|  | /* | 
|  | * | 
|  | *  BlueZ - Bluetooth protocol stack for Linux | 
|  | * | 
|  | *  Copyright (C) 2010  Nokia Corporation | 
|  | *  Copyright (C) 2010  Marcel Holtmann <marcel@holtmann.org> | 
|  | * | 
|  | * | 
|  | *  This program is free software; you can redistribute it and/or modify | 
|  | *  it under the terms of the GNU General Public License as published by | 
|  | *  the Free Software Foundation; either version 2 of the License, or | 
|  | *  (at your option) any later version. | 
|  | * | 
|  | *  This program is distributed in the hope that it will be useful, | 
|  | *  but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | *  GNU General Public License for more details. | 
|  | * | 
|  | *  You should have received a copy of the GNU General Public License | 
|  | *  along with this program; if not, write to the Free Software | 
|  | *  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA | 
|  | * | 
|  | */ | 
|  |  | 
|  | #ifdef HAVE_CONFIG_H | 
|  | #include <config.h> | 
|  | #endif | 
|  |  | 
|  | #include <errno.h> | 
|  | #include <stdlib.h> | 
|  | #include <unistd.h> | 
|  |  | 
|  | #include <glib.h> | 
|  |  | 
|  | #include "lib/bluetooth.h" | 
|  | #include "lib/hci.h" | 
|  | #include "lib/hci_lib.h" | 
|  | #include "lib/sdp.h" | 
|  | #include "lib/uuid.h" | 
|  |  | 
|  | #include "src/shared/util.h" | 
|  | #include "att.h" | 
|  | #include "btio/btio.h" | 
|  | #include "gattrib.h" | 
|  | #include "gatt.h" | 
|  | #include "gatttool.h" | 
|  |  | 
|  | static char *opt_src = NULL; | 
|  | static char *opt_dst = NULL; | 
|  | static char *opt_dst_type = NULL; | 
|  | static char *opt_value = NULL; | 
|  | static char *opt_sec_level = NULL; | 
|  | static bt_uuid_t *opt_uuid = NULL; | 
|  | static int opt_start = 0x0001; | 
|  | static int opt_end = 0xffff; | 
|  | static int opt_handle = -1; | 
|  | static int opt_mtu = 0; | 
|  | static int opt_psm = 0; | 
|  | static gboolean opt_primary = FALSE; | 
|  | static gboolean opt_characteristics = FALSE; | 
|  | static gboolean opt_char_read = FALSE; | 
|  | static gboolean opt_listen = FALSE; | 
|  | static gboolean opt_char_desc = FALSE; | 
|  | static gboolean opt_char_write = FALSE; | 
|  | static gboolean opt_char_write_req = FALSE; | 
|  | static gboolean opt_interactive = FALSE; | 
|  | static GMainLoop *event_loop; | 
|  | static gboolean got_error = FALSE; | 
|  | static GSourceFunc operation; | 
|  |  | 
|  | struct characteristic_data { | 
|  | GAttrib *attrib; | 
|  | uint16_t start; | 
|  | uint16_t end; | 
|  | }; | 
|  |  | 
|  | static void events_handler(const uint8_t *pdu, uint16_t len, gpointer user_data) | 
|  | { | 
|  | GAttrib *attrib = user_data; | 
|  | uint8_t *opdu; | 
|  | uint16_t handle, i, olen = 0; | 
|  | size_t plen; | 
|  |  | 
|  | handle = get_le16(&pdu[1]); | 
|  |  | 
|  | switch (pdu[0]) { | 
|  | case ATT_OP_HANDLE_NOTIFY: | 
|  | g_print("Notification handle = 0x%04x value: ", handle); | 
|  | break; | 
|  | case ATT_OP_HANDLE_IND: | 
|  | g_print("Indication   handle = 0x%04x value: ", handle); | 
|  | break; | 
|  | default: | 
|  | g_print("Invalid opcode\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | for (i = 3; i < len; i++) | 
