|  | /* | 
|  | * BQ27x00 battery driver | 
|  | * | 
|  | * Copyright (C) 2008 Rodolfo Giometti <giometti@linux.it> | 
|  | * Copyright (C) 2008 Eurotech S.p.A. <info@eurotech.it> | 
|  | * Copyright (C) 2010-2011 Lars-Peter Clausen <lars@metafoo.de> | 
|  | * Copyright (C) 2011 Pali Rohár <pali.rohar@gmail.com> | 
|  | * | 
|  | * Based on a previous work by Copyright (C) 2008 Texas Instruments, Inc. | 
|  | * | 
|  | * This package is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR | 
|  | * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED | 
|  | * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. | 
|  | * | 
|  | * Datasheets: | 
|  | * http://focus.ti.com/docs/prod/folders/print/bq27000.html | 
|  | * http://focus.ti.com/docs/prod/folders/print/bq27500.html | 
|  | * http://www.ti.com/product/bq27425-g1 | 
|  | * http://www.ti.com/product/BQ27742-G1 | 
|  | * http://www.ti.com/product/BQ27510-G3 | 
|  | */ | 
|  |  | 
|  | #include <linux/device.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/param.h> | 
|  | #include <linux/jiffies.h> | 
|  | #include <linux/workqueue.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/power_supply.h> | 
|  | #include <linux/idr.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/slab.h> | 
|  | #include <asm/unaligned.h> | 
|  |  | 
|  | #include <linux/power/bq27x00_battery.h> | 
|  |  | 
|  | #define DRIVER_VERSION			"1.2.0" | 
|  |  | 
|  | #define BQ27x00_REG_TEMP		0x06 | 
|  | #define BQ27x00_REG_VOLT		0x08 | 
|  | #define BQ27x00_REG_AI			0x14 | 
|  | #define BQ27x00_REG_FLAGS		0x0A | 
|  | #define BQ27x00_REG_TTE			0x16 | 
|  | #define BQ27x00_REG_TTF			0x18 | 
|  | #define BQ27x00_REG_TTECP		0x26 | 
|  | #define BQ27x00_REG_NAC			0x0C /* Nominal available capacity */ | 
|  | #define BQ27x00_REG_LMD			0x12 /* Last measured discharge */ | 
|  | #define BQ27x00_REG_CYCT		0x2A /* Cycle count total */ | 
|  | #define BQ27x00_REG_AE			0x22 /* Available energy */ | 
|  | #define BQ27x00_POWER_AVG		0x24 | 
|  |  | 
|  | #define BQ27000_REG_RSOC		0x0B /* Relative State-of-Charge */ | 
|  | #define BQ27000_REG_ILMD		0x76 /* Initial last measured discharge */ | 
|  | #define BQ27000_FLAG_EDVF		BIT(0) /* Final End-of-Discharge-Voltage flag */ | 
|  | #define BQ27000_FLAG_EDV1		BIT(1) /* First End-of-Discharge-Voltage flag */ | 
|  | #define BQ27000_FLAG_CI			BIT(4) /* Capacity Inaccurate flag */ | 
|  | #define BQ27000_FLAG_FC			BIT(5) | 
|  | #define BQ27000_FLAG_CHGS		BIT(7) /* Charge state flag */ | 
|  |  | 
|  | #define BQ27500_REG_SOC			0x2C | 
|  | #define BQ27500_REG_DCAP		0x3C /* Design capacity */ | 
|  | #define BQ27500_FLAG_DSC		BIT(0) | 
|  | #define BQ27500_FLAG_SOCF		BIT(1) /* State-of-Charge threshold final */ | 
|  | #define BQ27500_FLAG_SOC1		BIT(2) /* State-of-Charge threshold 1 */ | 
|  | #define BQ27500_FLAG_FC			BIT(9) | 
|  | #define BQ27500_FLAG_OTC		BIT(15) | 
|  |  | 
|  | #define BQ27742_POWER_AVG		0x76 | 
|  |  | 
|  | #define BQ27510_REG_SOC			0x20 | 
|  | #define BQ27510_REG_DCAP		0x2E /* Design capacity */ | 
|  | #define BQ27510_REG_CYCT		0x1E /* Cycle count total */ | 
|  |  | 
|  | /* bq27425 register addresses are same as bq27x00 addresses minus 4 */ | 
|  | #define BQ27425_REG_OFFSET		0x04 | 
|  | #define BQ27425_REG_SOC		(0x1C + BQ27425_REG_OFFSET) | 
|  | #define BQ27425_REG_DCAP		(0x3C + BQ27425_REG_OFFSET) | 
|  |  | 
|  | #define BQ27000_RS			20 /* Resistor sense */ | 
|  | #define BQ27x00_POWER_CONSTANT		(256 * 29200 / 1000) | 
|  |  | 
|  | struct bq27x00_device_info; | 
|  | struct bq27x00_access_methods { | 
|  | int (*read)(struct bq27x00_device_info *di, u8 reg, bool single); | 
|  | }; | 
|  |  | 
|  | enum bq27x00_chip { BQ27000, BQ27500, BQ27425, BQ27742, BQ27510}; | 
|  |  | 
|  | struct bq27x00_reg_cache { | 
|  | int temperature; | 
|  | int time_to_empty; | 
|  | int time_to_empty_avg; | 
|  | int time_to_full; | 
|  | int charge_full; | 
|  | int cycle_count; | 
|  | int capacity; | 
|  | int energy; | 
|  | int flags; | 
|  | int power_avg; | 
|  | int health; | 
|  | }; | 
|  |  | 
|  | struct bq27x00_device_info { | 
|  | struct device 		*dev; | 
|  | int			id; | 
|  | enum bq27x00_chip	chip; | 
|  |  | 
|  | struct bq27x00_reg_cache cache; | 
|  | int charge_design_full; | 
|  |  | 
|  | unsigned long last_update; | 
|  | struct delayed_work work; | 
|  |  | 
|  | struct power_supply	*bat; | 
|  |  | 
|  | struct bq27x00_access_methods bus; | 
|  |  | 
|  | struct mutex lock; | 
|  | }; | 
