|  | /* | 
|  | *  Support for Sharp SL-C6000x PDAs | 
|  | *  Model: (Tosa) | 
|  | * | 
|  | *  Copyright (c) 2005 Dirk Opfer | 
|  | * | 
|  | *	Based on code written by Sharp/Lineo for 2.4 kernels | 
|  | * | 
|  | *  This program is free software; you can redistribute it and/or modify | 
|  | *  it under the terms of the GNU General Public License version 2 as | 
|  | *  published by the Free Software Foundation. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/major.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/fb.h> | 
|  | #include <linux/mmc/host.h> | 
|  | #include <linux/mfd/tc6393xb.h> | 
|  | #include <linux/mfd/tmio.h> | 
|  | #include <linux/mtd/nand.h> | 
|  | #include <linux/mtd/partitions.h> | 
|  | #include <linux/mtd/physmap.h> | 
|  | #include <linux/pm.h> | 
|  | #include <linux/gpio_keys.h> | 
|  | #include <linux/input.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/power/gpio-charger.h> | 
|  | #include <linux/spi/spi.h> | 
|  | #include <linux/spi/pxa2xx_spi.h> | 
|  | #include <linux/input/matrix_keypad.h> | 
|  | #include <linux/i2c/pxa-i2c.h> | 
|  | #include <linux/usb/gpio_vbus.h> | 
|  | #include <linux/reboot.h> | 
|  | #include <linux/memblock.h> | 
|  |  | 
|  | #include <asm/setup.h> | 
|  | #include <asm/mach-types.h> | 
|  |  | 
|  | #include <mach/pxa25x.h> | 
|  | #include <mach/reset.h> | 
|  | #include <linux/platform_data/irda-pxaficp.h> | 
|  | #include <linux/platform_data/mmc-pxamci.h> | 
|  | #include <mach/udc.h> | 
|  | #include <mach/tosa_bt.h> | 
|  | #include <mach/audio.h> | 
|  | #include <mach/smemc.h> | 
|  |  | 
|  | #include <asm/mach/arch.h> | 
|  | #include <mach/tosa.h> | 
|  |  | 
|  | #include <asm/hardware/scoop.h> | 
|  | #include <asm/mach/sharpsl_param.h> | 
|  |  | 
|  | #include "generic.h" | 
|  | #include "clock.h" | 
|  | #include "devices.h" | 
|  |  | 
|  | static unsigned long tosa_pin_config[] = { | 
|  | GPIO78_nCS_2, /* Scoop */ | 
|  | GPIO80_nCS_4, /* tg6393xb */ | 
|  | GPIO33_nCS_5, /* Scoop */ | 
|  |  | 
|  | // GPIO76 CARD_VCC_ON1 | 
|  |  | 
|  | GPIO19_GPIO, /* Reset out */ | 
|  | GPIO1_RST | WAKEUP_ON_EDGE_FALL, | 
|  |  | 
|  | GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* WAKE_UP */ | 
|  | GPIO2_GPIO | WAKEUP_ON_EDGE_BOTH, /* AC_IN */ | 
|  | GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* RECORD */ | 
|  | GPIO4_GPIO | WAKEUP_ON_EDGE_FALL, /* SYNC */ | 
|  | GPIO20_GPIO, /* EAR_IN */ | 
|  | GPIO22_GPIO, /* On */ | 
|  |  | 
|  | GPIO5_GPIO, /* USB_IN */ | 
|  | GPIO32_GPIO, /* Pen IRQ */ | 
|  |  | 
|  | GPIO7_GPIO, /* Jacket Detect */ | 
|  | GPIO14_GPIO, /* BAT0_CRG */ | 
|  | GPIO12_GPIO, /* BAT1_CRG */ | 
|  | GPIO17_GPIO, /* BAT0_LOW */ | 
|  | GPIO84_GPIO, /* BAT1_LOW */ | 
|  | GPIO38_GPIO, /* BAT_LOCK */ | 
|  |  | 
|  | GPIO11_3_6MHz, | 
|  | GPIO15_GPIO, /* TC6393XB IRQ */ | 
|  | GPIO18_RDY, | 
|  | GPIO27_GPIO, /* LCD Sync */ | 
|  |  | 
|  | /* MMC */ | 
|  | GPIO6_MMC_CLK, | 
|  | GPIO8_MMC_CS0, | 
|  | GPIO9_GPIO, /* Detect */ | 
|  | GPIO10_GPIO, /* nSD_INT */ | 
|  |  | 
|  | /* CF */ | 
|  | GPIO13_GPIO, /* CD_IRQ */ | 
|  | GPIO21_GPIO, /* Main Slot IRQ */ | 
|  | GPIO36_GPIO, /* Jacket Slot IRQ */ | 
|  | GPIO48_nPOE, | 
|  | GPIO49_nPWE, | 
|  | GPIO50_nPIOR, | 
|  | GPIO51_nPIOW, | 
|  | GPIO52_nPCE_1, | 
|  | GPIO53_nPCE_2, | 
|  | GPIO54_nPSKTSEL, | 
|  | GPIO55_nPREG, | 
|  | GPIO56_nPWAIT, | 
|  | GPIO57_nIOIS16, | 
|  |  | 
|  | /* AC97 */ | 
|  | GPIO31_AC97_SYNC, | 
|  | GPIO30_AC97_SDATA_OUT, | 
|  | GPIO28_AC97_BITCLK, | 
