arch/arm64/boot/dts/freescale/fsl-imx8mq-evk-lcdif-rm67191.dts

/*
 * Copyright 2017 NXP
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include "fsl-imx8mq-evk.dts"

/ {
	display-subsystem {
		status = "disabled";
	};
};

&irqsteer_dcss {
	status = "disabled";
};

&dcss {
	status = "disabled";
};

&hdmi {
	status = "disabled";
};

&hdmi_cec {
	status = "disabled";
};

&lcdif {
	status = "okay";

	assigned-clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL_SRC>,
			  <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
			  <&clk IMX8MQ_VIDEO_PLL1>;
	assigned-clock-parents = <&clk IMX8MQ_VIDEO_PLL1_OUT>,
				 <&clk IMX8MQ_CLK_25M>;
	assigned-clock-rate = <120000000>,
			      <0>,
			      <599999999>;

	port@0 {
		lcdif_mipi_dsi: mipi-dsi-endpoint {
			remote-endpoint = <&mipi_dsi_in>;
		};
	};
};

&mipi_dsi_phy {
	status = "okay";
};

&mipi_dsi {
	status = "okay";
	as_bridge;
	sync-pol = <1>;
	assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF_SRC>,
			  <&clk IMX8MQ_CLK_DSI_CORE_SRC>,
			  <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
			  <&clk IMX8MQ_VIDEO_PLL1>;
	assigned-clock-parents = <&clk IMX8MQ_VIDEO_PLL1_OUT>,
				 <&clk IMX8MQ_SYS1_PLL_266M>,
				 <&clk IMX8MQ_CLK_25M>;
	assigned-clock-rates = <24000000>,
			       <266000000>,
			       <0>,
			       <599999999>;

	port@1 {
		mipi_dsi_in: endpoint {
			remote-endpoint = <&lcdif_mipi_dsi>;
		};
	};
};

&mipi_dsi_bridge {
	status = "okay";

	panel@0 {
		compatible = "raydium,rm67191";
		reg = <0>;
		pinctrl-0 = <&pinctrl_mipi_dsi_en>;
		reset-gpio = <&gpio5 6 GPIO_ACTIVE_HIGH>;
		dsi-lanes = <4>;
		panel-width-mm = <68>;
		panel-height-mm = <121>;
		port {
			panel1_in: endpoint {
				remote-endpoint = <&mipi_dsi_bridge_out>;
			};
		};
	};

	port@1 {
		mipi_dsi_bridge_out: endpoint {
			remote-endpoint = <&panel1_in>;
		};
	};
};

&iomuxc {
	imx8mq-evk {
		pinctrl_mipi_dsi_en: mipi_dsi_en {
			fsl,pins = <
				MX8MQ_IOMUXC_ECSPI1_SCLK_GPIO5_IO6	0x16
			>;
		};
	};
};