|  |  | 
|  | static enum power_supply_property bq27x00_battery_props[] = { | 
|  | POWER_SUPPLY_PROP_STATUS, | 
|  | POWER_SUPPLY_PROP_PRESENT, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_NOW, | 
|  | POWER_SUPPLY_PROP_CURRENT_NOW, | 
|  | POWER_SUPPLY_PROP_CAPACITY, | 
|  | POWER_SUPPLY_PROP_CAPACITY_LEVEL, | 
|  | POWER_SUPPLY_PROP_TEMP, | 
|  | POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, | 
|  | POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, | 
|  | POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, | 
|  | POWER_SUPPLY_PROP_TECHNOLOGY, | 
|  | POWER_SUPPLY_PROP_CHARGE_FULL, | 
|  | POWER_SUPPLY_PROP_CHARGE_NOW, | 
|  | POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, | 
|  | POWER_SUPPLY_PROP_CYCLE_COUNT, | 
|  | POWER_SUPPLY_PROP_ENERGY_NOW, | 
|  | POWER_SUPPLY_PROP_POWER_AVG, | 
|  | POWER_SUPPLY_PROP_HEALTH, | 
|  | }; | 
|  |  | 
|  | static enum power_supply_property bq27425_battery_props[] = { | 
|  | POWER_SUPPLY_PROP_STATUS, | 
|  | POWER_SUPPLY_PROP_PRESENT, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_NOW, | 
|  | POWER_SUPPLY_PROP_CURRENT_NOW, | 
|  | POWER_SUPPLY_PROP_CAPACITY, | 
|  | POWER_SUPPLY_PROP_CAPACITY_LEVEL, | 
|  | POWER_SUPPLY_PROP_TEMP, | 
|  | POWER_SUPPLY_PROP_TECHNOLOGY, | 
|  | POWER_SUPPLY_PROP_CHARGE_FULL, | 
|  | POWER_SUPPLY_PROP_CHARGE_NOW, | 
|  | POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, | 
|  | }; | 
|  |  | 
|  | static enum power_supply_property bq27742_battery_props[] = { | 
|  | POWER_SUPPLY_PROP_STATUS, | 
|  | POWER_SUPPLY_PROP_PRESENT, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_NOW, | 
|  | POWER_SUPPLY_PROP_CURRENT_NOW, | 
|  | POWER_SUPPLY_PROP_CAPACITY, | 
|  | POWER_SUPPLY_PROP_CAPACITY_LEVEL, | 
|  | POWER_SUPPLY_PROP_TEMP, | 
|  | POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, | 
|  | POWER_SUPPLY_PROP_TECHNOLOGY, | 
|  | POWER_SUPPLY_PROP_CHARGE_FULL, | 
|  | POWER_SUPPLY_PROP_CHARGE_NOW, | 
|  | POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, | 
|  | POWER_SUPPLY_PROP_CYCLE_COUNT, | 
|  | POWER_SUPPLY_PROP_POWER_AVG, | 
|  | POWER_SUPPLY_PROP_HEALTH, | 
|  | }; | 
|  |  | 
|  | static enum power_supply_property bq27510_battery_props[] = { | 
|  | POWER_SUPPLY_PROP_STATUS, | 
|  | POWER_SUPPLY_PROP_PRESENT, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_NOW, | 
|  | POWER_SUPPLY_PROP_CURRENT_NOW, | 
|  | POWER_SUPPLY_PROP_CAPACITY, | 
|  | POWER_SUPPLY_PROP_CAPACITY_LEVEL, | 
|  | POWER_SUPPLY_PROP_TEMP, | 
|  | POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, | 
|  | POWER_SUPPLY_PROP_TECHNOLOGY, | 
|  | POWER_SUPPLY_PROP_CHARGE_FULL, | 
|  | POWER_SUPPLY_PROP_CHARGE_NOW, | 
|  | POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, | 
|  | POWER_SUPPLY_PROP_CYCLE_COUNT, | 
|  | POWER_SUPPLY_PROP_POWER_AVG, | 
|  | POWER_SUPPLY_PROP_HEALTH, | 
|  | }; | 
|  |  | 
|  | static unsigned int poll_interval = 360; | 
|  | module_param(poll_interval, uint, 0644); | 
|  | MODULE_PARM_DESC(poll_interval, "battery poll interval in seconds - " \ | 
|  | "0 disables polling"); | 
|  |  | 
|  | /* | 
|  | * Common code for BQ27x00 devices | 
|  | */ | 
|  |  | 
|  | static inline int bq27x00_read(struct bq27x00_device_info *di, u8 reg, | 
|  | bool single) | 
|  | { | 
|  | if (di->chip == BQ27425) | 
|  | return di->bus.read(di, reg - BQ27425_REG_OFFSET, single); | 
|  | return di->bus.read(di, reg, single); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Higher versions of the chip like BQ27425 and BQ27500 | 
|  | * differ from BQ27000 and BQ27200 in calculation of certain | 
|  | * parameters. Hence we need to check for the chip type. | 
|  | */ | 
|  | static bool bq27xxx_is_chip_version_higher(struct bq27x00_device_info *di) | 
|  | { | 
|  | if (di->chip == BQ27425 || di->chip == BQ27500 || di->chip == BQ27742 | 
|  | || di->chip == BQ27510) | 
|  | return true; | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Return the battery Relative State-of-Charge | 
|  | * Or < 0 if something fails. | 
|  | */ | 
|  | static int bq27x00_battery_read_rsoc(struct bq27x00_device_info *di) | 
|  | { | 
|  | int rsoc; | 
|  |  | 
|  | if (di->chip == BQ27500 || di->chip == BQ27742) | 
|  | rsoc = bq27x00_read(di, BQ27500_REG_SOC, false); | 
|  | else if (di->chip == BQ27510) | 
|  | rsoc = bq27x00_read(di, BQ27510_REG_SOC, false); | 
|  | else if (di->chip == BQ27425) | 
|  | rsoc = bq27x00_read(di, BQ27425_REG_SOC, false); | 
|  | else | 
