| * MTD generic binding |
| |
| - nand-ecc-mode : String, operation mode of the NAND ecc mode. |
| Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first", |
| "soft_bch". |
| - nand-bus-width : 8 or 16 bus width if not present 8 |
| - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false |
| |
| - nand-ecc-strength: integer representing the number of bits to correct |
| per ECC step. |
| |
| - nand-ecc-step-size: integer representing the number of data bytes |
| that are covered by a single ECC step. |
| |
| The ECC strength and ECC step size properties define the correction capability |
| of a controller. Together, they say a controller can correct "{strength} bit |
| errors per {size} bytes". |
| |
| The interpretation of these parameters is implementation-defined, so not all |
| implementations must support all possible combinations. However, implementations |
| are encouraged to further specify the value(s) they support. |