|  | GPIO29_AC97_SDATA_IN_0, | 
|  | // GPIO79 nAUD_IRQ | 
|  |  | 
|  | /* FFUART */ | 
|  | GPIO34_FFUART_RXD, | 
|  | GPIO35_FFUART_CTS, | 
|  | GPIO37_FFUART_DSR, | 
|  | GPIO39_FFUART_TXD, | 
|  | GPIO40_FFUART_DTR, | 
|  | GPIO41_FFUART_RTS, | 
|  |  | 
|  | /* BTUART */ | 
|  | GPIO42_BTUART_RXD, | 
|  | GPIO43_BTUART_TXD, | 
|  | GPIO44_BTUART_CTS, | 
|  | GPIO45_BTUART_RTS, | 
|  |  | 
|  | /* Keybd */ | 
|  | GPIO58_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 0 */ | 
|  | GPIO59_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 1 */ | 
|  | GPIO60_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 2 */ | 
|  | GPIO61_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 3 */ | 
|  | GPIO62_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 4 */ | 
|  | GPIO63_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 5 */ | 
|  | GPIO64_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 6 */ | 
|  | GPIO65_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 7 */ | 
|  | GPIO66_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 8 */ | 
|  | GPIO67_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 9 */ | 
|  | GPIO68_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 10 */ | 
|  | GPIO69_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 0 */ | 
|  | GPIO70_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 1 */ | 
|  | GPIO71_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 2 */ | 
|  | GPIO72_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 3 */ | 
|  | GPIO73_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 4 */ | 
|  | GPIO74_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 5 */ | 
|  | GPIO75_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 6 */ | 
|  |  | 
|  | /* SPI */ | 
|  | GPIO81_SSP2_CLK_OUT, | 
|  | GPIO82_SSP2_FRM_OUT, | 
|  | GPIO83_SSP2_TXD, | 
|  |  | 
|  | /* IrDA is managed in other way */ | 
|  | GPIO46_GPIO, | 
|  | GPIO47_GPIO, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * SCOOP Device | 
|  | */ | 
|  | static struct resource tosa_scoop_resources[] = { | 
|  | [0] = { | 
|  | .start	= TOSA_CF_PHYS, | 
|  | .end	= TOSA_CF_PHYS + 0xfff, | 
|  | .flags	= IORESOURCE_MEM, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct scoop_config tosa_scoop_setup = { | 
|  | .io_dir 	= TOSA_SCOOP_IO_DIR, | 
|  | .gpio_base	= TOSA_SCOOP_GPIO_BASE, | 
|  | }; | 
|  |  | 
|  | static struct platform_device tosascoop_device = { | 
|  | .name		= "sharp-scoop", | 
|  | .id		= 0, | 
|  | .dev		= { | 
|  | .platform_data	= &tosa_scoop_setup, | 
|  | }, | 
|  | .num_resources	= ARRAY_SIZE(tosa_scoop_resources), | 
|  | .resource	= tosa_scoop_resources, | 
|  | }; | 
|  |  | 
|  |  | 
|  | /* | 
|  | * SCOOP Device Jacket | 
|  | */ | 
|  | static struct resource tosa_scoop_jc_resources[] = { | 
|  | [0] = { | 
|  | .start		= TOSA_SCOOP_PHYS + 0x40, | 
|  | .end		= TOSA_SCOOP_PHYS + 0xfff, | 
|  | .flags		= IORESOURCE_MEM, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct scoop_config tosa_scoop_jc_setup = { | 
|  | .io_dir 	= TOSA_SCOOP_JC_IO_DIR, | 
|  | .gpio_base	= TOSA_SCOOP_JC_GPIO_BASE, | 
|  | }; | 
|  |  | 
|  | static struct platform_device tosascoop_jc_device = { | 
|  | .name		= "sharp-scoop", | 
|  | .id		= 1, | 
|  | .dev		= { | 
|  | .platform_data	= &tosa_scoop_jc_setup, | 
|  | .parent 	= &tosascoop_device.dev, | 
|  | }, | 
|  | .num_resources	= ARRAY_SIZE(tosa_scoop_jc_resources), | 
|  | .resource	= tosa_scoop_jc_resources, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * PCMCIA | 