|  | g_print("%02x ", pdu[i]); | 
|  |  | 
|  | g_print("\n"); | 
|  |  | 
|  | if (pdu[0] == ATT_OP_HANDLE_NOTIFY) | 
|  | return; | 
|  |  | 
|  | opdu = g_attrib_get_buffer(attrib, &plen); | 
|  | olen = enc_confirmation(opdu, plen); | 
|  |  | 
|  | if (olen > 0) | 
|  | g_attrib_send(attrib, 0, opdu, olen, NULL, NULL, NULL); | 
|  | } | 
|  |  | 
|  | static gboolean listen_start(gpointer user_data) | 
|  | { | 
|  | GAttrib *attrib = user_data; | 
|  |  | 
|  | g_attrib_register(attrib, ATT_OP_HANDLE_NOTIFY, GATTRIB_ALL_HANDLES, | 
|  | events_handler, attrib, NULL); | 
|  | g_attrib_register(attrib, ATT_OP_HANDLE_IND, GATTRIB_ALL_HANDLES, | 
|  | events_handler, attrib, NULL); | 
|  |  | 
|  | return FALSE; | 
|  | } | 
|  |  | 
|  | static void connect_cb(GIOChannel *io, GError *err, gpointer user_data) | 
|  | { | 
|  | GAttrib *attrib; | 
|  | uint16_t mtu; | 
|  | uint16_t cid; | 
|  | GError *gerr = NULL; | 
|  |  | 
|  | if (err) { | 
|  | g_printerr("%s\n", err->message); | 
|  | got_error = TRUE; | 
|  | g_main_loop_quit(event_loop); | 
|  | } | 
|  |  | 
|  | bt_io_get(io, &gerr, BT_IO_OPT_IMTU, &mtu, | 
|  | BT_IO_OPT_CID, &cid, BT_IO_OPT_INVALID); | 
|  |  | 
|  | if (gerr) { | 
|  | g_printerr("Can't detect MTU, using default: %s", | 
|  | gerr->message); | 
|  | g_error_free(gerr); | 
|  | mtu = ATT_DEFAULT_LE_MTU; | 
|  | } | 
|  |  | 
|  | if (cid == ATT_CID) | 
|  | mtu = ATT_DEFAULT_LE_MTU; | 
|  |  | 
|  | attrib = g_attrib_new(io, mtu, false); | 
|  |  | 
|  | if (opt_listen) | 
|  | g_idle_add(listen_start, attrib); | 
|  |  | 
|  | operation(attrib); | 
|  | } | 
|  |  | 
|  | static void primary_all_cb(uint8_t status, GSList *services, void *user_data) | 
|  | { | 
|  | GSList *l; | 
|  |  | 
|  | if (status) { | 
|  | g_printerr("Discover all primary services failed: %s\n", | 
|  | att_ecode2str(status)); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | for (l = services; l; l = l->next) { | 
|  | struct gatt_primary *prim = l->data; | 
|  | g_print("attr handle = 0x%04x, end grp handle = 0x%04x " | 
|  | "uuid: %s\n", prim->range.start, prim->range.end, prim->uuid); | 
|  | } | 
|  |  | 
|  | done: | 
|  | g_main_loop_quit(event_loop); | 
|  | } | 
|  |  | 
|  | static void primary_by_uuid_cb(uint8_t status, GSList *ranges, void *user_data) | 
|  | { | 
|  | GSList *l; | 
|  |  | 
|  | if (status != 0) { | 
|  | g_printerr("Discover primary services by UUID failed: %s\n", | 
|  | att_ecode2str(status)); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | for (l = ranges; l; l = l->next) { | 
|  | struct att_range *range = l->data; | 
|  | g_print("Starting handle: %04x Ending handle: %04x\n", | 
|  | range->start, range->end); | 
|  | } | 
|  |  | 
|  | done: | 
|  | g_main_loop_quit(event_loop); | 
|  | } | 
|  |  | 
|  | static gboolean primary(gpointer user_data) | 
|  | { | 
|  | GAttrib *attrib = user_data; | 
|  |  | 
|  | if (opt_uuid) | 
|  | gatt_discover_primary(attrib, opt_uuid, primary_by_uuid_cb, | 
|  | NULL); | 
|  | else | 
|  | gatt_discover_primary(attrib, NULL, primary_all_cb, NULL); | 
|  |  | 
|  | return FALSE; | 
|  | } | 
|  |  | 
|  | static void char_discovered_cb(uint8_t status, GSList *characteristics, | 