|  | rsoc = bq27x00_read(di, BQ27000_REG_RSOC, true); | 
|  |  | 
|  | if (rsoc < 0) | 
|  | dev_dbg(di->dev, "error reading relative State-of-Charge\n"); | 
|  |  | 
|  | return rsoc; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Return a battery charge value in µAh | 
|  | * Or < 0 if something fails. | 
|  | */ | 
|  | static int bq27x00_battery_read_charge(struct bq27x00_device_info *di, u8 reg) | 
|  | { | 
|  | int charge; | 
|  |  | 
|  | charge = bq27x00_read(di, reg, false); | 
|  | if (charge < 0) { | 
|  | dev_dbg(di->dev, "error reading charge register %02x: %d\n", | 
|  | reg, charge); | 
|  | return charge; | 
|  | } | 
|  |  | 
|  | if (bq27xxx_is_chip_version_higher(di)) | 
|  | charge *= 1000; | 
|  | else | 
|  | charge = charge * 3570 / BQ27000_RS; | 
|  |  | 
|  | return charge; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Return the battery Nominal available capaciy in µAh | 
|  | * Or < 0 if something fails. | 
|  | */ | 
|  | static inline int bq27x00_battery_read_nac(struct bq27x00_device_info *di) | 
|  | { | 
|  | int flags; | 
|  | bool is_bq27500 = di->chip == BQ27500; | 
|  | bool is_bq27742 = di->chip == BQ27742; | 
|  | bool is_higher = bq27xxx_is_chip_version_higher(di); | 
|  | bool flags_1b = !(is_bq27500 || is_bq27742); | 
|  |  | 
|  | flags = bq27x00_read(di, BQ27x00_REG_FLAGS, flags_1b); | 
|  | if (flags >= 0 && !is_higher && (flags & BQ27000_FLAG_CI)) | 
|  | return -ENODATA; | 
|  |  | 
|  | return bq27x00_battery_read_charge(di, BQ27x00_REG_NAC); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Return the battery Last measured discharge in µAh | 
|  | * Or < 0 if something fails. | 
|  | */ | 
|  | static inline int bq27x00_battery_read_lmd(struct bq27x00_device_info *di) | 
|  | { | 
|  | return bq27x00_battery_read_charge(di, BQ27x00_REG_LMD); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Return the battery Initial last measured discharge in µAh | 
|  | * Or < 0 if something fails. | 
|  | */ | 
|  | static int bq27x00_battery_read_ilmd(struct bq27x00_device_info *di) | 
|  | { | 
|  | int ilmd; | 
|  |  | 
|  | if (bq27xxx_is_chip_version_higher(di)) { | 
|  | if (di->chip == BQ27425) | 
|  | ilmd = bq27x00_read(di, BQ27425_REG_DCAP, false); | 
|  | else if (di->chip == BQ27510) | 
|  | ilmd = bq27x00_read(di, BQ27510_REG_DCAP, false); | 
|  | else | 
|  | ilmd = bq27x00_read(di, BQ27500_REG_DCAP, false); | 
|  | } else | 
|  | ilmd = bq27x00_read(di, BQ27000_REG_ILMD, true); | 
|  |  | 
|  | if (ilmd < 0) { | 
|  | dev_dbg(di->dev, "error reading initial last measured discharge\n"); | 
|  | return ilmd; | 
|  | } | 
|  |  | 
|  | if (bq27xxx_is_chip_version_higher(di)) | 
|  | ilmd *= 1000; | 
|  | else | 
|  | ilmd = ilmd * 256 * 3570 / BQ27000_RS; | 
|  |  | 
|  | return ilmd; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Return the battery Available energy in µWh | 
|  | * Or < 0 if something fails. | 
|  | */ | 
|  | static int bq27x00_battery_read_energy(struct bq27x00_device_info *di) | 
|  | { | 
|  | int ae; | 
|  |  | 
|  | ae = bq27x00_read(di, BQ27x00_REG_AE, false); | 
|  | if (ae < 0) { | 
|  | dev_dbg(di->dev, "error reading available energy\n"); | 
|  | return ae; | 
|  | } | 
|  |  | 
|  | if (di->chip == BQ27500) | 
|  | ae *= 1000; | 
|  | else | 
|  | ae = ae * 29200 / BQ27000_RS; | 
|  |  | 
|  | return ae; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Return the battery temperature in tenths of degree Kelvin | 
|  | * Or < 0 if something fails. | 
|  | */ | 
|  | static int bq27x00_battery_read_temperature(struct bq27x00_device_info *di) | 
|  | { | 
|  | int temp; | 
|  |  | 
|  | temp = bq27x00_read(di, BQ27x00_REG_TEMP, false); | 
|  | if (temp < 0) { | 
|  | dev_err(di->dev, "error reading temperature\n"); | 
|  | return temp; | 
|  | } | 
|  |  | 
|  | if (!bq27xxx_is_chip_version_higher(di)) | 
|  | temp = 5 * temp / 2; | 
|  |  | 
|  | return temp; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Return the battery Cycle count total | 
|  | * Or < 0 if something fails. | 
|  | */ | 
|  | static int bq27x00_battery_read_cyct(struct bq27x00_device_info *di) | 
|  | { | 
|  | int cyct; | 
|  |  | 
|  | if (di->chip == BQ27510) | 
|  | cyct = bq27x00_read(di, BQ27510_REG_CYCT, false); | 
|  | else | 
|  | cyct = bq27x00_read(di, BQ27x00_REG_CYCT, false); | 
|  | if (cyct < 0) | 
|  | dev_err(di->dev, "error reading cycle count total\n"); | 
|  |  | 
|  | return cyct; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Read a time register. | 