|  | */ | 
|  | static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = { | 
|  | { | 
|  | .dev        = &tosascoop_device.dev, | 
|  | .irq        = TOSA_IRQ_GPIO_CF_IRQ, | 
|  | .cd_irq     = TOSA_IRQ_GPIO_CF_CD, | 
|  | .cd_irq_str = "PCMCIA0 CD", | 
|  | },{ | 
|  | .dev        = &tosascoop_jc_device.dev, | 
|  | .irq        = TOSA_IRQ_GPIO_JC_CF_IRQ, | 
|  | .cd_irq     = -1, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct scoop_pcmcia_config tosa_pcmcia_config = { | 
|  | .devs         = &tosa_pcmcia_scoop[0], | 
|  | .num_devs     = 2, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * USB Device Controller | 
|  | */ | 
|  | static struct gpio_vbus_mach_info tosa_udc_info = { | 
|  | .gpio_pullup		= TOSA_GPIO_USB_PULLUP, | 
|  | .gpio_vbus		= TOSA_GPIO_USB_IN, | 
|  | .gpio_vbus_inverted	= 1, | 
|  | }; | 
|  |  | 
|  | static struct platform_device tosa_gpio_vbus = { | 
|  | .name	= "gpio-vbus", | 
|  | .id	= -1, | 
|  | .dev	= { | 
|  | .platform_data	= &tosa_udc_info, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * MMC/SD Device | 
|  | */ | 
|  | static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void *data) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int"); | 
|  | if (err) { | 
|  | printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n"); | 
|  | goto err_gpio_int; | 
|  | } | 
|  | err = gpio_direction_input(TOSA_GPIO_nSD_INT); | 
|  | if (err) | 
|  | goto err_gpio_int_dir; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_gpio_int_dir: | 
|  | gpio_free(TOSA_GPIO_nSD_INT); | 
|  | err_gpio_int: | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void tosa_mci_exit(struct device *dev, void *data) | 
|  | { | 
|  | gpio_free(TOSA_GPIO_nSD_INT); | 
|  | } | 
|  |  | 
|  | static struct pxamci_platform_data tosa_mci_platform_data = { | 
|  | .detect_delay_ms	= 250, | 
|  | .ocr_mask       	= MMC_VDD_32_33|MMC_VDD_33_34, | 
|  | .init           	= tosa_mci_init, | 
|  | .exit           	= tosa_mci_exit, | 
|  | .gpio_card_detect	= TOSA_GPIO_nSD_DETECT, | 
|  | .gpio_card_ro		= TOSA_GPIO_SD_WP, | 
|  | .gpio_power		= TOSA_GPIO_PWR_ON, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Irda | 
|  | */ | 
|  | static void tosa_irda_transceiver_mode(struct device *dev, int mode) | 
|  | { | 
|  | if (mode & IR_OFF) { | 
|  | gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0); | 
|  | pxa2xx_transceiver_mode(dev, mode); | 
|  | gpio_direction_output(TOSA_GPIO_IRDA_TX, 0); | 
|  | } else { | 
|  | pxa2xx_transceiver_mode(dev, mode); | 
|  | gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int tosa_irda_startup(struct device *dev) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = gpio_request(TOSA_GPIO_IRDA_TX, "IrDA TX"); | 
|  | if (ret) | 
|  | goto err_tx; | 
|  | ret = gpio_direction_output(TOSA_GPIO_IRDA_TX, 0); | 
|  | if (ret) | 
|  | goto err_tx_dir; | 
|  |  | 
|  | ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown"); | 
|  | if (ret) | 
|  | goto err_pwr; | 
|  |  | 
|  | ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0); | 
|  | if (ret) | 
|  | goto err_pwr_dir; | 
|  |  | 
|  | tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_pwr_dir: | 
|  | gpio_free(TOSA_GPIO_IR_POWERDWN); | 
|  | err_pwr: | 
|  | err_tx_dir: | 
|  | gpio_free(TOSA_GPIO_IRDA_TX); | 
|  | err_tx: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void tosa_irda_shutdown(struct device *dev) | 
|  | { | 
|  | tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF); | 
