|  | /* | 
|  | * This file is part of wl12xx | 
|  | * | 
|  | * Copyright (C) 2012 Texas Instruments. All rights reserved. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * version 2 as published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but | 
|  | * WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | * General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | 
|  | * 02110-1301 USA | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/ieee80211.h> | 
|  | #include "scan.h" | 
|  | #include "../wlcore/debug.h" | 
|  | #include "../wlcore/tx.h" | 
|  |  | 
|  | static int wl1271_get_scan_channels(struct wl1271 *wl, | 
|  | struct cfg80211_scan_request *req, | 
|  | struct basic_scan_channel_params *channels, | 
|  | enum ieee80211_band band, bool passive) | 
|  | { | 
|  | struct conf_scan_settings *c = &wl->conf.scan; | 
|  | int i, j; | 
|  | u32 flags; | 
|  |  | 
|  | for (i = 0, j = 0; | 
|  | i < req->n_channels && j < WL1271_SCAN_MAX_CHANNELS; | 
|  | i++) { | 
|  | flags = req->channels[i]->flags; | 
|  |  | 
|  | if (!test_bit(i, wl->scan.scanned_ch) && | 
|  | !(flags & IEEE80211_CHAN_DISABLED) && | 
|  | (req->channels[i]->band == band) && | 
|  | /* | 
|  | * In passive scans, we scan all remaining | 
|  | * channels, even if not marked as such. | 
|  | * In active scans, we only scan channels not | 
|  | * marked as passive. | 
|  | */ | 
|  | (passive || !(flags & IEEE80211_CHAN_NO_IR))) { | 
|  | wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ", | 
|  | req->channels[i]->band, | 
|  | req->channels[i]->center_freq); | 
|  | wl1271_debug(DEBUG_SCAN, "hw_value %d, flags %X", | 
|  | req->channels[i]->hw_value, | 
|  | req->channels[i]->flags); | 
|  | wl1271_debug(DEBUG_SCAN, | 
|  | "max_antenna_gain %d, max_power %d", | 
|  | req->channels[i]->max_antenna_gain, | 
|  | req->channels[i]->max_power); | 
|  | wl1271_debug(DEBUG_SCAN, "beacon_found %d", | 
|  | req->channels[i]->beacon_found); | 
|  |  | 
|  | if (!passive) { | 
|  | channels[j].min_duration = | 
|  | cpu_to_le32(c->min_dwell_time_active); | 
|  | channels[j].max_duration = | 
|  | cpu_to_le32(c->max_dwell_time_active); | 
|  | } else { | 
|  | channels[j].min_duration = | 
|  | cpu_to_le32(c->dwell_time_passive); | 
|  | channels[j].max_duration = | 
|  | cpu_to_le32(c->dwell_time_passive); | 
|  | } | 
|  | channels[j].early_termination = 0; | 
|  | channels[j].tx_power_att = req->channels[i]->max_power; | 
|  | channels[j].channel = req->channels[i]->hw_value; | 
|  |  | 
|  | memset(&channels[j].bssid_lsb, 0xff, 4); | 
|  | memset(&channels[j].bssid_msb, 0xff, 2); | 
|  |  | 
|  | /* Mark the channels we already used */ | 
|  | set_bit(i, wl->scan.scanned_ch); | 
|  |  | 
|  | j++; | 
|  | } | 
|  | } | 
|  |  | 
|  | return j; | 
|  | } | 
|  |  | 
|  | #define WL1271_NOTHING_TO_SCAN 1 | 
|  |  | 
|  | static int wl1271_scan_send(struct wl1271 *wl, struct wl12xx_vif *wlvif, | 
|  | enum ieee80211_band band, | 
|  | bool passive, u32 basic_rate) | 
|  | { | 
|  | struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif); | 
|  | struct wl1271_cmd_scan *cmd; | 
|  | struct wl1271_cmd_trigger_scan_to *trigger; | 
|  | int ret; | 