|  | * Return < 0 if something fails. | 
|  | */ | 
|  | static int bq27x00_battery_read_time(struct bq27x00_device_info *di, u8 reg) | 
|  | { | 
|  | int tval; | 
|  |  | 
|  | tval = bq27x00_read(di, reg, false); | 
|  | if (tval < 0) { | 
|  | dev_dbg(di->dev, "error reading time register %02x: %d\n", | 
|  | reg, tval); | 
|  | return tval; | 
|  | } | 
|  |  | 
|  | if (tval == 65535) | 
|  | return -ENODATA; | 
|  |  | 
|  | return tval * 60; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Read a power avg register. | 
|  | * Return < 0 if something fails. | 
|  | */ | 
|  | static int bq27x00_battery_read_pwr_avg(struct bq27x00_device_info *di, u8 reg) | 
|  | { | 
|  | int tval; | 
|  |  | 
|  | tval = bq27x00_read(di, reg, false); | 
|  | if (tval < 0) { | 
|  | dev_err(di->dev, "error reading power avg rgister  %02x: %d\n", | 
|  | reg, tval); | 
|  | return tval; | 
|  | } | 
|  |  | 
|  | if (di->chip == BQ27500) | 
|  | return tval; | 
|  | else | 
|  | return (tval * BQ27x00_POWER_CONSTANT) / BQ27000_RS; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Read flag register. | 
|  | * Return < 0 if something fails. | 
|  | */ | 
|  | static int bq27x00_battery_read_health(struct bq27x00_device_info *di) | 
|  | { | 
|  | int tval; | 
|  |  | 
|  | tval = bq27x00_read(di, BQ27x00_REG_FLAGS, false); | 
|  | if (tval < 0) { | 
|  | dev_err(di->dev, "error reading flag register:%d\n", tval); | 
|  | return tval; | 
|  | } | 
|  |  | 
|  | if ((di->chip == BQ27500)) { | 
|  | if (tval & BQ27500_FLAG_SOCF) | 
|  | tval = POWER_SUPPLY_HEALTH_DEAD; | 
|  | else if (tval & BQ27500_FLAG_OTC) | 
|  | tval = POWER_SUPPLY_HEALTH_OVERHEAT; | 
|  | else | 
|  | tval = POWER_SUPPLY_HEALTH_GOOD; | 
|  | return tval; | 
|  | } else if (di->chip == BQ27510) { | 
|  | if (tval & BQ27500_FLAG_OTC) | 
|  | return POWER_SUPPLY_HEALTH_OVERHEAT; | 
|  | return POWER_SUPPLY_HEALTH_GOOD; | 
|  | } else { | 
|  | if (tval & BQ27000_FLAG_EDV1) | 
|  | tval = POWER_SUPPLY_HEALTH_DEAD; | 
|  | else | 
|  | tval = POWER_SUPPLY_HEALTH_GOOD; | 
|  | return tval; | 
|  | } | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static void bq27x00_update(struct bq27x00_device_info *di) | 
|  | { | 
|  | struct bq27x00_reg_cache cache = {0, }; | 
|  | bool is_bq27500 = di->chip == BQ27500; | 
|  | bool is_bq27510 = di->chip == BQ27510; | 
|  | bool is_bq27425 = di->chip == BQ27425; | 
|  | bool is_bq27742 = di->chip == BQ27742; | 
|  | bool flags_1b = !(is_bq27500 || is_bq27742); | 
|  |  | 
|  | cache.flags = bq27x00_read(di, BQ27x00_REG_FLAGS, flags_1b); | 
|  | if ((cache.flags & 0xff) == 0xff) | 
|  | /* read error */ | 
|  | cache.flags = -1; | 
|  | if (cache.flags >= 0) { | 
|  | if (!is_bq27500 && !is_bq27425 && !is_bq27742 && !is_bq27510 | 
|  | && (cache.flags & BQ27000_FLAG_CI)) { | 
|  | dev_info(di->dev, "battery is not calibrated! ignoring capacity values\n"); | 
|  | cache.capacity = -ENODATA; | 
|  | cache.energy = -ENODATA; | 
|  | cache.time_to_empty = -ENODATA; | 
|  | cache.time_to_empty_avg = -ENODATA; | 
|  | cache.time_to_full = -ENODATA; | 
|  | cache.charge_full = -ENODATA; | 
|  | cache.health = -ENODATA; | 
|  | } else { | 
|  | cache.capacity = bq27x00_battery_read_rsoc(di); | 
|  | if (is_bq27742 || is_bq27510) | 
|  | cache.time_to_empty = | 
|  | bq27x00_battery_read_time(di, | 
|  | BQ27x00_REG_TTE); | 
|  | else if (!is_bq27425) { | 
|  | cache.energy = bq27x00_battery_read_energy(di); | 
|  | cache.time_to_empty = | 
|  | bq27x00_battery_read_time(di, | 
|  | BQ27x00_REG_TTE); | 
|  | cache.time_to_empty_avg = | 
|  | bq27x00_battery_read_time(di, | 
|  | BQ27x00_REG_TTECP); | 
|  | cache.time_to_full = | 
|  | bq27x00_battery_read_time(di, | 
|  | BQ27x00_REG_TTF); | 
|  | } | 
|  | cache.charge_full = bq27x00_battery_read_lmd(di); | 
|  | cache.health = bq27x00_battery_read_health(di); | 
|  | } | 
|  | cache.temperature = bq27x00_battery_read_temperature(di); | 
|  | if (!is_bq27425) | 
|  | cache.cycle_count = bq27x00_battery_read_cyct(di); | 
|  | if (is_bq27742) | 
|  | cache.power_avg = | 
|  | bq27x00_battery_read_pwr_avg(di, | 
|  | BQ27742_POWER_AVG); | 
|  | else | 
|  | cache.power_avg = | 
|  | bq27x00_battery_read_pwr_avg(di, | 
|  | BQ27x00_POWER_AVG); | 
|  |  | 
|  | /* We only have to read charge design full once */ | 
|  | if (di->charge_design_full <= 0) | 
|  | di->charge_design_full = bq27x00_battery_read_ilmd(di); | 
|  | } | 
|  |  | 
|  | if (di->cache.capacity != cache.capacity) | 