|  | gpio_free(TOSA_GPIO_IR_POWERDWN); | 
|  | gpio_free(TOSA_GPIO_IRDA_TX); | 
|  | } | 
|  |  | 
|  | static struct pxaficp_platform_data tosa_ficp_platform_data = { | 
|  | .gpio_pwdown		= -1, | 
|  | .transceiver_cap	= IR_SIRMODE | IR_OFF, | 
|  | .transceiver_mode	= tosa_irda_transceiver_mode, | 
|  | .startup		= tosa_irda_startup, | 
|  | .shutdown		= tosa_irda_shutdown, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Tosa AC IN | 
|  | */ | 
|  | static char *tosa_ac_supplied_to[] = { | 
|  | "main-battery", | 
|  | "backup-battery", | 
|  | "jacket-battery", | 
|  | }; | 
|  |  | 
|  | static struct gpio_charger_platform_data tosa_power_data = { | 
|  | .name			= "charger", | 
|  | .type			= POWER_SUPPLY_TYPE_MAINS, | 
|  | .gpio			= TOSA_GPIO_AC_IN, | 
|  | .gpio_active_low	= 1, | 
|  | .supplied_to		= tosa_ac_supplied_to, | 
|  | .num_supplicants	= ARRAY_SIZE(tosa_ac_supplied_to), | 
|  | }; | 
|  |  | 
|  | static struct resource tosa_power_resource[] = { | 
|  | { | 
|  | .name		= "ac", | 
|  | .start		= PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN), | 
|  | .end		= PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN), | 
|  | .flags		= IORESOURCE_IRQ | | 
|  | IORESOURCE_IRQ_HIGHEDGE | | 
|  | IORESOURCE_IRQ_LOWEDGE, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct platform_device tosa_power_device = { | 
|  | .name			= "gpio-charger", | 
|  | .id			= -1, | 
|  | .dev.platform_data	= &tosa_power_data, | 
|  | .resource		= tosa_power_resource, | 
|  | .num_resources		= ARRAY_SIZE(tosa_power_resource), | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Tosa Keyboard | 
|  | */ | 
|  | static const uint32_t tosakbd_keymap[] = { | 
|  | KEY(0, 1, KEY_W), | 
|  | KEY(0, 5, KEY_K), | 
|  | KEY(0, 6, KEY_BACKSPACE), | 
|  | KEY(0, 7, KEY_P), | 
|  | KEY(1, 0, KEY_Q), | 
|  | KEY(1, 1, KEY_E), | 
|  | KEY(1, 2, KEY_T), | 
|  | KEY(1, 3, KEY_Y), | 
|  | KEY(1, 5, KEY_O), | 
|  | KEY(1, 6, KEY_I), | 
|  | KEY(1, 7, KEY_COMMA), | 
|  | KEY(2, 0, KEY_A), | 
|  | KEY(2, 1, KEY_D), | 
|  | KEY(2, 2, KEY_G), | 
|  | KEY(2, 3, KEY_U), | 
|  | KEY(2, 5, KEY_L), | 
|  | KEY(2, 6, KEY_ENTER), | 
|  | KEY(2, 7, KEY_DOT), | 
|  | KEY(3, 0, KEY_Z), | 
|  | KEY(3, 1, KEY_C), | 
|  | KEY(3, 2, KEY_V), | 
|  | KEY(3, 3, KEY_J), | 
|  | KEY(3, 4, TOSA_KEY_ADDRESSBOOK), | 
|  | KEY(3, 5, TOSA_KEY_CANCEL), | 
|  | KEY(3, 6, TOSA_KEY_CENTER), | 
|  | KEY(3, 7, TOSA_KEY_OK), | 
|  | KEY(3, 8, KEY_LEFTSHIFT), | 
|  | KEY(4, 0, KEY_S), | 
|  | KEY(4, 1, KEY_R), | 
|  | KEY(4, 2, KEY_B), | 
|  | KEY(4, 3, KEY_N), | 
|  | KEY(4, 4, TOSA_KEY_CALENDAR), | 
|  | KEY(4, 5, TOSA_KEY_HOMEPAGE), | 
|  | KEY(4, 6, KEY_LEFTCTRL), | 
|  | KEY(4, 7, TOSA_KEY_LIGHT), | 
|  | KEY(4, 9, KEY_RIGHTSHIFT), | 
|  | KEY(5, 0, KEY_TAB), | 
|  | KEY(5, 1, KEY_SLASH), | 
|  | KEY(5, 2, KEY_H), | 
|  | KEY(5, 3, KEY_M), | 
|  | KEY(5, 4, TOSA_KEY_MENU), | 
|  | KEY(5, 6, KEY_UP), | 
|  | KEY(5, 10, TOSA_KEY_FN), | 
|  | KEY(6, 0, KEY_X), | 
|  | KEY(6, 1, KEY_F), | 
|  | KEY(6, 2, KEY_SPACE), | 
|  | KEY(6, 3, KEY_APOSTROPHE), | 
|  | KEY(6, 4, TOSA_KEY_MAIL), | 
|  | KEY(6, 5, KEY_LEFT), | 
|  | KEY(6, 6, KEY_DOWN), | 
|  | KEY(6, 7, KEY_RIGHT), | 
|  | }; | 
|  |  | 
|  | static struct matrix_keymap_data tosakbd_keymap_data = { | 
|  | .keymap		= tosakbd_keymap, | 
|  | .keymap_size	= ARRAY_SIZE(tosakbd_keymap), | 
|  | }; | 
|  |  | 
|  | static const int tosakbd_col_gpios[] = | 
|  | { 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68 }; | 
|  | static const int tosakbd_row_gpios[] = | 