|  | void *user_data) | 
|  | { | 
|  | GSList *l; | 
|  |  | 
|  | if (status) { | 
|  | g_printerr("Discover all characteristics failed: %s\n", | 
|  | att_ecode2str(status)); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | for (l = characteristics; l; l = l->next) { | 
|  | struct gatt_char *chars = l->data; | 
|  |  | 
|  | g_print("handle = 0x%04x, char properties = 0x%02x, char value " | 
|  | "handle = 0x%04x, uuid = %s\n", chars->handle, | 
|  | chars->properties, chars->value_handle, chars->uuid); | 
|  | } | 
|  |  | 
|  | done: | 
|  | g_main_loop_quit(event_loop); | 
|  | } | 
|  |  | 
|  | static gboolean characteristics(gpointer user_data) | 
|  | { | 
|  | GAttrib *attrib = user_data; | 
|  |  | 
|  | gatt_discover_char(attrib, opt_start, opt_end, opt_uuid, | 
|  | char_discovered_cb, NULL); | 
|  |  | 
|  | return FALSE; | 
|  | } | 
|  |  | 
|  | static void char_read_cb(guint8 status, const guint8 *pdu, guint16 plen, | 
|  | gpointer user_data) | 
|  | { | 
|  | uint8_t value[plen]; | 
|  | ssize_t vlen; | 
|  | int i; | 
|  |  | 
|  | if (status != 0) { | 
|  | g_printerr("Characteristic value/descriptor read failed: %s\n", | 
|  | att_ecode2str(status)); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | vlen = dec_read_resp(pdu, plen, value, sizeof(value)); | 
|  | if (vlen < 0) { | 
|  | g_printerr("Protocol error\n"); | 
|  | goto done; | 
|  | } | 
|  | g_print("Characteristic value/descriptor: "); | 
|  | for (i = 0; i < vlen; i++) | 
|  | g_print("%02x ", value[i]); | 
|  | g_print("\n"); | 
|  |  | 
|  | done: | 
|  | if (!opt_listen) | 
|  | g_main_loop_quit(event_loop); | 
|  | } | 
|  |  | 
|  | static void char_read_by_uuid_cb(guint8 status, const guint8 *pdu, | 
|  | guint16 plen, gpointer user_data) | 
|  | { | 
|  | struct att_data_list *list; | 
|  | int i; | 
|  |  | 
|  | if (status != 0) { | 
|  | g_printerr("Read characteristics by UUID failed: %s\n", | 
|  | att_ecode2str(status)); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | list = dec_read_by_type_resp(pdu, plen); | 
|  | if (list == NULL) | 
|  | goto done; | 
|  |  | 
|  | for (i = 0; i < list->num; i++) { | 
|  | uint8_t *value = list->data[i]; | 
|  | int j; | 
|  |  | 
|  | g_print("handle: 0x%04x \t value: ", get_le16(value)); | 
|  | value += 2; | 
|  | for (j = 0; j < list->len - 2; j++, value++) | 
|  | g_print("%02x ", *value); | 
|  | g_print("\n"); | 
|  | } | 
|  |  | 
|  | att_data_list_free(list); | 
|  |  | 
|  | done: | 
|  | g_main_loop_quit(event_loop); | 
|  | } | 
|  |  | 
|  | static gboolean characteristics_read(gpointer user_data) | 
|  | { | 
|  | GAttrib *attrib = user_data; | 
|  |  | 
|  | if (opt_uuid != NULL) { | 
|  |  | 
|  | gatt_read_char_by_uuid(attrib, opt_start, opt_end, opt_uuid, | 
|  | char_read_by_uuid_cb, NULL); | 
|  |  | 
|  | return FALSE; | 
|  | } | 
|  |  | 
|  | if (opt_handle <= 0) { | 
|  | g_printerr("A valid handle is required\n"); | 
|  | g_main_loop_quit(event_loop); | 
|  | return FALSE; | 
|  | } | 
|  |  | 
|  | gatt_read_char(attrib, opt_handle, char_read_cb, attrib); | 
|  |  | 
|  | return FALSE; | 
|  | } | 
|  |  | 
|  | static void mainloop_quit(gpointer user_data) | 
|  | { | 