|  | u16 scan_options = 0; | 
|  |  | 
|  | /* skip active scans if we don't have SSIDs */ | 
|  | if (!passive && wl->scan.req->n_ssids == 0) | 
|  | return WL1271_NOTHING_TO_SCAN; | 
|  |  | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | trigger = kzalloc(sizeof(*trigger), GFP_KERNEL); | 
|  | if (!cmd || !trigger) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (wl->conf.scan.split_scan_timeout) | 
|  | scan_options |= WL1271_SCAN_OPT_SPLIT_SCAN; | 
|  |  | 
|  | if (passive) | 
|  | scan_options |= WL1271_SCAN_OPT_PASSIVE; | 
|  |  | 
|  | cmd->params.role_id = wlvif->role_id; | 
|  |  | 
|  | if (WARN_ON(cmd->params.role_id == WL12XX_INVALID_ROLE_ID)) { | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | cmd->params.scan_options = cpu_to_le16(scan_options); | 
|  |  | 
|  | cmd->params.n_ch = wl1271_get_scan_channels(wl, wl->scan.req, | 
|  | cmd->channels, | 
|  | band, passive); | 
|  | if (cmd->params.n_ch == 0) { | 
|  | ret = WL1271_NOTHING_TO_SCAN; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | cmd->params.tx_rate = cpu_to_le32(basic_rate); | 
|  | cmd->params.n_probe_reqs = wl->conf.scan.num_probe_reqs; | 
|  | cmd->params.tid_trigger = CONF_TX_AC_ANY_TID; | 
|  | cmd->params.scan_tag = WL1271_SCAN_DEFAULT_TAG; | 
|  |  | 
|  | if (band == IEEE80211_BAND_2GHZ) | 
|  | cmd->params.band = WL1271_SCAN_BAND_2_4_GHZ; | 
|  | else | 
|  | cmd->params.band = WL1271_SCAN_BAND_5_GHZ; | 
|  |  | 
|  | if (wl->scan.ssid_len && wl->scan.ssid) { | 
|  | cmd->params.ssid_len = wl->scan.ssid_len; | 
|  | memcpy(cmd->params.ssid, wl->scan.ssid, wl->scan.ssid_len); | 
|  | } | 
|  |  | 
|  | memcpy(cmd->addr, vif->addr, ETH_ALEN); | 
|  |  | 
|  | ret = wl12xx_cmd_build_probe_req(wl, wlvif, | 
|  | cmd->params.role_id, band, | 
|  | wl->scan.ssid, wl->scan.ssid_len, | 
|  | wl->scan.req->ie, | 
|  | wl->scan.req->ie_len, NULL, 0, false); | 
|  | if (ret < 0) { | 
|  | wl1271_error("PROBE request template failed"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | trigger->timeout = cpu_to_le32(wl->conf.scan.split_scan_timeout); | 
|  | ret = wl1271_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger, | 
|  | sizeof(*trigger), 0); | 
|  | if (ret < 0) { | 
|  | wl1271_error("trigger scan to failed for hw scan"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | wl1271_dump(DEBUG_SCAN, "SCAN: ", cmd, sizeof(*cmd)); | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd), 0); | 
|  | if (ret < 0) { | 
|  | wl1271_error("SCAN failed"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | kfree(cmd); | 
|  | kfree(trigger); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl12xx_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif) | 
|  | { | 
|  | struct wl1271_cmd_header *cmd = NULL; | 
|  | int ret = 0; | 
|  |  | 
|  | if (WARN_ON(wl->scan.state == WL1271_SCAN_STATE_IDLE)) | 
|  | return -EINVAL; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd scan stop"); | 
|  |  | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!cmd) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_STOP_SCAN, cmd, | 
|  | sizeof(*cmd), 0); | 
|  | if (ret < 0) { | 
|  | wl1271_error("cmd stop_scan failed"); | 
|  | goto out; | 