|  | { 69, 70, 71, 72, 73, 74, 75 }; | 
|  |  | 
|  | static struct matrix_keypad_platform_data tosakbd_pdata = { | 
|  | .keymap_data		= &tosakbd_keymap_data, | 
|  | .row_gpios		= tosakbd_row_gpios, | 
|  | .col_gpios		= tosakbd_col_gpios, | 
|  | .num_row_gpios		= ARRAY_SIZE(tosakbd_row_gpios), | 
|  | .num_col_gpios		= ARRAY_SIZE(tosakbd_col_gpios), | 
|  | .col_scan_delay_us	= 10, | 
|  | .debounce_ms		= 10, | 
|  | .wakeup			= 1, | 
|  | }; | 
|  |  | 
|  | static struct platform_device tosakbd_device = { | 
|  | .name		= "matrix-keypad", | 
|  | .id		= -1, | 
|  | .dev		= { | 
|  | .platform_data = &tosakbd_pdata, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct gpio_keys_button tosa_gpio_keys[] = { | 
|  | /* | 
|  | * Two following keys are directly tied to "ON" button of tosa. Why? | 
|  | * The first one can be used as a wakeup source, the second can't; | 
|  | * also the first one is OR of ac_powered and on_button. | 
|  | */ | 
|  | { | 
|  | .type	= EV_PWR, | 
|  | .code	= KEY_RESERVED, | 
|  | .gpio	= TOSA_GPIO_POWERON, | 
|  | .desc	= "Poweron", | 
|  | .wakeup	= 1, | 
|  | .active_low = 1, | 
|  | }, | 
|  | { | 
|  | .type	= EV_PWR, | 
|  | .code	= KEY_SUSPEND, | 
|  | .gpio	= TOSA_GPIO_ON_KEY, | 
|  | .desc	= "On key", | 
|  | /* | 
|  | * can't be used as wakeup | 
|  | * .wakeup	= 1, | 
|  | */ | 
|  | .active_low = 1, | 
|  | }, | 
|  | { | 
|  | .type	= EV_KEY, | 
|  | .code	= TOSA_KEY_RECORD, | 
|  | .gpio	= TOSA_GPIO_RECORD_BTN, | 
|  | .desc	= "Record Button", | 
|  | .wakeup	= 1, | 
|  | .active_low = 1, | 
|  | }, | 
|  | { | 
|  | .type	= EV_KEY, | 
|  | .code	= TOSA_KEY_SYNC, | 
|  | .gpio	= TOSA_GPIO_SYNC, | 
|  | .desc	= "Sync Button", | 
|  | .wakeup	= 1, | 
|  | .active_low = 1, | 
|  | }, | 
|  | { | 
|  | .type	= EV_SW, | 
|  | .code	= SW_HEADPHONE_INSERT, | 
|  | .gpio	= TOSA_GPIO_EAR_IN, | 
|  | .desc	= "HeadPhone insert", | 
|  | .active_low = 1, | 
|  | .debounce_interval = 300, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = { | 
|  | .buttons	= tosa_gpio_keys, | 
|  | .nbuttons	= ARRAY_SIZE(tosa_gpio_keys), | 
|  | }; | 
|  |  | 
|  | static struct platform_device tosa_gpio_keys_device = { | 
|  | .name	= "gpio-keys", | 
|  | .id	= -1, | 
|  | .dev	= { | 
|  | .platform_data	= &tosa_gpio_keys_platform_data, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Tosa LEDs | 
|  | */ | 
|  | static struct gpio_led tosa_gpio_leds[] = { | 
|  | { | 
|  | .name			= "tosa:amber:charge", | 
|  | .default_trigger	= "main-battery-charging", | 
|  | .gpio			= TOSA_GPIO_CHRG_ERR_LED, | 
|  | }, | 
|  | { | 
|  | .name			= "tosa:green:mail", | 
|  | .default_trigger	= "nand-disk", | 
|  | .gpio			= TOSA_GPIO_NOTE_LED, | 
|  | }, | 
|  | { | 
|  | .name			= "tosa:dual:wlan", | 
|  | .default_trigger	= "none", | 
|  | .gpio			= TOSA_GPIO_WLAN_LED, | 
|  | }, | 
|  | { | 
|  | .name			= "tosa:blue:bluetooth", | 
|  | .default_trigger	= "tosa-bt", | 
|  | .gpio			= TOSA_GPIO_BT_LED, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct gpio_led_platform_data tosa_gpio_leds_platform_data = { | 
|  | .leds		= tosa_gpio_leds, | 
|  | .num_leds	= ARRAY_SIZE(tosa_gpio_leds), | 
|  | }; | 
|  |  | 
|  | static struct platform_device tosaled_device = { | 
|  | .name	= "leds-gpio", | 
|  | .id	= -1, | 
|  | .dev	= { | 
|  | .platform_data	= &tosa_gpio_leds_platform_data, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Toshiba Mobile IO Controller | 
|  | */ | 
|  | static struct resource tc6393xb_resources[] = { | 