|  | power_supply_changed(di->bat); | 
|  |  | 
|  | if (memcmp(&di->cache, &cache, sizeof(cache)) != 0) | 
|  | di->cache = cache; | 
|  |  | 
|  | di->last_update = jiffies; | 
|  | } | 
|  |  | 
|  | static void bq27x00_battery_poll(struct work_struct *work) | 
|  | { | 
|  | struct bq27x00_device_info *di = | 
|  | container_of(work, struct bq27x00_device_info, work.work); | 
|  |  | 
|  | bq27x00_update(di); | 
|  |  | 
|  | if (poll_interval > 0) { | 
|  | /* The timer does not have to be accurate. */ | 
|  | set_timer_slack(&di->work.timer, poll_interval * HZ / 4); | 
|  | schedule_delayed_work(&di->work, poll_interval * HZ); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Return the battery average current in µA | 
|  | * Note that current can be negative signed as well | 
|  | * Or 0 if something fails. | 
|  | */ | 
|  | static int bq27x00_battery_current(struct bq27x00_device_info *di, | 
|  | union power_supply_propval *val) | 
|  | { | 
|  | int curr; | 
|  | int flags; | 
|  |  | 
|  | curr = bq27x00_read(di, BQ27x00_REG_AI, false); | 
|  | if (curr < 0) { | 
|  | dev_err(di->dev, "error reading current\n"); | 
|  | return curr; | 
|  | } | 
|  |  | 
|  | if (bq27xxx_is_chip_version_higher(di)) { | 
|  | /* bq27500 returns signed value */ | 
|  | val->intval = (int)((s16)curr) * 1000; | 
|  | } else { | 
|  | flags = bq27x00_read(di, BQ27x00_REG_FLAGS, false); | 
|  | if (flags & BQ27000_FLAG_CHGS) { | 
|  | dev_dbg(di->dev, "negative current!\n"); | 
|  | curr = -curr; | 
|  | } | 
|  |  | 
|  | val->intval = curr * 3570 / BQ27000_RS; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int bq27x00_battery_status(struct bq27x00_device_info *di, | 
|  | union power_supply_propval *val) | 
|  | { | 
|  | int status; | 
|  |  | 
|  | if (bq27xxx_is_chip_version_higher(di)) { | 
|  | if (di->cache.flags & BQ27500_FLAG_FC) | 
|  | status = POWER_SUPPLY_STATUS_FULL; | 
|  | else if (di->cache.flags & BQ27500_FLAG_DSC) | 
|  | status = POWER_SUPPLY_STATUS_DISCHARGING; | 
|  | else | 
|  | status = POWER_SUPPLY_STATUS_CHARGING; | 
|  | } else { | 
|  | if (di->cache.flags & BQ27000_FLAG_FC) | 
|  | status = POWER_SUPPLY_STATUS_FULL; | 
|  | else if (di->cache.flags & BQ27000_FLAG_CHGS) | 
|  | status = POWER_SUPPLY_STATUS_CHARGING; | 
|  | else if (power_supply_am_i_supplied(di->bat)) | 
|  | status = POWER_SUPPLY_STATUS_NOT_CHARGING; | 
|  | else | 
|  | status = POWER_SUPPLY_STATUS_DISCHARGING; | 
|  | } | 
|  |  | 
|  | val->intval = status; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int bq27x00_battery_capacity_level(struct bq27x00_device_info *di, | 
|  | union power_supply_propval *val) | 
|  | { | 
|  | int level; | 
|  |  | 
|  | if (bq27xxx_is_chip_version_higher(di)) { | 
|  | if (di->cache.flags & BQ27500_FLAG_FC) | 
|  | level = POWER_SUPPLY_CAPACITY_LEVEL_FULL; | 
|  | else if (di->cache.flags & BQ27500_FLAG_SOC1) | 
|  | level = POWER_SUPPLY_CAPACITY_LEVEL_LOW; | 
|  | else if (di->cache.flags & BQ27500_FLAG_SOCF) | 
|  | level = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; | 
|  | else | 
|  | level = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; | 
|  | } else { | 
|  | if (di->cache.flags & BQ27000_FLAG_FC) | 
|  | level = POWER_SUPPLY_CAPACITY_LEVEL_FULL; | 
|  | else if (di->cache.flags & BQ27000_FLAG_EDV1) | 
|  | level = POWER_SUPPLY_CAPACITY_LEVEL_LOW; | 
|  | else if (di->cache.flags & BQ27000_FLAG_EDVF) | 
|  | level = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; | 
|  | else | 
|  | level = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; | 
|  | } | 
|  |  | 
|  | val->intval = level; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Return the battery Voltage in millivolts | 
|  | * Or < 0 if something fails. | 
|  | */ | 
|  | static int bq27x00_battery_voltage(struct bq27x00_device_info *di, | 
|  | union power_supply_propval *val) | 
|  | { | 
|  | int volt; | 
|  |  | 
|  | volt = bq27x00_read(di, BQ27x00_REG_VOLT, false); | 
|  | if (volt < 0) { | 
|  | dev_err(di->dev, "error reading voltage\n"); | 
|  | return volt; | 
|  | } | 
|  |  | 
|  | val->intval = volt * 1000; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int bq27x00_simple_value(int value, | 
|  | union power_supply_propval *val) | 
|  | { | 
|  | if (value < 0) | 
|  | return value; | 
|  |  | 
|  | val->intval = value; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int bq27x00_battery_get_property(struct power_supply *psy, | 