|  | uint8_t *value = user_data; | 
|  |  | 
|  | g_free(value); | 
|  | g_main_loop_quit(event_loop); | 
|  | } | 
|  |  | 
|  | static gboolean characteristics_write(gpointer user_data) | 
|  | { | 
|  | GAttrib *attrib = user_data; | 
|  | uint8_t *value; | 
|  | size_t len; | 
|  |  | 
|  | if (opt_handle <= 0) { | 
|  | g_printerr("A valid handle is required\n"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | if (opt_value == NULL || opt_value[0] == '\0') { | 
|  | g_printerr("A value is required\n"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | len = gatt_attr_data_from_string(opt_value, &value); | 
|  | if (len == 0) { | 
|  | g_printerr("Invalid value\n"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | gatt_write_cmd(attrib, opt_handle, value, len, mainloop_quit, value); | 
|  |  | 
|  | g_free(value); | 
|  | return FALSE; | 
|  |  | 
|  | error: | 
|  | g_main_loop_quit(event_loop); | 
|  | return FALSE; | 
|  | } | 
|  |  | 
|  | static void char_write_req_cb(guint8 status, const guint8 *pdu, guint16 plen, | 
|  | gpointer user_data) | 
|  | { | 
|  | if (status != 0) { | 
|  | g_printerr("Characteristic Write Request failed: " | 
|  | "%s\n", att_ecode2str(status)); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (!dec_write_resp(pdu, plen) && !dec_exec_write_resp(pdu, plen)) { | 
|  | g_printerr("Protocol error\n"); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | g_print("Characteristic value was written successfully\n"); | 
|  |  | 
|  | done: | 
|  | if (!opt_listen) | 
|  | g_main_loop_quit(event_loop); | 
|  | } | 
|  |  | 
|  | static gboolean characteristics_write_req(gpointer user_data) | 
|  | { | 
|  | GAttrib *attrib = user_data; | 
|  | uint8_t *value; | 
|  | size_t len; | 
|  |  | 
|  | if (opt_handle <= 0) { | 
|  | g_printerr("A valid handle is required\n"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | if (opt_value == NULL || opt_value[0] == '\0') { | 
|  | g_printerr("A value is required\n"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | len = gatt_attr_data_from_string(opt_value, &value); | 
|  | if (len == 0) { | 
|  | g_printerr("Invalid value\n"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | gatt_write_char(attrib, opt_handle, value, len, char_write_req_cb, | 
|  | NULL); | 
|  |  | 
|  | g_free(value); | 
|  | return FALSE; | 
|  |  | 
|  | error: | 
|  | g_main_loop_quit(event_loop); | 
|  | return FALSE; | 
|  | } | 
|  |  | 
|  | static void char_desc_cb(uint8_t status, GSList *descriptors, void *user_data) | 
|  | { | 
|  | GSList *l; | 
|  |  | 
|  | if (status) { | 
|  | g_printerr("Discover descriptors failed: %s\n", | 
|  | att_ecode2str(status)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | for (l = descriptors; l; l = l->next) { | 
|  | struct gatt_desc *desc = l->data; | 
|  |  | 
|  | g_print("handle = 0x%04x, uuid = %s\n", desc->handle, | 
|  | desc->uuid); | 
|  | } | 
|  |  | 
|  | if (!opt_listen) | 
|  | g_main_loop_quit(event_loop); | 
|  | } | 
|  |  | 
|  | static gboolean characteristics_desc(gpointer user_data) | 
|  | { | 
|  | GAttrib *attrib = user_data; | 
|  |  | 
|  | gatt_discover_desc(attrib, opt_start, opt_end, NULL, char_desc_cb, | 
|  | NULL); | 
|  |  | 
|  | return FALSE; | 