|  | [0] = { | 
|  | .start	= TOSA_LCDC_PHYS, | 
|  | .end	= TOSA_LCDC_PHYS + 0x3ffffff, | 
|  | .flags	= IORESOURCE_MEM, | 
|  | }, | 
|  |  | 
|  | [1] = { | 
|  | .start	= TOSA_IRQ_GPIO_TC6393XB_INT, | 
|  | .end	= TOSA_IRQ_GPIO_TC6393XB_INT, | 
|  | .flags	= IORESOURCE_IRQ, | 
|  | }, | 
|  | }; | 
|  |  | 
|  |  | 
|  | static int tosa_tc6393xb_enable(struct platform_device *dev) | 
|  | { | 
|  | int rc; | 
|  |  | 
|  | rc = gpio_request(TOSA_GPIO_TC6393XB_REST_IN, "tc6393xb #pclr"); | 
|  | if (rc) | 
|  | goto err_req_pclr; | 
|  | rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend"); | 
|  | if (rc) | 
|  | goto err_req_suspend; | 
|  | rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "tc6393xb l3v"); | 
|  | if (rc) | 
|  | goto err_req_l3v; | 
|  | rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0); | 
|  | if (rc) | 
|  | goto err_dir_l3v; | 
|  | rc = gpio_direction_output(TOSA_GPIO_TC6393XB_SUSPEND, 0); | 
|  | if (rc) | 
|  | goto err_dir_suspend; | 
|  | rc = gpio_direction_output(TOSA_GPIO_TC6393XB_REST_IN, 0); | 
|  | if (rc) | 
|  | goto err_dir_pclr; | 
|  |  | 
|  | mdelay(1); | 
|  |  | 
|  | gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1); | 
|  |  | 
|  | mdelay(10); | 
|  |  | 
|  | gpio_set_value(TOSA_GPIO_TC6393XB_REST_IN, 1); | 
|  | gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1); | 
|  |  | 
|  | return 0; | 
|  | err_dir_pclr: | 
|  | err_dir_suspend: | 
|  | err_dir_l3v: | 
|  | gpio_free(TOSA_GPIO_TC6393XB_L3V_ON); | 
|  | err_req_l3v: | 
|  | gpio_free(TOSA_GPIO_TC6393XB_SUSPEND); | 
|  | err_req_suspend: | 
|  | gpio_free(TOSA_GPIO_TC6393XB_REST_IN); | 
|  | err_req_pclr: | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int tosa_tc6393xb_disable(struct platform_device *dev) | 
|  | { | 
|  | gpio_free(TOSA_GPIO_TC6393XB_L3V_ON); | 
|  | gpio_free(TOSA_GPIO_TC6393XB_SUSPEND); | 
|  | gpio_free(TOSA_GPIO_TC6393XB_REST_IN); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int tosa_tc6393xb_resume(struct platform_device *dev) | 
|  | { | 
|  | gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1); | 
|  | mdelay(10); | 
|  | gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1); | 
|  | mdelay(10); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int tosa_tc6393xb_suspend(struct platform_device *dev) | 
|  | { | 
|  | gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 0); | 
|  | gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 0); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct mtd_partition tosa_nand_partition[] = { | 
|  | { | 
|  | .name	= "smf", | 
|  | .offset	= 0, | 
|  | .size	= 7 * 1024 * 1024, | 
|  | }, | 
|  | { | 
|  | .name	= "root", | 
|  | .offset	= MTDPART_OFS_APPEND, | 
|  | .size	= 28 * 1024 * 1024, | 
|  | }, | 
|  | { | 
|  | .name	= "home", | 
|  | .offset	= MTDPART_OFS_APPEND, | 
|  | .size	= MTDPART_SIZ_FULL, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; | 
|  |  | 
|  | static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = { | 
|  | .options	= 0, | 
|  | .offs		= 4, | 
|  | .len		= 2, | 
|  | .pattern	= scan_ff_pattern | 
|  | }; | 
|  |  | 
|  | static struct tmio_nand_data tosa_tc6393xb_nand_config = { | 
|  | .num_partitions	= ARRAY_SIZE(tosa_nand_partition), | 
|  | .partition	= tosa_nand_partition, | 
|  | .badblock_pattern = &tosa_tc6393xb_nand_bbt, | 
|  | }; | 
|  |  | 
|  | static int tosa_tc6393xb_setup(struct platform_device *dev) | 
|  | { | 
|  | int rc; | 
|  |  | 
|  | rc = gpio_request(TOSA_GPIO_CARD_VCC_ON, "CARD_VCC_ON"); | 