|  | } | 
|  | out: | 
|  | kfree(cmd); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | void wl1271_scan_stm(struct wl1271 *wl, struct wl12xx_vif *wlvif) | 
|  | { | 
|  | int ret = 0; | 
|  | enum ieee80211_band band; | 
|  | u32 rate, mask; | 
|  |  | 
|  | switch (wl->scan.state) { | 
|  | case WL1271_SCAN_STATE_IDLE: | 
|  | break; | 
|  |  | 
|  | case WL1271_SCAN_STATE_2GHZ_ACTIVE: | 
|  | band = IEEE80211_BAND_2GHZ; | 
|  | mask = wlvif->bitrate_masks[band]; | 
|  | if (wl->scan.req->no_cck) { | 
|  | mask &= ~CONF_TX_CCK_RATES; | 
|  | if (!mask) | 
|  | mask = CONF_TX_RATE_MASK_BASIC_P2P; | 
|  | } | 
|  | rate = wl1271_tx_min_rate_get(wl, mask); | 
|  | ret = wl1271_scan_send(wl, wlvif, band, false, rate); | 
|  | if (ret == WL1271_NOTHING_TO_SCAN) { | 
|  | wl->scan.state = WL1271_SCAN_STATE_2GHZ_PASSIVE; | 
|  | wl1271_scan_stm(wl, wlvif); | 
|  | } | 
|  |  | 
|  | break; | 
|  |  | 
|  | case WL1271_SCAN_STATE_2GHZ_PASSIVE: | 
|  | band = IEEE80211_BAND_2GHZ; | 
|  | mask = wlvif->bitrate_masks[band]; | 
|  | if (wl->scan.req->no_cck) { | 
|  | mask &= ~CONF_TX_CCK_RATES; | 
|  | if (!mask) | 
|  | mask = CONF_TX_RATE_MASK_BASIC_P2P; | 
|  | } | 
|  | rate = wl1271_tx_min_rate_get(wl, mask); | 
|  | ret = wl1271_scan_send(wl, wlvif, band, true, rate); | 
|  | if (ret == WL1271_NOTHING_TO_SCAN) { | 
|  | if (wl->enable_11a) | 
|  | wl->scan.state = WL1271_SCAN_STATE_5GHZ_ACTIVE; | 
|  | else | 
|  | wl->scan.state = WL1271_SCAN_STATE_DONE; | 
|  | wl1271_scan_stm(wl, wlvif); | 
|  | } | 
|  |  | 
|  | break; | 
|  |  | 
|  | case WL1271_SCAN_STATE_5GHZ_ACTIVE: | 
|  | band = IEEE80211_BAND_5GHZ; | 
|  | rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]); | 
|  | ret = wl1271_scan_send(wl, wlvif, band, false, rate); | 
|  | if (ret == WL1271_NOTHING_TO_SCAN) { | 
|  | wl->scan.state = WL1271_SCAN_STATE_5GHZ_PASSIVE; | 
|  | wl1271_scan_stm(wl, wlvif); | 
|  | } | 
|  |  | 
|  | break; | 
|  |  | 
|  | case WL1271_SCAN_STATE_5GHZ_PASSIVE: | 
|  | band = IEEE80211_BAND_5GHZ; | 
|  | rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]); | 
|  | ret = wl1271_scan_send(wl, wlvif, band, true, rate); | 
|  | if (ret == WL1271_NOTHING_TO_SCAN) { | 
|  | wl->scan.state = WL1271_SCAN_STATE_DONE; | 
|  | wl1271_scan_stm(wl, wlvif); | 
|  | } | 
|  |  | 
|  | break; | 
|  |  | 
|  | case WL1271_SCAN_STATE_DONE: | 
|  | wl->scan.failed = false; | 
|  | cancel_delayed_work(&wl->scan_complete_work); | 
|  | ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, | 
|  | msecs_to_jiffies(0)); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | wl1271_error("invalid scan state"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (ret < 0) { | 
|  | cancel_delayed_work(&wl->scan_complete_work); | 
|  | ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, | 
|  | msecs_to_jiffies(0)); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void wl12xx_adjust_channels(struct wl1271_cmd_sched_scan_config *cmd, | 
|  | struct wlcore_scan_channels *cmd_channels) | 
|  | { | 
|  | memcpy(cmd->passive, cmd_channels->passive, sizeof(cmd->passive)); | 
|  | memcpy(cmd->active, cmd_channels->active, sizeof(cmd->active)); | 
|  | cmd->dfs = cmd_channels->dfs; | 