|  | enum power_supply_property psp, | 
|  | union power_supply_propval *val) | 
|  | { | 
|  | int ret = 0; | 
|  | struct bq27x00_device_info *di = power_supply_get_drvdata(psy); | 
|  |  | 
|  | mutex_lock(&di->lock); | 
|  | if (time_is_before_jiffies(di->last_update + 5 * HZ)) { | 
|  | cancel_delayed_work_sync(&di->work); | 
|  | bq27x00_battery_poll(&di->work.work); | 
|  | } | 
|  | mutex_unlock(&di->lock); | 
|  |  | 
|  | if (psp != POWER_SUPPLY_PROP_PRESENT && di->cache.flags < 0) | 
|  | return -ENODEV; | 
|  |  | 
|  | switch (psp) { | 
|  | case POWER_SUPPLY_PROP_STATUS: | 
|  | ret = bq27x00_battery_status(di, val); | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_VOLTAGE_NOW: | 
|  | ret = bq27x00_battery_voltage(di, val); | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_PRESENT: | 
|  | val->intval = di->cache.flags < 0 ? 0 : 1; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_CURRENT_NOW: | 
|  | ret = bq27x00_battery_current(di, val); | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_CAPACITY: | 
|  | ret = bq27x00_simple_value(di->cache.capacity, val); | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_CAPACITY_LEVEL: | 
|  | ret = bq27x00_battery_capacity_level(di, val); | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_TEMP: | 
|  | ret = bq27x00_simple_value(di->cache.temperature, val); | 
|  | if (ret == 0) | 
|  | val->intval -= 2731; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW: | 
|  | ret = bq27x00_simple_value(di->cache.time_to_empty, val); | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG: | 
|  | ret = bq27x00_simple_value(di->cache.time_to_empty_avg, val); | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW: | 
|  | ret = bq27x00_simple_value(di->cache.time_to_full, val); | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_TECHNOLOGY: | 
|  | val->intval = POWER_SUPPLY_TECHNOLOGY_LION; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_CHARGE_NOW: | 
|  | ret = bq27x00_simple_value(bq27x00_battery_read_nac(di), val); | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_CHARGE_FULL: | 
|  | ret = bq27x00_simple_value(di->cache.charge_full, val); | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: | 
|  | ret = bq27x00_simple_value(di->charge_design_full, val); | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_CYCLE_COUNT: | 
|  | ret = bq27x00_simple_value(di->cache.cycle_count, val); | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_ENERGY_NOW: | 
|  | ret = bq27x00_simple_value(di->cache.energy, val); | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_POWER_AVG: | 
|  | ret = bq27x00_simple_value(di->cache.power_avg, val); | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_HEALTH: | 
|  | ret = bq27x00_simple_value(di->cache.health, val); | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void bq27x00_external_power_changed(struct power_supply *psy) | 
|  | { | 
|  | struct bq27x00_device_info *di = power_supply_get_drvdata(psy); | 
|  |  | 
|  | cancel_delayed_work_sync(&di->work); | 
|  | schedule_delayed_work(&di->work, 0); | 
|  | } | 
|  |  | 
|  | static int bq27x00_powersupply_init(struct bq27x00_device_info *di, | 
|  | const char *name) | 
|  | { | 
|  | int ret; | 
|  | struct power_supply_desc *psy_desc; | 
|  | struct power_supply_config psy_cfg = { .drv_data = di, }; | 
|  |  | 
|  | psy_desc = devm_kzalloc(di->dev, sizeof(*psy_desc), GFP_KERNEL); | 
|  | if (!psy_desc) | 
|  | return -ENOMEM; | 
|  |  | 
|  | psy_desc->name = name; | 
|  | psy_desc->type = POWER_SUPPLY_TYPE_BATTERY; | 
|  | if (di->chip == BQ27425) { | 
|  | psy_desc->properties = bq27425_battery_props; | 
|  | psy_desc->num_properties = ARRAY_SIZE(bq27425_battery_props); | 
|  | } else if (di->chip == BQ27742) { | 
|  | psy_desc->properties = bq27742_battery_props; | 
|  | psy_desc->num_properties = ARRAY_SIZE(bq27742_battery_props); | 
|  | } else if (di->chip == BQ27510) { | 
|  | psy_desc->properties = bq27510_battery_props; | 
|  | psy_desc->num_properties = ARRAY_SIZE(bq27510_battery_props); | 
|  | } else { | 
|  | psy_desc->properties = bq27x00_battery_props; | 
|  | psy_desc->num_properties = ARRAY_SIZE(bq27x00_battery_props); | 
|  | } | 
|  | psy_desc->get_property = bq27x00_battery_get_property; | 
|  | psy_desc->external_power_changed = bq27x00_external_power_changed; | 
|  |  | 
|  | INIT_DELAYED_WORK(&di->work, bq27x00_battery_poll); | 
|  | mutex_init(&di->lock); | 
|  |  | 
|  | di->bat = power_supply_register_no_ws(di->dev, psy_desc, &psy_cfg); | 
