blob: 8bbe09c931322cf4311383ab6f2fe169f746f8a1 [file] [log] [blame] [edit]
/*
* Copyright (C) 2003-2006, Axis Communications AB.
*/
#include <linux/ptrace.h>
#include <linux/module.h>
#include <asm/uaccess.h>
#include <hwregs/supp_reg.h>
#include <hwregs/intr_vect_defs.h>
#include <asm/irq.h>
void show_registers(struct pt_regs *regs)
{
/*
* It's possible to use either the USP register or current->thread.usp.
* USP might not correspond to the current process for all cases this
* function is called, and current->thread.usp isn't up to date for the
* current process. Experience shows that using USP is the way to go.
*/
unsigned long usp = rdusp();
unsigned long d_mmu_cause;
unsigned long i_mmu_cause;
printk("CPU: %d\n", smp_processor_id());
printk("ERP: %08lx SRP: %08lx CCS: %08lx USP: %08lx MOF: %08lx\n",
regs->erp, regs->srp, regs->ccs, usp, regs->mof);
printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n",
regs->r0, regs->r1, regs->r2, regs->r3);
printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n",
regs->r4, regs->r5, regs->r6, regs->r7);
printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n",
regs->r8, regs->r9, regs->r10, regs->r11);
printk("r12: %08lx r13: %08lx oR10: %08lx acr: %08lx\n",
regs->r12, regs->r13, regs->orig_r10, regs->acr);
printk(" sp: %08lx\n", (unsigned long)regs);
SUPP_BANK_SEL(BANK_IM);
SUPP_REG_RD(RW_MM_CAUSE, i_mmu_cause);
SUPP_BANK_SEL(BANK_DM);
SUPP_REG_RD(RW_MM_CAUSE, d_mmu_cause);
printk(" Data MMU Cause: %08lx\n", d_mmu_cause);
printk("Instruction MMU Cause: %08lx\n", i_mmu_cause);
printk("Process %s (pid: %d, stackpage=%08lx)\n",
current->comm, current->pid, (unsigned long)current);
/*
* When in-kernel, we also print out the stack and code at the
* time of the fault..
*/
if (!user_mode(regs)) {
int i;
show_stack(NULL, (unsigned long *)usp);
/*
* If the previous stack-dump wasn't a kernel one, dump the
* kernel stack now.
*/
if (usp != 0)
show_stack(NULL, NULL);
printk("\nCode: ");
if (regs->erp < PAGE_OFFSET)
goto bad_value;
/*
* Quite often the value at regs->erp doesn't point to the
* interesting instruction, which often is the previous
* instruction. So dump at an offset large enough that the
* instruction decoding should be in sync at the interesting
* point, but small enough to fit on a row. The regs->erp
* location is pointed out in a ksymoops-friendly way by
* wrapping the byte for that address in parenthesises.
*/
for (i = -12; i < 12; i++) {
unsigned char c;
if (__get_user(c, &((unsigned char *)regs->erp)[i])) {
bad_value:
printk(" Bad IP value.");
break;
}
if (i == 0)
printk("(%02x) ", c);
else
printk("%02x ", c);
}
printk("\n");
}
}
void arch_enable_nmi(void)
{
unsigned long flags;
local_save_flags(flags);
flags |= (1 << 30); /* NMI M flag is at bit 30 */
local_irq_restore(flags);
}
extern void (*nmi_handler)(struct pt_regs *);
void handle_nmi(struct pt_regs *regs)
{
#ifdef CONFIG_ETRAXFS
reg_intr_vect_r_nmi r;
#endif
if (nmi_handler)
nmi_handler(regs);
#ifdef CONFIG_ETRAXFS
/* Wait until nmi is no longer active. */
do {
r = REG_RD(intr_vect, regi_irq, r_nmi);
} while (r.ext == regk_intr_vect_on);
#endif
}
#ifdef CONFIG_BUG
extern void die_if_kernel(const char *str, struct pt_regs *regs, long err);
/* Copy of the regs at BUG() time. */
struct pt_regs BUG_regs;
void do_BUG(char *file, unsigned int line)
{
printk("kernel BUG at %s:%d!\n", file, line);
die_if_kernel("Oops", &BUG_regs, 0);
}
EXPORT_SYMBOL(do_BUG);
void fixup_BUG(struct pt_regs *regs)
{
BUG_regs = *regs;
#ifdef CONFIG_DEBUG_BUGVERBOSE
/*
* Fixup the BUG arguments through exception handlers.
*/
{
const struct exception_table_entry *fixup;
/*
* ERP points at the "break 14" + 2, compensate for the 2
* bytes.
*/
fixup = search_exception_tables(instruction_pointer(regs) - 2);
if (fixup) {
/* Adjust the instruction pointer in the stackframe. */
instruction_pointer(regs) = fixup->fixup;
arch_fixup(regs);
}
}
#else
/* Dont try to lookup the filename + line, just dump regs. */
do_BUG("unknown", 0);
#endif
}
/*
* Break 14 handler. Save regs and jump into the fixup_BUG.
*/
__asm__ ( ".text\n\t"
".global breakh_BUG\n\t"
"breakh_BUG:\n\t"
SAVE_ALL
KGDB_FIXUP
"move.d $sp, $r10\n\t"
"jsr fixup_BUG\n\t"
"nop\n\t"
"jump ret_from_intr\n\t"
"nop\n\t");
#ifdef CONFIG_DEBUG_BUGVERBOSE
void
handle_BUG(struct pt_regs *regs)
{
}
#endif
#endif