|  | if (rc) | 
|  | goto err_req; | 
|  |  | 
|  | rc = gpio_direction_output(TOSA_GPIO_CARD_VCC_ON, 1); | 
|  | if (rc) | 
|  | goto err_dir; | 
|  |  | 
|  | return rc; | 
|  |  | 
|  | err_dir: | 
|  | gpio_free(TOSA_GPIO_CARD_VCC_ON); | 
|  | err_req: | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static void tosa_tc6393xb_teardown(struct platform_device *dev) | 
|  | { | 
|  | gpio_free(TOSA_GPIO_CARD_VCC_ON); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_MFD_TC6393XB | 
|  | static struct fb_videomode tosa_tc6393xb_lcd_mode[] = { | 
|  | { | 
|  | .xres = 480, | 
|  | .yres = 640, | 
|  | .pixclock = 0x002cdf00,/* PLL divisor */ | 
|  | .left_margin = 0x004c, | 
|  | .right_margin = 0x005b, | 
|  | .upper_margin = 0x0001, | 
|  | .lower_margin = 0x000d, | 
|  | .hsync_len = 0x0002, | 
|  | .vsync_len = 0x0001, | 
|  | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | 
|  | .vmode = FB_VMODE_NONINTERLACED, | 
|  | },{ | 
|  | .xres = 240, | 
|  | .yres = 320, | 
|  | .pixclock = 0x00e7f203,/* PLL divisor */ | 
|  | .left_margin = 0x0024, | 
|  | .right_margin = 0x002f, | 
|  | .upper_margin = 0x0001, | 
|  | .lower_margin = 0x000d, | 
|  | .hsync_len = 0x0002, | 
|  | .vsync_len = 0x0001, | 
|  | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | 
|  | .vmode = FB_VMODE_NONINTERLACED, | 
|  | } | 
|  | }; | 
|  |  | 
|  | static struct tmio_fb_data tosa_tc6393xb_fb_config = { | 
|  | .lcd_set_power	= tc6393xb_lcd_set_power, | 
|  | .lcd_mode	= tc6393xb_lcd_mode, | 
|  | .num_modes	= ARRAY_SIZE(tosa_tc6393xb_lcd_mode), | 
|  | .modes		= &tosa_tc6393xb_lcd_mode[0], | 
|  | .height		= 82, | 
|  | .width		= 60, | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | static struct tc6393xb_platform_data tosa_tc6393xb_data = { | 
|  | .scr_pll2cr	= 0x0cc1, | 
|  | .scr_gper	= 0x3300, | 
|  |  | 
|  | .irq_base	= IRQ_BOARD_START, | 
|  | .gpio_base	= TOSA_TC6393XB_GPIO_BASE, | 
|  | .setup		= tosa_tc6393xb_setup, | 
|  | .teardown	= tosa_tc6393xb_teardown, | 
|  |  | 
|  | .enable		= tosa_tc6393xb_enable, | 
|  | .disable	= tosa_tc6393xb_disable, | 
|  | .suspend	= tosa_tc6393xb_suspend, | 
|  | .resume		= tosa_tc6393xb_resume, | 
|  |  | 
|  | .nand_data	= &tosa_tc6393xb_nand_config, | 
|  | #ifdef CONFIG_MFD_TC6393XB | 
|  | .fb_data	= &tosa_tc6393xb_fb_config, | 
|  | #endif | 
|  |  | 
|  | .resume_restore = 1, | 
|  | }; | 
|  |  | 
|  |  | 
|  | static struct platform_device tc6393xb_device = { | 
|  | .name	= "tc6393xb", | 
|  | .id	= -1, | 
|  | .dev	= { | 
|  | .platform_data	= &tosa_tc6393xb_data, | 
|  | }, | 
|  | .num_resources	= ARRAY_SIZE(tc6393xb_resources), | 
|  | .resource	= tc6393xb_resources, | 
|  | }; | 
|  |  | 
|  | static struct tosa_bt_data tosa_bt_data = { | 
|  | .gpio_pwr	= TOSA_GPIO_BT_PWR_EN, | 
|  | .gpio_reset	= TOSA_GPIO_BT_RESET, | 
|  | }; | 
|  |  | 
|  | static struct platform_device tosa_bt_device = { | 
|  | .name	= "tosa-bt", | 
|  | .id	= -1, | 
|  | .dev.platform_data = &tosa_bt_data, | 
|  | }; | 
|  |  | 
|  | static struct pxa2xx_spi_master pxa_ssp_master_info = { | 
|  | .num_chipselect	= 1, | 
|  | }; | 
|  |  | 
|  | static struct spi_board_info spi_board_info[] __initdata = { | 
|  | { | 
|  | .modalias	= "tosa-lcd", | 
|  | // .platform_data | 
|  | .max_speed_hz	= 28750, | 
|  | .bus_num	= 2, | 
|  | .chip_select	= 0, | 
|  | .mode		= SPI_MODE_0, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct mtd_partition sharpsl_rom_parts[] = { | 
|  | { | 
|  | .name	="Boot PROM Filesystem", | 
