| /dts-v1/; |
| |
| #include "tegra30-cardhu.dtsi" |
| |
| /* This dts file support the cardhu A02 version of board */ |
| |
| / { |
| model = "NVIDIA Tegra30 Cardhu A02 evaluation board"; |
| compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30"; |
| |
| sdhci@78000400 { |
| status = "okay"; |
| power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>; |
| bus-width = <4>; |
| keep-power-in-suspend; |
| }; |
| |
| regulators { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ddr_reg: regulator@100 { |
| compatible = "regulator-fixed"; |
| reg = <100>; |
| regulator-name = "vdd_ddr"; |
| regulator-min-microvolt = <1500000>; |
| regulator-max-microvolt = <1500000>; |
| regulator-always-on; |
| regulator-boot-on; |
| enable-active-high; |
| gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| sys_3v3_reg: regulator@101 { |
| compatible = "regulator-fixed"; |
| reg = <101>; |
| regulator-name = "sys_3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| regulator-boot-on; |
| enable-active-high; |
| gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| usb1_vbus_reg: regulator@102 { |
| compatible = "regulator-fixed"; |
| reg = <102>; |
| regulator-name = "usb1_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| enable-active-high; |
| gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>; |
| gpio-open-drain; |
| vin-supply = <&vdd_5v0_reg>; |
| }; |
| |
| usb3_vbus_reg: regulator@103 { |
| compatible = "regulator-fixed"; |
| reg = <103>; |
| regulator-name = "usb3_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| enable-active-high; |
| gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>; |
| gpio-open-drain; |
| vin-supply = <&vdd_5v0_reg>; |
| }; |
| |
| vdd_5v0_reg: regulator@104 { |
| compatible = "regulator-fixed"; |
| reg = <104>; |
| regulator-name = "5v0"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| enable-active-high; |
| gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| vdd_bl_reg: regulator@105 { |
| compatible = "regulator-fixed"; |
| reg = <105>; |
| regulator-name = "vdd_bl"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| regulator-boot-on; |
| enable-active-high; |
| gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| }; |
| |