|  | if (IS_ERR(di->bat)) { | 
|  | ret = PTR_ERR(di->bat); | 
|  | dev_err(di->dev, "failed to register battery: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | dev_info(di->dev, "support ver. %s enabled\n", DRIVER_VERSION); | 
|  |  | 
|  | bq27x00_update(di); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void bq27x00_powersupply_unregister(struct bq27x00_device_info *di) | 
|  | { | 
|  | /* | 
|  | * power_supply_unregister call bq27x00_battery_get_property which | 
|  | * call bq27x00_battery_poll. | 
|  | * Make sure that bq27x00_battery_poll will not call | 
|  | * schedule_delayed_work again after unregister (which cause OOPS). | 
|  | */ | 
|  | poll_interval = 0; | 
|  |  | 
|  | cancel_delayed_work_sync(&di->work); | 
|  |  | 
|  | power_supply_unregister(di->bat); | 
|  |  | 
|  | mutex_destroy(&di->lock); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* i2c specific code */ | 
|  | #ifdef CONFIG_BATTERY_BQ27X00_I2C | 
|  |  | 
|  | /* If the system has several batteries we need a different name for each | 
|  | * of them... | 
|  | */ | 
|  | static DEFINE_IDR(battery_id); | 
|  | static DEFINE_MUTEX(battery_mutex); | 
|  |  | 
|  | static int bq27x00_read_i2c(struct bq27x00_device_info *di, u8 reg, bool single) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(di->dev); | 
|  | struct i2c_msg msg[2]; | 
|  | unsigned char data[2]; | 
|  | int ret; | 
|  |  | 
|  | if (!client->adapter) | 
|  | return -ENODEV; | 
|  |  | 
|  | msg[0].addr = client->addr; | 
|  | msg[0].flags = 0; | 
|  | msg[0].buf = ® | 
|  | msg[0].len = sizeof(reg); | 
|  | msg[1].addr = client->addr; | 
|  | msg[1].flags = I2C_M_RD; | 
|  | msg[1].buf = data; | 
|  | if (single) | 
|  | msg[1].len = 1; | 
|  | else | 
|  | msg[1].len = 2; | 
|  |  | 
|  | ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | if (!single) | 
|  | ret = get_unaligned_le16(data); | 
|  | else | 
|  | ret = data[0]; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int bq27x00_battery_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | char *name; | 
|  | struct bq27x00_device_info *di; | 
|  | int num; | 
|  | int retval = 0; | 
|  |  | 
|  | /* Get new ID for the new battery device */ | 
|  | mutex_lock(&battery_mutex); | 
|  | num = idr_alloc(&battery_id, client, 0, 0, GFP_KERNEL); | 
|  | mutex_unlock(&battery_mutex); | 
|  | if (num < 0) | 
|  | return num; | 
|  |  | 
|  | name = devm_kasprintf(&client->dev, GFP_KERNEL, "%s-%d", id->name, num); | 
|  | if (!name) { | 
|  | dev_err(&client->dev, "failed to allocate device name\n"); | 
|  | retval = -ENOMEM; | 
|  | goto batt_failed; | 
|  | } | 
|  |  | 
|  | di = devm_kzalloc(&client->dev, sizeof(*di), GFP_KERNEL); | 
|  | if (!di) { | 
|  | dev_err(&client->dev, "failed to allocate device info data\n"); | 
|  | retval = -ENOMEM; | 
|  | goto batt_failed; | 
|  | } | 
|  |  | 
|  | di->id = num; | 
|  | di->dev = &client->dev; | 
|  | di->chip = id->driver_data; | 
|  | di->bus.read = &bq27x00_read_i2c; | 
|  |  | 
|  | retval = bq27x00_powersupply_init(di, name); | 
|  | if (retval) | 
|  | goto batt_failed; | 
|  |  | 
|  | i2c_set_clientdata(client, di); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | batt_failed: | 
|  | mutex_lock(&battery_mutex); | 
|  | idr_remove(&battery_id, num); | 
|  | mutex_unlock(&battery_mutex); | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static int bq27x00_battery_remove(struct i2c_client *client) | 
|  | { | 
|  | struct bq27x00_device_info *di = i2c_get_clientdata(client); | 
|  |  | 
|  | bq27x00_powersupply_unregister(di); | 
|  |  | 
|  | mutex_lock(&battery_mutex); | 
|  | idr_remove(&battery_id, di->id); | 
|  | mutex_unlock(&battery_mutex); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id bq27x00_id[] = { | 
|  | { "bq27200", BQ27000 },	/* bq27200 is same as bq27000, but with i2c */ | 
|  | { "bq27500", BQ27500 }, | 
|  | { "bq27425", BQ27425 }, | 
|  | { "bq27742", BQ27742 }, | 
|  | { "bq27510", BQ27510 }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, bq27x00_id); | 
|  |  | 
|  | static struct i2c_driver bq27x00_battery_driver = { | 
|  | .driver = { | 
|  | .name = "bq27x00-battery", | 
|  | }, | 
|  | .probe = bq27x00_battery_probe, | 
|  | .remove = bq27x00_battery_remove, | 
|  | .id_table = bq27x00_id, | 
|  | }; | 
|  |  | 
|  | static inline int bq27x00_battery_i2c_init(void) | 
|  | { | 
|  | int ret = i2c_add_driver(&bq27x00_battery_driver); | 
|  | if (ret) | 