|  | .offset	= 0x00160000, | 
|  | .size	= MTDPART_SIZ_FULL, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct physmap_flash_data sharpsl_rom_data = { | 
|  | .width		= 2, | 
|  | .nr_parts	= ARRAY_SIZE(sharpsl_rom_parts), | 
|  | .parts		= sharpsl_rom_parts, | 
|  | }; | 
|  |  | 
|  | static struct resource sharpsl_rom_resources[] = { | 
|  | { | 
|  | .start	= 0x00000000, | 
|  | .end	= 0x007fffff, | 
|  | .flags	= IORESOURCE_MEM, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct platform_device sharpsl_rom_device = { | 
|  | .name	= "physmap-flash", | 
|  | .id	= -1, | 
|  | .resource = sharpsl_rom_resources, | 
|  | .num_resources = ARRAY_SIZE(sharpsl_rom_resources), | 
|  | .dev.platform_data = &sharpsl_rom_data, | 
|  | }; | 
|  |  | 
|  | static struct platform_device wm9712_device = { | 
|  | .name	= "wm9712-codec", | 
|  | .id	= -1, | 
|  | }; | 
|  |  | 
|  | static struct platform_device tosa_audio_device = { | 
|  | .name	= "tosa-audio", | 
|  | .id	= -1, | 
|  | }; | 
|  |  | 
|  | static struct platform_device *devices[] __initdata = { | 
|  | &tosascoop_device, | 
|  | &tosascoop_jc_device, | 
|  | &tc6393xb_device, | 
|  | &tosa_power_device, | 
|  | &tosakbd_device, | 
|  | &tosa_gpio_keys_device, | 
|  | &tosaled_device, | 
|  | &tosa_bt_device, | 
|  | &sharpsl_rom_device, | 
|  | &wm9712_device, | 
|  | &tosa_gpio_vbus, | 
|  | &tosa_audio_device, | 
|  | }; | 
|  |  | 
|  | static void tosa_poweroff(void) | 
|  | { | 
|  | pxa_restart(REBOOT_GPIO, NULL); | 
|  | } | 
|  |  | 
|  | static void tosa_restart(enum reboot_mode mode, const char *cmd) | 
|  | { | 
|  | uint32_t msc0 = __raw_readl(MSC0); | 
|  |  | 
|  | /* Bootloader magic for a reboot */ | 
|  | if((msc0 & 0xffff0000) == 0x7ff00000) | 
|  | __raw_writel((msc0 & 0xffff) | 0x7ee00000, MSC0); | 
|  |  | 
|  | tosa_poweroff(); | 
|  | } | 
|  |  | 
|  | static void __init tosa_init(void) | 
|  | { | 
|  | pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config)); | 
|  |  | 
|  | pxa_set_ffuart_info(NULL); | 
|  | pxa_set_btuart_info(NULL); | 
|  | pxa_set_stuart_info(NULL); | 
|  |  | 
|  | gpio_set_wake(MFP_PIN_GPIO1, 1); | 
|  | /* We can't pass to gpio-keys since it will drop the Reset altfunc */ | 
|  |  | 
|  | init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0); | 
|  |  | 
|  | pm_power_off = tosa_poweroff; | 
|  |  | 
|  | PCFR |= PCFR_OPDE; | 
|  |  | 
|  | /* enable batt_fault */ | 
|  | PMCR = 0x01; | 
|  |  | 
|  | pxa_set_mci_info(&tosa_mci_platform_data); | 
|  | pxa_set_ficp_info(&tosa_ficp_platform_data); | 
|  | pxa_set_i2c_info(NULL); | 
|  | pxa_set_ac97_info(NULL); | 
|  | platform_scoop_config = &tosa_pcmcia_config; | 
|  |  | 
|  | pxa2xx_set_spi_info(2, &pxa_ssp_master_info); | 
|  | spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); | 
|  |  | 
|  | clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL); | 
|  |  | 
|  | platform_add_devices(devices, ARRAY_SIZE(devices)); | 
|  | } | 
|  |  | 
|  | static void __init fixup_tosa(struct tag *tags, char **cmdline) | 
|  | { | 
|  | sharpsl_save_param(); | 
|  | memblock_add(0xa0000000, SZ_64M); | 
|  | } | 
|  |  | 
|  | MACHINE_START(TOSA, "SHARP Tosa") | 
|  | .fixup          = fixup_tosa, | 
|  | .map_io         = pxa25x_map_io, | 
|  | .nr_irqs	= TOSA_NR_IRQS, | 
|  | .init_irq       = pxa25x_init_irq, | 
|  | .handle_irq       = pxa25x_handle_irq, | 
|  | .init_machine   = tosa_init, | 
|  | .init_time	= pxa_timer_init, | 
|  | .restart	= tosa_restart, | 
|  | MACHINE_END |