to determine if the module is active |
| * @idlest: idle state indicator (0 or 1) for the clock |
| * @name: name of the clock (for printk) |
| * |
| * Returns 1 if the module indicated readiness in time, or 0 if it |
| * failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds. |
| * |
| * XXX This function is deprecated. It should be removed once the |
| * hwmod conversion is complete. |
| */ |
| int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest, |
| const char *name) |
| { |
| int i = 0; |
| int ena = 0; |
| |
| if (idlest) |
| ena = 0; |
| else |
| ena = mask; |
| |
| /* Wait for lock */ |
| omap_test_timeout(((__raw_readl(reg) & mask) == ena), |
| MAX_MODULE_ENABLE_WAIT, i); |
| |
| if (i < MAX_MODULE_ENABLE_WAIT) |
| pr_debug("cm: Module associated with clock %s ready after %d " |
| "loops\n", name, i); |
| else |
| pr_err("cm: Module associated with clock %s didn't enable in " |
| "%d tries\n", name, MAX_MODULE_ENABLE_WAIT); |
| |
| return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0; |
| }; |
| |
| void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals) |
| { |
| /* Static mapping, never released */ |
| if (omap2_globals->prm) { |
| prm_base = ioremap(omap2_globals->prm, SZ_8K); |
| WARN_ON(!prm_base); |
| } |
| if (omap2_globals->cm) { |
| cm_base = ioremap(omap2_globals->cm, SZ_8K); |
| WARN_ON(!cm_base); |
| } |
| if (omap2_globals->cm2) { |
| cm2_base = ioremap(omap2_globals->cm2, SZ_8K); |
| WARN_ON(!cm2_base); |
| } |
| } |