|  | } | 
|  |  | 
|  | static gboolean parse_uuid(const char *key, const char *value, | 
|  | gpointer user_data, GError **error) | 
|  | { | 
|  | if (!value) | 
|  | return FALSE; | 
|  |  | 
|  | opt_uuid = g_try_malloc(sizeof(bt_uuid_t)); | 
|  | if (opt_uuid == NULL) | 
|  | return FALSE; | 
|  |  | 
|  | if (bt_string_to_uuid(opt_uuid, value) < 0) | 
|  | return FALSE; | 
|  |  | 
|  | return TRUE; | 
|  | } | 
|  |  | 
|  | static GOptionEntry primary_char_options[] = { | 
|  | { "start", 's' , 0, G_OPTION_ARG_INT, &opt_start, | 
|  | "Starting handle(optional)", "0x0001" }, | 
|  | { "end", 'e' , 0, G_OPTION_ARG_INT, &opt_end, | 
|  | "Ending handle(optional)", "0xffff" }, | 
|  | { "uuid", 'u', G_OPTION_FLAG_OPTIONAL_ARG, G_OPTION_ARG_CALLBACK, | 
|  | parse_uuid, "UUID16 or UUID128(optional)", "0x1801"}, | 
|  | { NULL }, | 
|  | }; | 
|  |  | 
|  | static GOptionEntry char_rw_options[] = { | 
|  | { "handle", 'a' , 0, G_OPTION_ARG_INT, &opt_handle, | 
|  | "Read/Write characteristic by handle(required)", "0x0001" }, | 
|  | { "value", 'n' , 0, G_OPTION_ARG_STRING, &opt_value, | 
|  | "Write characteristic value (required for write operation)", | 
|  | "0x0001" }, | 
|  | {NULL}, | 
|  | }; | 
|  |  | 
|  | static GOptionEntry gatt_options[] = { | 
|  | { "primary", 0, 0, G_OPTION_ARG_NONE, &opt_primary, | 
|  | "Primary Service Discovery", NULL }, | 
|  | { "characteristics", 0, 0, G_OPTION_ARG_NONE, &opt_characteristics, | 
|  | "Characteristics Discovery", NULL }, | 
|  | { "char-read", 0, 0, G_OPTION_ARG_NONE, &opt_char_read, | 
|  | "Characteristics Value/Descriptor Read", NULL }, | 
|  | { "char-write", 0, 0, G_OPTION_ARG_NONE, &opt_char_write, | 
|  | "Characteristics Value Write Without Response (Write Command)", | 
|  | NULL }, | 
|  | { "char-write-req", 0, 0, G_OPTION_ARG_NONE, &opt_char_write_req, | 
|  | "Characteristics Value Write (Write Request)", NULL }, | 
|  | { "char-desc", 0, 0, G_OPTION_ARG_NONE, &opt_char_desc, | 
|  | "Characteristics Descriptor Discovery", NULL }, | 
|  | { "listen", 0, 0, G_OPTION_ARG_NONE, &opt_listen, | 
|  | "Listen for notifications and indications", NULL }, | 
|  | { "interactive", 'I', G_OPTION_FLAG_IN_MAIN, G_OPTION_ARG_NONE, | 
|  | &opt_interactive, "Use interactive mode", NULL }, | 
|  | { NULL }, | 
|  | }; | 
|  |  | 
|  | static GOptionEntry options[] = { | 
|  | { "adapter", 'i', 0, G_OPTION_ARG_STRING, &opt_src, | 
|  | "Specify local adapter interface", "hciX" }, | 
|  | { "device", 'b', 0, G_OPTION_ARG_STRING, &opt_dst, | 
|  | "Specify remote Bluetooth address", "MAC" }, | 
|  | { "addr-type", 't', 0, G_OPTION_ARG_STRING, &opt_dst_type, | 
|  | "Set LE address type. Default: public", "[public | random]"}, | 
|  | { "mtu", 'm', 0, G_OPTION_ARG_INT, &opt_mtu, | 
|  | "Specify the MTU size", "MTU" }, | 
|  | { "psm", 'p', 0, G_OPTION_ARG_INT, &opt_psm, | 
|  | "Specify the PSM for GATT/ATT over BR/EDR", "PSM" }, | 
|  | { "sec-level", 'l', 0, G_OPTION_ARG_STRING, &opt_sec_level, | 
|  | "Set security level. Default: low", "[low | medium | high]"}, | 
|  | { NULL }, | 
|  | }; | 
|  |  | 
|  | int main(int argc, char *argv[]) | 
|  | { | 
|  | GOptionContext *context; | 