|  | cmd->n_pactive_ch = cmd_channels->passive_active; | 
|  |  | 
|  | memcpy(cmd->channels_2, cmd_channels->channels_2, | 
|  | sizeof(cmd->channels_2)); | 
|  | memcpy(cmd->channels_5, cmd_channels->channels_5, | 
|  | sizeof(cmd->channels_5)); | 
|  | /* channels_4 are not supported, so no need to copy them */ | 
|  | } | 
|  |  | 
|  | int wl1271_scan_sched_scan_config(struct wl1271 *wl, | 
|  | struct wl12xx_vif *wlvif, | 
|  | struct cfg80211_sched_scan_request *req, | 
|  | struct ieee80211_scan_ies *ies) | 
|  | { | 
|  | struct wl1271_cmd_sched_scan_config *cfg = NULL; | 
|  | struct wlcore_scan_channels *cfg_channels = NULL; | 
|  | struct conf_sched_scan_settings *c = &wl->conf.sched_scan; | 
|  | int i, ret; | 
|  | bool force_passive = !req->n_ssids; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config"); | 
|  |  | 
|  | cfg = kzalloc(sizeof(*cfg), GFP_KERNEL); | 
|  | if (!cfg) | 
|  | return -ENOMEM; | 
|  |  | 
|  | cfg->role_id = wlvif->role_id; | 
|  | cfg->rssi_threshold = c->rssi_threshold; | 
|  | cfg->snr_threshold  = c->snr_threshold; | 
|  | cfg->n_probe_reqs = c->num_probe_reqs; | 
|  | /* cycles set to 0 it means infinite (until manually stopped) */ | 
|  | cfg->cycles = 0; | 
|  | /* report APs when at least 1 is found */ | 
|  | cfg->report_after = 1; | 
|  | /* don't stop scanning automatically when something is found */ | 
|  | cfg->terminate = 0; | 
|  | cfg->tag = WL1271_SCAN_DEFAULT_TAG; | 
|  | /* don't filter on BSS type */ | 
|  | cfg->bss_type = SCAN_BSS_TYPE_ANY; | 
|  | /* currently NL80211 supports only a single interval */ | 
|  | for (i = 0; i < SCAN_MAX_CYCLE_INTERVALS; i++) | 
|  | cfg->intervals[i] = cpu_to_le32(req->interval); | 
|  |  | 
|  | cfg->ssid_len = 0; | 
|  | ret = wlcore_scan_sched_scan_ssid_list(wl, wlvif, req); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  |  | 
|  | cfg->filter_type = ret; | 
|  |  | 
|  | wl1271_debug(DEBUG_SCAN, "filter_type = %d", cfg->filter_type); | 
|  |  | 
|  | cfg_channels = kzalloc(sizeof(*cfg_channels), GFP_KERNEL); | 
|  | if (!cfg_channels) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (!wlcore_set_scan_chan_params(wl, cfg_channels, req->channels, | 
|  | req->n_channels, req->n_ssids, | 
|  | SCAN_TYPE_PERIODIC)) { | 
|  | wl1271_error("scan channel list is empty"); | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  | wl12xx_adjust_channels(cfg, cfg_channels); | 
|  |  | 
|  | if (!force_passive && cfg->active[0]) { | 
|  | u8 band = IEEE80211_BAND_2GHZ; | 
|  | ret = wl12xx_cmd_build_probe_req(wl, wlvif, | 
|  | wlvif->role_id, band, | 
|  | req->ssids[0].ssid, | 
|  | req->ssids[0].ssid_len, | 
|  | ies->ies[band], | 
|  | ies->len[band], | 
|  | ies->common_ies, | 
|  | ies->common_ie_len, | 
|  | true); | 
|  | if (ret < 0) { | 
|  | wl1271_error("2.4GHz PROBE request template failed"); | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!force_passive && cfg->active[1]) { | 
|  | u8 band = IEEE80211_BAND_5GHZ; | 
|  | ret = wl12xx_cmd_build_probe_req(wl, wlvif, | 
|  | wlvif->role_id, band, | 
|  | req->ssids[0].ssid, | 
|  | req->ssids[0].ssid_len, | 
|  | ies->ies[band], | 
|  | ies->len[band], | 