|  | printk(KERN_ERR "Unable to register BQ27x00 i2c driver\n"); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static inline void bq27x00_battery_i2c_exit(void) | 
|  | { | 
|  | i2c_del_driver(&bq27x00_battery_driver); | 
|  | } | 
|  |  | 
|  | #else | 
|  |  | 
|  | static inline int bq27x00_battery_i2c_init(void) { return 0; } | 
|  | static inline void bq27x00_battery_i2c_exit(void) {}; | 
|  |  | 
|  | #endif | 
|  |  | 
|  | /* platform specific code */ | 
|  | #ifdef CONFIG_BATTERY_BQ27X00_PLATFORM | 
|  |  | 
|  | static int bq27000_read_platform(struct bq27x00_device_info *di, u8 reg, | 
|  | bool single) | 
|  | { | 
|  | struct device *dev = di->dev; | 
|  | struct bq27000_platform_data *pdata = dev->platform_data; | 
|  | unsigned int timeout = 3; | 
|  | int upper, lower; | 
|  | int temp; | 
|  |  | 
|  | if (!single) { | 
|  | /* Make sure the value has not changed in between reading the | 
|  | * lower and the upper part */ | 
|  | upper = pdata->read(dev, reg + 1); | 
|  | do { | 
|  | temp = upper; | 
|  | if (upper < 0) | 
|  | return upper; | 
|  |  | 
|  | lower = pdata->read(dev, reg); | 
|  | if (lower < 0) | 
|  | return lower; | 
|  |  | 
|  | upper = pdata->read(dev, reg + 1); | 
|  | } while (temp != upper && --timeout); | 
|  |  | 
|  | if (timeout == 0) | 
|  | return -EIO; | 
|  |  | 
|  | return (upper << 8) | lower; | 
|  | } | 
|  |  | 
|  | return pdata->read(dev, reg); | 
|  | } | 
|  |  | 
|  | static int bq27000_battery_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct bq27x00_device_info *di; | 
|  | struct bq27000_platform_data *pdata = pdev->dev.platform_data; | 
|  | const char *name; | 
|  |  | 
|  | if (!pdata) { | 
|  | dev_err(&pdev->dev, "no platform_data supplied\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (!pdata->read) { | 
|  | dev_err(&pdev->dev, "no hdq read callback supplied\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL); | 
|  | if (!di) { | 
|  | dev_err(&pdev->dev, "failed to allocate device info data\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | platform_set_drvdata(pdev, di); | 
|  |  | 
|  | di->dev = &pdev->dev; | 
|  | di->chip = BQ27000; | 
|  |  | 
|  | name = pdata->name ?: dev_name(&pdev->dev); | 
|  | di->bus.read = &bq27000_read_platform; | 
|  |  | 
|  | return bq27x00_powersupply_init(di, name); | 
|  | } | 
|  |  | 
|  | static int bq27000_battery_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct bq27x00_device_info *di = platform_get_drvdata(pdev); | 
|  |  | 
|  | bq27x00_powersupply_unregister(di); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_driver bq27000_battery_driver = { | 
|  | .probe	= bq27000_battery_probe, | 
|  | .remove = bq27000_battery_remove, | 
|  | .driver = { | 
|  | .name = "bq27000-battery", | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static inline int bq27x00_battery_platform_init(void) | 
|  | { | 
|  | int ret = platform_driver_register(&bq27000_battery_driver); | 
|  | if (ret) | 
|  | printk(KERN_ERR "Unable to register BQ27000 platform driver\n"); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static inline void bq27x00_battery_platform_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&bq27000_battery_driver); | 
|  | } | 
|  |  | 
|  | #else | 
|  |  | 
|  | static inline int bq27x00_battery_platform_init(void) { return 0; } | 
|  | static inline void bq27x00_battery_platform_exit(void) {}; | 
|  |  | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Module stuff | 
|  | */ | 
|  |  | 
|  | static int __init bq27x00_battery_init(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = bq27x00_battery_i2c_init(); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = bq27x00_battery_platform_init(); | 
|  | if (ret) | 
|  | bq27x00_battery_i2c_exit(); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | module_init(bq27x00_battery_init); | 
|  |  | 
|  | static void __exit bq27x00_battery_exit(void) | 
|  | { | 
|  | bq27x00_battery_platform_exit(); | 
|  | bq27x00_battery_i2c_exit(); | 
|  | } | 
|  | module_exit(bq27x00_battery_exit); | 
|  |  | 
|  | #ifdef CONFIG_BATTERY_BQ27X00_PLATFORM | 
|  | MODULE_ALIAS("platform:bq27000-battery"); | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_BATTERY_BQ27X00_I2C | 
|  | MODULE_ALIAS("i2c:bq27000-battery"); | 
|  | #endif | 
|  |  | 
|  | MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>"); | 
|  | MODULE_DESCRIPTION("BQ27x00 battery monitor driver"); | 
|  | MODULE_LICENSE("GPL"); |