| # Copyright 2007 Simtec Electronics | |
| # | |
| # Licensed under GPLv2 | |
| config CPU_S3C2440 | |
| bool | |
| select CPU_ARM920T | |
| select S3C_GPIO_PULL_UP | |
| select S3C2410_CLOCK | |
| select S3C2410_PM if PM | |
| select S3C2410_GPIO | |
| select S3C2440_DMA if S3C2410_DMA | |
| select CPU_S3C244X | |
| select CPU_LLSERIAL_S3C2440 | |
| help | |
| Support for S3C2440 Samsung Mobile CPU based systems. | |
| config CPU_S3C2442 | |
| bool | |
| select CPU_ARM920T | |
| select S3C_GPIO_PULL_DOWN | |
| select S3C2410_CLOCK | |
| select S3C2410_GPIO | |
| select S3C2410_PM if PM | |
| select CPU_S3C244X | |
| select CPU_LLSERIAL_S3C2440 | |
| help | |
| Support for S3C2442 Samsung Mobile CPU based systems. | |
| config CPU_S3C244X | |
| bool | |
| depends on CPU_S3C2440 || CPU_S3C2442 | |
| help | |
| Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems. | |
| config S3C2440_CPUFREQ | |
| bool "S3C2440/S3C2442 CPU Frequency scaling support" | |
| depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442) | |
| select S3C2410_CPUFREQ_UTILS | |
| default y | |
| help | |
| CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. | |
| config S3C2440_XTAL_12000000 | |
| bool | |
| help | |
| Indicate that the build needs to support 12MHz system | |
| crystal. | |
| config S3C2440_XTAL_16934400 | |
| bool | |
| help | |
| Indicate that the build needs to support 16.9344MHz system | |
| crystal. | |
| config S3C2440_PLL_12000000 | |
| bool | |
| depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000 | |
| default y if CPU_FREQ_S3C24XX_PLL | |
| help | |
| PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals. | |
| config S3C2440_PLL_16934400 | |
| bool | |
| depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400 | |
| default y if CPU_FREQ_S3C24XX_PLL | |
| help | |
| PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals. | |
| config S3C2440_DMA | |
| bool | |
| depends on CPU_S3C2440 | |
| help | |
| Support for S3C2440 specific DMA code5A | |
| menu "S3C2440 and S3C2442 Machines" | |
| config MACH_ANUBIS | |
| bool "Simtec Electronics ANUBIS" | |
| select CPU_S3C2440 | |
| select S3C24XX_DCLK | |
| select PM_SIMTEC if PM | |
| select HAVE_PATA_PLATFORM | |
| select S3C24XX_GPIO_EXTRA64 | |
| select S3C2440_XTAL_12000000 | |
| select S3C_DEV_USB_HOST | |
| help | |
| Say Y here if you are using the Simtec Electronics ANUBIS | |
| development system | |
| config MACH_NEO1973_GTA02 | |
| bool "Openmoko GTA02 / Freerunner phone" | |
| select CPU_S3C2442 | |
| select MFD_PCF50633 | |
| select PCF50633_GPIO | |
| select I2C | |
| select POWER_SUPPLY | |
| select MACH_NEO1973 | |
| select S3C2410_PWM | |
| help | |
| Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone | |
| config MACH_OSIRIS | |
| bool "Simtec IM2440D20 (OSIRIS) module" | |
| select CPU_S3C2440 | |
| select S3C24XX_DCLK | |
| select PM_SIMTEC if PM | |
| select S3C24XX_GPIO_EXTRA128 | |
| select S3C2440_XTAL_12000000 | |
| select S3C2410_IOTIMING if S3C2440_CPUFREQ | |
| select S3C_DEV_USB_HOST | |
| select S3C_DEV_NAND | |
| help | |
| Say Y here if you are using the Simtec IM2440D20 module, also | |
| known as the Osiris. | |
| config MACH_OSIRIS_DVS | |
| tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver" | |
| depends on MACH_OSIRIS | |
| select TPS65010 | |
| help | |
| Say Y/M here if you want to have dynamic voltage scaling support | |
| on the Simtec IM2440D20 (OSIRIS) module via the TPS65011. | |
| The DVS driver alters the voltage supplied to the ARM core | |
| depending on the frequency it is running at. The driver itself | |
| does not do any of the frequency alteration, which is left up | |
| to the cpufreq driver. | |
| config MACH_RX3715 | |
| bool "HP iPAQ rx3715" | |
| select CPU_S3C2440 | |
| select S3C2440_XTAL_16934400 | |
| select PM_H1940 if PM | |
| select S3C_DEV_NAND | |
| help | |
| Say Y here if you are using the HP iPAQ rx3715. | |
| config ARCH_S3C2440 | |
| bool "SMDK2440" | |
| select CPU_S3C2440 | |
| select S3C2440_XTAL_16934400 | |
| select MACH_SMDK | |
| select S3C_DEV_USB_HOST | |
| select S3C_DEV_NAND | |
| help | |
| Say Y here if you are using the SMDK2440. | |
| config MACH_NEXCODER_2440 | |
| bool "NexVision NEXCODER 2440 Light Board" | |
| select CPU_S3C2440 | |
| select S3C2440_XTAL_12000000 | |
| select S3C_DEV_USB_HOST | |
| select S3C_DEV_NAND | |
| help | |
| Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board | |
| config SMDK2440_CPU2440 | |
| bool "SMDK2440 with S3C2440 CPU module" | |
| default y if ARCH_S3C2440 | |
| select S3C2440_XTAL_16934400 | |
| select CPU_S3C2440 | |
| config SMDK2440_CPU2442 | |
| bool "SMDM2440 with S3C2442 CPU module" | |
| select CPU_S3C2442 | |
| config MACH_AT2440EVB | |
| bool "Avantech AT2440EVB development board" | |
| select CPU_S3C2440 | |
| select S3C_DEV_USB_HOST | |
| select S3C_DEV_NAND | |
| help | |
| Say Y here if you are using the AT2440EVB development board | |
| config MACH_MINI2440 | |
| bool "MINI2440 development board" | |
| select CPU_S3C2440 | |
| select EEPROM_AT24 | |
| select NEW_LEDS | |
| select LEDS_CLASS | |
| select LEDS_TRIGGER | |
| select LEDS_TRIGGER_BACKLIGHT | |
| select S3C_DEV_NAND | |
| select S3C_DEV_USB_HOST | |
| help | |
| Say Y here to select support for the MINI2440. Is a 10cm x 10cm board | |
| available via various sources. It can come with a 3.5" or 7" touch LCD. | |
| config MACH_RX1950 | |
| bool "HP iPAQ rx1950" | |
| select CPU_S3C2442 | |
| select S3C24XX_DCLK | |
| select PM_H1940 if PM | |
| select I2C | |
| select S3C2410_PWM | |
| select S3C_DEV_NAND | |
| select S3C2410_IOTIMING if S3C2440_CPUFREQ | |
| select S3C2440_XTAL_16934400 | |
| help | |
| Say Y here if you're using HP iPAQ rx1950 | |
| endmenu |