|  | ies->common_ies, | 
|  | ies->common_ie_len, | 
|  | true); | 
|  | if (ret < 0) { | 
|  | wl1271_error("5GHz PROBE request template failed"); | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | wl1271_dump(DEBUG_SCAN, "SCAN_CFG: ", cfg, sizeof(*cfg)); | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_CONNECTION_SCAN_CFG, cfg, | 
|  | sizeof(*cfg), 0); | 
|  | if (ret < 0) { | 
|  | wl1271_error("SCAN configuration failed"); | 
|  | goto out; | 
|  | } | 
|  | out: | 
|  | kfree(cfg_channels); | 
|  | kfree(cfg); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_scan_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif) | 
|  | { | 
|  | struct wl1271_cmd_sched_scan_start *start; | 
|  | int ret = 0; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd periodic scan start"); | 
|  |  | 
|  | if (wlvif->bss_type != BSS_TYPE_STA_BSS) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | if ((wl->quirks & WLCORE_QUIRK_NO_SCHED_SCAN_WHILE_CONN) && | 
|  | test_bit(WLVIF_FLAG_IN_USE, &wlvif->flags)) | 
|  | return -EBUSY; | 
|  |  | 
|  | start = kzalloc(sizeof(*start), GFP_KERNEL); | 
|  | if (!start) | 
|  | return -ENOMEM; | 
|  |  | 
|  | start->role_id = wlvif->role_id; | 
|  | start->tag = WL1271_SCAN_DEFAULT_TAG; | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_START_PERIODIC_SCAN, start, | 
|  | sizeof(*start), 0); | 
|  | if (ret < 0) { | 
|  | wl1271_error("failed to send scan start command"); | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | out_free: | 
|  | kfree(start); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl12xx_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif  *wlvif, | 
|  | struct cfg80211_sched_scan_request *req, | 
|  | struct ieee80211_scan_ies *ies) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = wl1271_scan_sched_scan_config(wl, wlvif, req, ies); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return wl1271_scan_sched_scan_start(wl, wlvif); | 
|  | } | 
|  |  | 
|  | void wl12xx_scan_sched_scan_stop(struct wl1271 *wl,  struct wl12xx_vif *wlvif) | 
|  | { | 
|  | struct wl1271_cmd_sched_scan_stop *stop; | 
|  | int ret = 0; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd periodic scan stop"); | 
|  |  | 
|  | /* FIXME: what to do if alloc'ing to stop fails? */ | 
|  | stop = kzalloc(sizeof(*stop), GFP_KERNEL); | 
|  | if (!stop) { | 
|  | wl1271_error("failed to alloc memory to send sched scan stop"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | stop->role_id = wlvif->role_id; | 
|  | stop->tag = WL1271_SCAN_DEFAULT_TAG; | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_STOP_PERIODIC_SCAN, stop, | 
|  | sizeof(*stop), 0); | 
|  | if (ret < 0) { | 
|  | wl1271_error("failed to send sched scan stop command"); | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | out_free: | 
|  | kfree(stop); | 
|  | } | 
|  |  | 
|  | int wl12xx_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, | 
|  | struct cfg80211_scan_request *req) | 
|  | { | 
|  | wl1271_scan_stm(wl, wlvif); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void wl12xx_scan_completed(struct wl1271 *wl, struct wl12xx_vif *wlvif) | 
|  | { | 
|  | wl1271_scan_stm(wl, wlvif); | 
|  | } |