|  | GOptionGroup *gatt_group, *params_group, *char_rw_group; | 
|  | GError *gerr = NULL; | 
|  | GIOChannel *chan; | 
|  |  | 
|  | opt_dst_type = g_strdup("public"); | 
|  | opt_sec_level = g_strdup("low"); | 
|  |  | 
|  | context = g_option_context_new(NULL); | 
|  | g_option_context_add_main_entries(context, options, NULL); | 
|  |  | 
|  | /* GATT commands */ | 
|  | gatt_group = g_option_group_new("gatt", "GATT commands", | 
|  | "Show all GATT commands", NULL, NULL); | 
|  | g_option_context_add_group(context, gatt_group); | 
|  | g_option_group_add_entries(gatt_group, gatt_options); | 
|  |  | 
|  | /* Primary Services and Characteristics arguments */ | 
|  | params_group = g_option_group_new("params", | 
|  | "Primary Services/Characteristics arguments", | 
|  | "Show all Primary Services/Characteristics arguments", | 
|  | NULL, NULL); | 
|  | g_option_context_add_group(context, params_group); | 
|  | g_option_group_add_entries(params_group, primary_char_options); | 
|  |  | 
|  | /* Characteristics value/descriptor read/write arguments */ | 
|  | char_rw_group = g_option_group_new("char-read-write", | 
|  | "Characteristics Value/Descriptor Read/Write arguments", | 
|  | "Show all Characteristics Value/Descriptor Read/Write " | 
|  | "arguments", | 
|  | NULL, NULL); | 
|  | g_option_context_add_group(context, char_rw_group); | 
|  | g_option_group_add_entries(char_rw_group, char_rw_options); | 
|  |  | 
|  | if (!g_option_context_parse(context, &argc, &argv, &gerr)) { | 
|  | g_printerr("%s\n", gerr->message); | 
|  | g_clear_error(&gerr); | 
|  | } | 
|  |  | 
|  | if (opt_interactive) { | 
|  | interactive(opt_src, opt_dst, opt_dst_type, opt_psm); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (opt_primary) | 
|  | operation = primary; | 
|  | else if (opt_characteristics) | 
|  | operation = characteristics; | 
|  | else if (opt_char_read) | 
|  | operation = characteristics_read; | 
|  | else if (opt_char_write) | 
|  | operation = characteristics_write; | 
|  | else if (opt_char_write_req) | 
|  | operation = characteristics_write_req; | 
|  | else if (opt_char_desc) | 
|  | operation = characteristics_desc; | 
|  | else { | 
|  | char *help = g_option_context_get_help(context, TRUE, NULL); | 
|  | g_print("%s\n", help); | 
|  | g_free(help); | 
|  | got_error = TRUE; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (opt_dst == NULL) { | 
|  | g_print("Remote Bluetooth address required\n"); | 
|  | got_error = TRUE; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | chan = gatt_connect(opt_src, opt_dst, opt_dst_type, opt_sec_level, | 
|  | opt_psm, opt_mtu, connect_cb, &gerr); | 
|  | if (chan == NULL) { | 
|  | g_printerr("%s\n", gerr->message); | 
|  | g_clear_error(&gerr); | 
|  | got_error = TRUE; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | event_loop = g_main_loop_new(NULL, FALSE); | 
|  |  | 
|  | g_main_loop_run(event_loop); | 
|  |  | 
|  | g_main_loop_unref(event_loop); | 
|  |  | 
|  | done: | 
|  | g_option_context_free(context); | 
|  | g_free(opt_src); | 
|  | g_free(opt_dst); | 
|  | g_free(opt_uuid); | 
|  | g_free(opt_sec_level); | 
|  |  | 
|  | if (got_error) | 
|  | exit(EXIT_FAILURE); | 
|  | else | 
|  | exit(EXIT_SUCCESS); | 
|  | } |